LB2016T100K Equivalent & Substitute Parts

Part Overview

The LB2016T100K is a 10 µH unshielded wirewound surface mount inductor manufactured by Taiyo Yuden, rated for 155 mA continuous current with 500mOhm DC resistance in a 0806 (2016 Metric) package. This component is classified as "Not For New Designs," indicating it has been superseded in the manufacturer's product line. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support existing production requirements for applications utilizing this inductor specification.

Substiute Parts

LB2016T100K

Taiyo YudenIn Stock: 16813LB2016T100K Datasheet

Current PartRFQ

LSQBA201616T100K

Taiyo YudenIn Stock: 937LSQBA201616T100K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LB2016T100K is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Inductance value: 10 µH
• Inductance tolerance: ±10%
• Current rating: 155 mA minimum
• DC resistance: 500mOhm

Mechanical Parameters:

• Package: 0806 (2016 Metric)
• Mounting type: Surface Mount
• Shielding configuration: Unshielded

Environmental & Compliance Parameters:

• Operating temperature range: -40°C to 105°C
• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)

The substitute part LSQBA201616T100K meets all specified electrical, mechanical, and environmental criteria. Substitution is valid when all parameters listed above are matched or exceeded in the replacement component.

Parameter Comparison

Engineering Selection Recommendations

The LSQBA201616T100K is a direct functional equivalent to the LB2016T100K. Both components are manufactured by Taiyo Yuden and share identical electrical specifications, mechanical dimensions, and environmental operating parameters. The LSQBA201616T100K carries an "Active" product status, indicating ongoing manufacturer support and availability, whereas the LB2016T100K is designated "Not For New Designs."

For applications currently using the LB2016T100K, the LSQBA201616T100K provides a compatible replacement without circuit redesign. Both components maintain ROHS3 compliance and identical moisture sensitivity ratings, ensuring compatibility with existing manufacturing and assembly processes. The substitute part is suitable for direct board-level replacement in existing designs and for new production runs requiring this inductor specification.

Frequently Asked Questions (FAQ)

Q: Can the LSQBA201616T100K be used as a direct replacement for the LB2016T100K?

A: Yes. The LSQBA201616T100K is electrically and mechanically equivalent to the LB2016T100K. Both components have identical inductance (10 µH), current rating (155 mA), DC resistance (500mOhm), package dimensions (0806/2016 Metric), and operating temperature range (-40°C to 105°C). No circuit modifications are required.

Q: Are there any differences in core material between these parts?

A: The LB2016T100K core material is not specified in the provided data. The LSQBA201616T100K uses a ferrite core. Both components deliver identical electrical performance at the specified test frequency (2.52 MHz) and self-resonant frequency (32 MHz).

Q: What is the significance of the product status difference?

A: The LB2016T100K is marked "Not For New Designs," indicating the manufacturer has discontinued active development and recommends using alternative parts for new applications. The LSQBA201616T100K carries "Active" status, confirming ongoing manufacturer support, production, and availability. For new designs and ongoing production, the LSQBA201616T100K is the recommended choice.

Q: Are both parts RoHS compliant?

A: Yes. Both the LB2016T100K and LSQBA201616T100K are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and assembly.

Q: Can these inductors be used interchangeably in PCB assembly?

A: Yes. Both components use identical Surface Mount packaging (0806/2016 Metric) with matching footprints, pad layouts, and height specifications (0.071" maximum seated height). They are interchangeable at the PCB assembly level without requiring footprint or placement modifications.

Q: What is the moisture sensitivity rating for these parts?

A: Both components have a Moisture Sensitivity Level (MSL) of 1, which indicates unlimited shelf life and no special moisture control requirements during storage, handling, or assembly.