LNT2C333MSEN Equivalent & Substitute Parts

Part Overview

The LNT2C333MSEN is a 33000 µF, 160 V aluminum electrolytic capacitor manufactured by Nichicon in the LNT series. This radial, can-style component features screw terminals for chassis mount applications and is rated for 2000 hours at 105°C. The part is currently active in production with full RoHS3 compliance and REACH compliance status. Equivalent substitute parts are identified when identical electrical specifications, mechanical dimensions, and mounting characteristics are maintained across the product line.

Substiute Parts

LNT2C333MSEN

NichiconIn Stock: 887LNT2C333MSEN Datasheet

Current PartRFQ

LNT2C333MSE

NichiconIn Stock: 1080LNT2C333MSE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the LNT2C333MSEN is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part LNT2C333MSE maintains identical specifications in the following key areas:

• Capacitance value: 33000 µF
• Voltage rating: 160 V
• Tolerance: ±20%
• Thermal rating: 2000 Hrs @ 105°C
• Operating temperature range: -25°C ~ 105°C
• Ripple current specifications at both 120 Hz and 10 kHz
• Physical dimensions: case diameter, height, and lead spacing
• Package configuration: Radial, Can - Screw Terminals
• Mounting method: Chassis Mount
• Compliance certifications: RoHS3 and REACH

Both parts belong to the Nichicon LNT series and share identical product status (Active). No parameter deviation is permitted for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

Both LNT2C333MSEN and LNT2C333MSE are active production parts from Nichicon with full RoHS3 compliance and REACH compliance status. Selection between these parts is based on availability and inventory status. The LNT2C333MSE currently maintains higher inventory levels (992 pcs) compared to LNT2C333MSEN (835 pcs), making it a viable alternative when supply constraints exist. Both parts meet identical electrical performance requirements, thermal specifications, and mechanical fit requirements for chassis mount applications requiring 33000 µF capacitance at 160 V.

Frequently Asked Questions (FAQ)

Q: Can LNT2C333MSE be used as a direct replacement for LNT2C333MSEN?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including capacitance, voltage rating, tolerance, thermal rating, ripple current, physical dimensions, and mounting configuration. No circuit modifications or board layout changes are required.

Q: Are there differences in lead spacing or mounting footprint?

A: No. Both parts share identical lead spacing (1.252" / 31.80 mm), case diameter (4.643" / 90.00 mm), and height (5.630" / 143.00 mm). Screw terminal configurations are identical for chassis mount applications.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both LNT2C333MSEN and LNT2C333MSE are RoHS3 compliant and REACH affected, meeting identical regulatory standards.

Q: What is the basis for substitution between these parts?

A: Substitution is based on complete equivalence across capacitance (33000 µF), voltage rating (160 V), tolerance (±20%), thermal rating (2000 Hrs @ 105°C), ripple current specifications, physical dimensions, package type (Radial, Can - Screw Terminals), and mounting method (Chassis Mount).

Q: Are there any performance differences in ripple current handling?

A: No. Both parts are rated for identical ripple current at low frequency (13.4 A @ 120 Hz) and high frequency (16.08 A @ 10 kHz).