M2012SA1W01 Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The M2012SA1W01 is a panel-mount toggle switch manufactured by NKK Switches with SPDT (Single Pole Double Throw) configuration. This component features a 6A AC / 4A DC current rating at 125V AC / 30V DC, non-illuminated design, and solder lug termination. The product is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance and new design implementations where this functionality is required.

Key Parameters

Parameter	Value
Manufacturer Part Number	M2012SA1W01
Manufacturer	NKK Switches
Circuit Configuration	SPDT
Switch Function	On-On
Current Rating (AC)	6A
Current Rating (DC)	4A
Voltage Rating (AC)	125V
Voltage Rating (DC)	30V
Mounting Type	Panel Mount
Panel Cutout Diameter	6.50mm
Bushing Thread	1/4-40
Termination Style	Solder Lug
Operating Temperature Range	-30°C to 85°C
Electrical Life	25,000 Cycles
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the M2012SA1W01 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

Circuit configuration: SPDT
Switch function: On-On
Mounting type: Panel Mount
Termination style: Solder Lug
Bushing thread: 1/4-40
Panel cutout diameter: 6.35mm or 6.50mm (compatible with standard panel openings)
Operating temperature range: -30°C to 85°C minimum

Electrical Performance Parameters:

Current rating must meet or exceed 6A AC / 4A DC
Voltage rating must meet or exceed 125V AC / 30V DC
Electrical life cycle rating

Substitute parts are grouped into two categories based on electrical performance:

Group A - Full Performance Equivalents (5A AC/DC at 120V AC / 28V DC or higher): These parts meet or closely approach the original electrical specifications and are suitable for direct replacement in most applications.

Group B - Reduced Performance Substitutes (0.4VA at 20V AC/DC): These parts have significantly lower electrical ratings and are suitable only for low-power signal switching applications where the original 6A/125V capability is not required.

Parameter Comparison

Part Number	Manufacturer	Current Rating (AC/DC)	Voltage Rating (AC/DC)	Actuator Type	Actuator Length (mm)	Panel Cutout Dia (mm)	Electrical Life (Cycles)	Product Status	RoHS Status
M2012SA1W01	NKK Switches	6A / 4A	125V / 30V	Standard Round	12.28	6.50	25,000	Obsolete	ROHS3
100SP1T1B6M1QEH	E-Switch	5A	120V / 28V	Standard Round	10.41	6.35	40,000	Active	ROHS3
100SP1T6B11M1QEH	E-Switch	5A	120V / 28V	Flat Anti-Rotation	12.30	6.35	40,000	Active	ROHS3
100SP1T6B11M1REH	E-Switch	0.4VA	20V / 20V	Flat Anti-Rotation	12.30	6.35	40,000	Active	ROHS3
34ASP11B5M1QT	Grayhill Inc.	5A	125V / 28V	Standard Round	10.41	6.35	40,000	Active	RoHS
7101L40HZQE	C&K	5A	120V / 28V	Lever for Cap	—	6.35	100,000	Active	ROHS3
7101P3H3ZBE	C&K	0.4VA	20V / 20V	Flat Anti-Rotation	10.92	6.35	100,000	Active	ROHS3
7101P3H3ZGE2	C&K	5A	120V / 28V	Flat Anti-Rotation	10.92	6.35	100,000	Active	ROHS3
7101P3H3ZGE22	C&K	5A	120V / 28V	Flat Anti-Rotation	10.92	6.35	100,000	Active	ROHS3
7101P3H3ZGES	C&K	5A	120V / 28V	Flat Anti-Rotation	10.92	6.35	100,000	Active	ROHS3
7101P3H3ZQE	C&K	5A	120V / 28V	Flat Anti-Rotation	10.92	6.35	100,000	Active	ROHS3

Engineering Selection Recommendations

For Direct Replacement in Existing Designs:

The 34ASP11B5M1QT (Grayhill Inc.) provides the closest electrical match with 5A AC/DC rating at 125V AC / 28V DC, maintaining compatibility with the original M2012SA1W01 voltage specification. This part is active in production with ROHS3 compliance and extended electrical life of 40,000 cycles.

The E-Switch 100SP1T1B6M1QEH and C&K 7101P3H3ZGE2 series (7101P3H3ZGE2, 7101P3H3ZGE22, 7101P3H3ZGES, 7101P3H3ZQE) are functionally equivalent with 5A AC/DC ratings at 120V AC / 28V DC. All are active products with ROHS3 compliance. The C&K variants offer extended electrical life of 100,000 cycles.

For New Designs with Reduced Power Requirements:

The E-Switch 100SP1T6B11M1REH and C&K 7101P3H3ZBE are suitable only for applications requiring 0.4VA at 20V AC/DC. These parts are not suitable for replacement in circuits designed for the original 6A / 125V specification.

Compliance Considerations:

All recommended substitutes maintain ROHS3 compliance. The C&K 7101 series parts are REACH Affected; verify REACH compliance requirements for your specific application. All parts are classified as EAR99 for export control purposes.

Frequently Asked Questions (FAQ)

Q: Can the M2012SA1W01 be replaced with a 5A-rated switch?

A: Yes, provided the substitute maintains SPDT configuration, On-On function, panel mount design with 1/4-40 bushing thread, solder lug termination, and voltage rating of at least 120V AC / 28V DC. The 5A AC/DC rating is acceptable for most applications where the original 6A AC specification is not critical to system operation.

Q: What is the difference between the E-Switch 100SP1T1B6M1QEH and 100SP1T6B11M1QEH?

A: Both are E-Switch 100 series SPDT toggle switches with identical electrical ratings (5A AC/DC at 120V AC / 28V DC). The primary difference is actuator type: 100SP1T1B6M1QEH uses a Standard Round actuator (10.41mm length), while 100SP1T6B11M1QEH uses a Flat Anti-Rotation actuator (12.30mm length). Select based on panel mounting requirements and actuator preference.

Q: Are the C&K 7101P3H3ZGE2, 7101P3H3ZGE22, and 7101P3H3ZGES interchangeable?

A: These three C&K parts are electrically and mechanically identical with 5A AC/DC rating at 120V AC / 28V DC, identical dimensions, and 100,000-cycle electrical life. The differences are cosmetic: ZGE2 and ZGE22 feature black actuators, while ZGES features a satin chrome actuator. They are functionally interchangeable.

Q: What panel cutout diameter is required for substitutes?

A: The original M2012SA1W01 requires a 6.50mm circular cutout. Most substitute parts use 6.35mm cutout diameter. Verify panel opening dimensions before installation. A 6.50mm opening will accommodate a 6.35mm bushing with slight clearance.

Q: Can I use the 100SP1T6B11M1REH or 7101P3H3ZBE as replacements?

A: These parts are suitable only for low-power signal switching applications requiring 0.4VA at 20V AC/DC. They are not suitable for replacement in circuits designed for the original 6A / 125V specification. Use only if your application requirements have changed to low-voltage, low-current operation.

Q: What is the electrical life difference between the original and substitutes?

A: The M2012SA1W01 is rated for 25,000 cycles. Most active substitute parts offer 40,000 to 100,000 cycles, providing extended operational life. The C&K 7101 series offers the highest cycle rating at 100,000 cycles.

Q: Are all substitutes ROHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant. The C&K 7101 series parts are REACH Affected; verify REACH compliance status for your specific regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message