LCCF2/0-38DF-X Equivalent & Substitute Parts

Part Overview

The LCCF2/0-38DF-X is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 2/0 AWG wire applications with a 3/8 stud configuration. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and support ongoing maintenance and repair operations. The terminal features crimp barrel termination, electro-tin contact finish, and copper contact material suitable for high-current electrical connections.

Substiute Parts

LCCF2/0-38DF-X

Panduit CorpIn Stock: 856LCCF2/0-38DF-X Datasheet

Current PartRFQ

LCCX2/0-38DF-X

Panduit CorpIn Stock: 1017LCCX2/0-38DF-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCCF2/0-38DF-X is determined by strict equivalence across the following critical parameters:

Wire Gauge Compatibility: Both the main part and substitute must accommodate 2/0 AWG wire termination.

Stud Configuration: The 3/8 stud size must be maintained to ensure proper mechanical fit within the assembly.

Terminal Geometry: Rectangular tongue configuration with two stud holes must be preserved for mounting compatibility.

Electrical Specifications: Crimp barrel termination method, copper contact material, and electro-tin finish ensure consistent electrical performance and corrosion resistance.

Mechanical Dimensions: Ring ID of 0.410" (10.41mm) and tab thickness of 0.130" (3.30mm) are critical for proper stud engagement and load distribution.

Regulatory Compliance: ROHS3 compliance and REACH unaffected status must be maintained across all substitutes.

The LCCX2/0-38DF-X meets all these criteria and qualifies as a direct functional equivalent despite differences in product status, packaging, color, and barrel outer diameter.

Parameter Comparison

Engineering Selection Recommendations

The LCCX2/0-38DF-X is the qualified substitute for the obsolete LCCF2/0-38DF-X. Selection of the LCCX2/0-38DF-X is based on the following engineering criteria:

Functional Equivalence: All critical electrical and mechanical parameters are identical, including wire gauge, stud size, terminal geometry, and contact specifications. The terminals are functionally interchangeable within the same application circuit.

Active Product Status: The LCCX2/0-38DF-X maintains active product status with Panduit Corp, ensuring continued availability and supply chain support. The LCCF2/0-38DF-X is obsolete and subject to discontinuation.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying current environmental and regulatory requirements.

Dimensional Compatibility: Mechanical dimensions critical to assembly fit and electrical performance are preserved. The minor reduction in barrel outer diameter (0.640" versus 0.730") does not affect functional performance or stud engagement.

Certification Alignment: Both parts share identical ECCN and HTSUS classifications, maintaining consistency with export and trade compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the LCCX2/0-38DF-X be used as a direct replacement for the LCCF2/0-38DF-X?

A: Yes. The LCCX2/0-38DF-X is a direct functional equivalent. All critical parameters including wire gauge, stud size, terminal type, and electrical specifications are identical. The parts are mechanically and electrically interchangeable.

Q: What is the difference between the LCCF and LCCX part numbers?

A: The LCCF2/0-38DF-X is an obsolete variant, while the LCCX2/0-38DF-X is the active equivalent. The primary differences are product status, color (orange versus black), and barrel outer diameter (0.730" versus 0.640"). These differences do not affect functional performance.

Q: Does the color difference between orange and black affect performance?

A: No. Color is a cosmetic designation and does not impact electrical or mechanical performance. Both parts use identical copper contact material with electro-tin finish.

Q: Is the smaller barrel outer diameter of the LCCX2/0-38DF-X a concern?

A: No. The barrel inner diameter (0.510") and ring ID (0.410") are identical in both parts. The reduction in outer diameter does not affect wire termination quality, stud engagement, or electrical performance.

Q: What packaging options are available for the LCCX2/0-38DF-X?

A: The LCCX2/0-38DF-X is supplied in bulk packaging. Specific packaging quantities should be confirmed with the supplier based on application requirements.

Q: Are both parts compliant with current environmental regulations?

A: Yes. Both the LCCF2/0-38DF-X and LCCX2/0-38DF-X are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: Can these terminals be used with wire gauges other than 2/0 AWG?

A: No. Both terminals are specifically designed for 2/0 AWG wire. Use only with the specified wire gauge to ensure proper termination and electrical performance.

Q: What is the crimp barrel termination method?

A: Crimp barrel termination involves compressing the barrel around the stripped wire conductor using a crimping tool. This method creates a permanent mechanical and electrical connection suitable for high-current applications.