LCMB10-10-L Ring Terminal Connector M10 Equivalent & Substitute Parts

Part Overview

The LCMB10-10-L is a ring terminal connector manufactured by Panduit Corp, designed for M10 stud applications with 10mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp termination. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCMB10-10-L

Panduit CorpIn Stock: 1205LCMB10-10-L Datasheet

Current PartRFQ

LCMA10-10-C

Panduit CorpIn Stock: 787LCMA10-10-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCMB10-10-L is determined by strict equivalence across the following critical parameters:

• Stud/Tab Size: M10 Stud (mechanical interface requirement)
• Wire Gauge: 10mm² (electrical capacity requirement)
• Terminal Type: Flat Sided, Tubular (Battery Lugs) (form factor requirement)
• Termination Method: Crimp (assembly process requirement)
• Contact Material: Copper (electrical conductivity requirement)
• Contact Finish: Tin (corrosion resistance requirement)
• Insulation: Non-Insulated (application requirement)

The LCMA10-10-C meets all critical substitution criteria. Both parts share identical stud size, wire gauge capacity, terminal geometry, termination method, and material specifications. The primary difference is overall length, which does not affect electrical or mechanical compatibility for the M10 stud interface.

Parameter Comparison

Engineering Selection Recommendations

The LCMA10-10-C is a direct functional equivalent to the LCMB10-10-L for applications requiring M10 stud ring terminals with 10mm² wire capacity. Selection of the LCMA10-10-C is supported by the following factors:

• Product Status: The LCMA10-10-L is classified as active, ensuring ongoing availability and supply chain support, whereas the LCMB10-10-L is obsolete.
• Regulatory Compliance: Both parts maintain identical ROHS3 compliance, REACH unaffected status, and EAR99 export classification, confirming equivalent regulatory standing.
• Electrical and Mechanical Specifications: All critical parameters determining electrical performance and mechanical interface compatibility are identical between the two parts.
• Material and Finish Specifications: Copper contact material with tin finish is maintained, ensuring equivalent corrosion resistance and electrical conductivity.

The length differential (43.79mm versus 30.80mm) does not affect compatibility with M10 stud interfaces or crimp termination processes.

Frequently Asked Questions (FAQ)

Q: Can the LCMA10-10-C be used as a direct replacement for the LCMB10-10-L?

A: Yes. Both parts share identical stud size (M10), wire gauge (10mm²), terminal geometry (flat-sided tubular), contact material (copper), contact finish (tin), and termination method (crimp). The LCMA10-10-C is functionally equivalent for all M10 stud applications.

Q: What is the significance of the length difference between these parts?

A: The LCMB10-10-L has an overall length of 43.79mm, while the LCMA10-10-C measures 30.80mm. This dimensional difference does not affect electrical performance or mechanical compatibility with M10 studs. Length variation is a design characteristic within the same terminal family and does not impact substitution suitability.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance, REACH unaffected status, and EAR99 export classification. Regulatory standing is equivalent.

Q: Why is the LCMB10-10-L listed as obsolete?

A: Product obsolescence is determined by manufacturer lifecycle decisions. The LCMA10-10-C, classified as active, represents the current production equivalent within the Panduit terminal product line.

Q: What packaging differences exist between these parts?

A: The LCMB10-10-L is supplied in standard packaging, while the LCMA10-10-C is supplied in bulk packaging. Both formats contain the same terminal specification and are suitable for production assembly processes.

Q: Are the crimp termination specifications identical?

A: Yes. Both parts utilize crimp termination for 10mm² wire gauge. Crimp tool specifications and wire preparation requirements are equivalent.