LZP-L0MD00-0000 LED Module Equivalent & Substitute Parts

Part Overview

The LZP-L0MD00-0000 is a LuxiGen™ LED Module manufactured by ams-OSRAM USA INC., configured as a Starboard with integrated Red, Green, Blue, and White (RGBW) color channels operating at 6335K color temperature. This module is classified as Obsolete, making identification of active equivalent parts essential for ongoing production and maintenance applications. The module delivers 770lm Red, 925lm Green, 221lm Blue, and 1605lm White at 700mA test current with a 125° viewing angle and domed lens configuration.

Substiute Parts

LZP-L0MD00-0000

ams-OSRAM USA INC.In Stock: 1150LZP-L0MD00-0000 Datasheet

Current PartRFQ

LZP-L0MD00-0000_G2

ams-OSRAM USA INC.In Stock: 1007LZP-L0MD00-0000_G2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete LZP-L0MD00-0000 is determined by the following critical parameters:

Mechanical Compatibility:

• Identical diameter (27.60mm) and Light Emitting Surface (10.50mm Dia)
• Domed lens type maintained
• Starboard configuration preserved

Electrical Compatibility:

• RGBW color channel configuration
• 700mA test current rating across all channels
• 1A maximum current rating per channel
• Forward voltage characteristics within acceptable operating range

Regulatory & Environmental:

• RoHS3 compliance maintained
• MSL 1 classification preserved
• REACH Unaffected status maintained
• ECCN EAR99 classification consistent

The substitute part LZP-L0MD00-0000_G2 maintains these core parameters while transitioning from Obsolete to Active product status.

Parameter Comparison

Engineering Selection Recommendations

The LZP-L0MD00-0000_G2 is the manufacturer-recommended substitute for the obsolete LZP-L0MD00-0000. Selection is based on the following engineering criteria:

Product Status Transition: The substitute transitions from Obsolete to Active status, ensuring continued availability and manufacturing support from ams-OSRAM USA INC.

Regulatory Compliance: Both parts maintain identical ECCN (EAR99) and HTSUS (8541.41.0000) classifications, ensuring consistent export and trade compliance. RoHS3 compliance and REACH Unaffected status are preserved.

Mechanical Compatibility: Identical footprint (27.60mm diameter) and Light Emitting Surface (10.50mm diameter) with domed lens configuration enable direct mechanical substitution in existing Starboard-configured assemblies. Height difference (7.60mm vs. 10.10mm) must be evaluated for clearance in specific mechanical designs.

Electrical Compatibility: Both modules operate at 700mA test current across all RGBW channels with identical maximum current ratings. Luminous flux output differs in Green and Blue channels, reflecting performance improvements in the active substitute part.

Frequently Asked Questions (FAQ)

Q: Can LZP-L0MD00-0000_G2 be used as a direct replacement for LZP-L0MD00-0000?

A: Yes, for applications where the 2.50mm height increase (from 7.60mm to 10.10mm) does not create mechanical interference. Electrical and regulatory parameters are compatible. Verify clearance in your specific mechanical assembly before implementation.

Q: What is the significance of the height difference between the main part and substitute?

A: The substitute part is 2.50mm taller (10.10mm vs. 7.60mm). This dimension change must be evaluated against your mechanical design constraints, including PCB clearance, housing fit, and thermal management considerations.

Q: Are the luminous flux outputs identical between the two parts?

A: No. The substitute part delivers higher Green (1395lm vs. 925lm) and Blue (296lm vs. 221lm) luminous flux at 700mA test current, while Red and White outputs remain identical. Evaluate color balance requirements for your application.

Q: What regulatory certifications apply to both parts?

A: Both parts maintain RoHS3 compliance, REACH Unaffected status, MSL 1 classification, and identical ECCN (EAR99) and HTSUS (8541.41.0000) codes. No regulatory re-qualification is required for the substitution.

Q: Is the Starboard configuration identical between both parts?

A: Yes. Both parts maintain identical Starboard configuration with 27.60mm diameter and 10.50mm Light Emitting Surface diameter, ensuring compatibility with existing optical and thermal designs.

Q: What should be verified before implementing this substitution?

A: Verify mechanical clearance for the 2.50mm height increase, evaluate color balance impact from the luminous flux differences in Green and Blue channels, and confirm electrical driver compatibility with the substitute part's operating characteristics.