LP562M035E3P3 Equivalent & Substitute Parts Reference

Part Overview

The LP562M035E3P3 is a 5600 µF, 35 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is classified as Active product status and is designed for general-purpose applications requiring high capacitance values at moderate voltage ratings. The part operates across a temperature range of -40°C to 105°C with a rated lifetime of 1000 hours at 105°C and an equivalent series resistance (ESR) of 74 mOhm at 120 Hz.

Substitute parts are necessary when the original LP562M035E3P3 becomes unavailable due to inventory constraints, supply chain disruptions, or when design requirements necessitate alternative performance characteristics such as extended operational lifetime, improved ripple current handling, or different physical dimensions while maintaining core electrical specifications.

Substiute Parts

LP562M035E3P3

Cornell Dubilier Electronics (CDE)In Stock: 976LP562M035E3P3 Datasheet

Current PartRFQ

381LX562M035H032

Cornell Dubilier Electronics (CDE)In Stock: 4179381LX562M035H032 Datasheet

SimilarRFQ

381LX562M035K012

Cornell Dubilier Electronics (CDE)In Stock: 1838381LX562M035K012 Datasheet

SimilarRFQ

SLP562M035A5P3

Cornell Dubilier Electronics (CDE)In Stock: 1267SLP562M035A5P3 Datasheet

SimilarRFQ

LGU1V562MELB

NichiconIn Stock: 780LGU1V562MELB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LP562M035E3P3 is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• Capacitance: 5600 µF (exact match required)
• Voltage Rating: 35 V (substitute must equal or exceed)
• Tolerance: ±20% (exact match required)
• Operating Temperature Range: -40°C to 105°C (substitute must cover or exceed this range)
• Polarization: Polar (exact match required)
• Package Type: Radial, Can - Snap-In (exact match required for mechanical fit)
• Mounting Type: Through Hole (exact match required)
• Lead Spacing: 0.394" (10.00 mm) (exact match required for PCB hole alignment)

Secondary Compatibility Parameters:

• Lifetime at 105°C: Substitute may equal or exceed the original 1000 hours specification
• ESR and Ripple Current: Substitute values may differ; lower ESR and higher ripple current capability represent improved performance
• RoHS and REACH Compliance: All substitute parts must maintain ROHS3 compliance and REACH Unaffected status

All four substitute parts listed (381LX562M035H032, 381LX562M035K012, SLP562M035A5P3, and LGU1V562MELB) satisfy these mandatory parameters and are therefore electrically and mechanically compatible with the LP562M035E3P3.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain Active product status and full compliance with ROHS3 and REACH regulations, ensuring regulatory compatibility with the original LP562M035E3P3.

381LX562M035H032 (CDE): This substitute offers extended lifetime (3000 hours at 105°C versus 1000 hours) and improved ripple current capability (2.8 A at 120 Hz). Physical dimensions differ: smaller diameter (0.866" versus 1.181") but greater height (1.457" versus 1.181"). Verify available vertical clearance in the application before selection.

381LX562M035K012 (CDE): This substitute provides the same extended lifetime (3000 hours at 105°C) and improved ripple current (2.8 A at 120 Hz) as the H032 variant. Physical dimensions match the original diameter (1.181") but with reduced height (1.063" versus 1.181"), offering a more compact profile. This part is recommended when vertical space is constrained.

SLP562M035A5P3 (CDE): This substitute delivers extended lifetime (3000 hours at 105°C) with slightly higher ESR (95 mOhm versus 74 mOhm) and moderate ripple current (2.4 A at 120 Hz). Physical dimensions are compact: smaller diameter (0.866") and greater height (1.378"). Verify available space in both horizontal and vertical directions.

LGU1V562MELB (Nichicon): This substitute from an alternative manufacturer (Nichicon) provides extended lifetime (3000 hours at 105°C) with ripple current performance (2.12 A at 120 Hz) comparable to the original. Physical dimensions match the original diameter (1.181") with reduced height (1.063"). This part is suitable for cross-manufacturer substitution while maintaining dimensional compatibility.

Frequently Asked Questions (FAQ)

Q: Can I substitute the LP562M035E3P3 with any of these four parts without circuit redesign?

A: All four substitute parts are electrically compatible due to matching capacitance (5600 µF), voltage rating (35 V), tolerance (±20%), operating temperature range (-40°C to 105°C), and polarization. However, physical dimensions vary. Verify that the selected substitute fits within available PCB space, particularly height clearance. The 381LX562M035K012 and LGU1V562MELB offer the most compact height (1.063") if space is limited.

Q: What is the advantage of selecting a substitute with 3000-hour lifetime instead of the original 1000-hour specification?

A: Extended lifetime (3000 hours at 105°C) indicates improved long-term reliability and reduced degradation over extended operation at elevated temperatures. This is a performance enhancement, not a requirement for substitution. Select based on application service life requirements.

Q: Does the difference in ESR (74 mOhm versus 95 mOhm) affect circuit performance?

A: ESR affects ripple current handling and heat dissipation. The original LP562M035E3P3 has lower ESR (74 mOhm), which is generally preferable for high-ripple-current applications. The SLP562M035A5P3 substitute has slightly higher ESR (95 mOhm). Verify that ripple current requirements are met by the selected substitute.

Q: Are there any compliance or regulatory differences between CDE and Nichicon substitutes?

A: No. Both the CDE substitutes (381LX562M035H032, 381LX562M035K012, SLP562M035A5P3) and the Nichicon substitute (LGU1V562MELB) are ROHS3 compliant and REACH Unaffected. All parts maintain equivalent regulatory status.

Q: Which substitute should I select if PCB space is severely constrained?

A: The 381LX562M035K012 and LGU1V562MELB both offer the most compact height (1.063" or 27.00 mm) while maintaining the original diameter (1.181" or 30.00 mm). Both are suitable for space-constrained applications.

Q: Can I use the 381LX562M035H032 if my PCB has limited vertical clearance?

A: No. The 381LX562M035H032 has the greatest height (1.457" or 37.00 mm), which exceeds the original part height (1.181" or 30.00 mm) by 0.276 inches. Verify adequate vertical clearance before selection.

Q: What is the difference between the two CDE 381LX series substitutes?

A: Both 381LX562M035H032 and 381LX562M035K012 offer identical electrical performance (5600 µF, 35 V, 3000-hour lifetime, 2.8 A ripple current). The primary difference is physical dimensions: the H032 has a smaller diameter (0.866") but greater height (1.457"), while the K012 matches the original diameter (1.181") with reduced height (1.063"). Select based on available PCB space.

Q: Is the Nichicon LGU1V562MELB a direct replacement for the LP562M035E3P3?

A: The LGU1V562MELB is electrically and mechanically compatible. It matches the original diameter (1.181") and offers reduced height (1.063"). The primary difference is manufacturer (Nichicon versus CDE). Both are Active products with equivalent compliance certifications.