Equivalent & Substitute Parts for L0103MEAP TRIAC Sensitive Gate 600V 1A TO-92

Part Overview

The L0103MEAP is a logic-sensitive gate TRIAC manufactured by Littelfuse Inc., rated for 600 V off-state voltage and 1 A on-state current in a through-hole TO-92 package. This component is active and in production, with 683 pieces currently in stock. Substitute parts are identified when equivalent electrical parameters and mechanical compatibility allow direct replacement in circuit applications, particularly when primary inventory is unavailable or when alternative packaging formats are required.

Key Parameters

Parameter	Value
Voltage - Off State	600 V
Current - On State (It (RMS)) (Max)	1 A
Voltage - Gate Trigger (Vgt) (Max)	1.3 V
Current - Gate Trigger (Igt) (Max)	3 mA
Current - Hold (Ih) (Max)	7 mA
Operating Temperature Range	-40°C ~ 125°C (TJ)
Package / Case	TO-226-3, TO-92-3 (TO-226AA) Formed Leads
Mounting Type	Through Hole
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of TRIAC components is determined by the following critical parameters:

Voltage Rating (Off State): Must equal or exceed 600 V
Current Rating (On State): Must equal or exceed 1 A
Gate Trigger Voltage (Vgt): Must not exceed 1.3 V
Gate Trigger Current (Igt): Must not exceed 3 mA for direct substitution
Hold Current (Ih): Must not exceed 7 mA for direct substitution
Operating Temperature Range: Must support -40°C ~ 125°C minimum
Package Compatibility: TO-92 or TO-92-3 through-hole configuration

Parts are grouped into two categories:

Manufacturer Recommended Substitutes: STMicroelectronics Z-series TRIACs meeting all electrical parameters and package requirements.

Parametric Equivalents: Parts with identical electrical specifications but potentially different packaging or inventory status.

Parameter Comparison

Part Number	Manufacturer	Voltage (V)	Current (A)	Vgt (V)	Igt (mA)	Ih (mA)	Temp Range (°C)	Package	Inventory (Pcs)
L0103MEAP	Littelfuse Inc.	600	1	1.3	3	7	-40 ~ 125	TO-92	683
Z00607MA 2BL2	STMicroelectronics	600	0.8	1.3	5	5	-40 ~ 110	TO-92	3923
Z00607MA 5BL2	STMicroelectronics	600	0.8	1.3	5	5	-40 ~ 110	TO-92-3	4993
Z0103MA 1AA2	STMicroelectronics	600	1	1.3	3	7	-40 ~ 125	TO-92-3	90400
Z0103MA 5AL2	STMicroelectronics	600	1	1.3	3	7	-40 ~ 125	TO-92-3	8200
Z0103MA 2AL2	STMicroelectronics	600	1	1.3	3	7	-40 ~ 125	TO-92-3	4828
Z0107MA 1AA2	STMicroelectronics	600	1	1.3	5	10	-40 ~ 125	TO-92-3	6200
Z0107MA 5AL2	STMicroelectronics	600	1	1.3	5	10	-40 ~ 125	TO-92-3	2300
Z0109MA 1AA2	STMicroelectronics	600	1	1.3	10	10	-40 ~ 125	TO-92-3	90100
Z0109MA 2AL2	STMicroelectronics	600	1	1.3	10	10	-40 ~ 125	TO-92	19200
Z0109MA 5AL2	STMicroelectronics	600	1	1.3	10	10	-40 ~ 125	TO-92	3165

Engineering Selection Recommendations

Direct Electrical Equivalents (Identical Specifications)

Z0103MA 1AA2, Z0103MA 5AL2, and Z0103MA 2AL2 are direct electrical equivalents to the L0103MEAP, matching all critical parameters: 600 V off-state voltage, 1 A on-state current, 1.3 V gate trigger voltage, 3 mA gate trigger current, and 7 mA hold current. All three variants support the full -40°C ~ 125°C operating temperature range and are ROHS3 compliant. These parts differ only in packaging format (Bulk, Cut Tape, or Cut Tape variants) and inventory availability. Z0103MA 1AA2 offers the highest inventory level at 90,400 pieces.

Relaxed Gate Trigger Parameters

Z0107MA 1AA2 and Z0107MA 5AL2 maintain identical voltage and current ratings but feature higher gate trigger current (5 mA) and hold current (10 mA) specifications. These parts are suitable for applications where slightly higher gate drive requirements are acceptable. Both support the full -40°C ~ 125°C temperature range and are ROHS3 compliant.

Z0109MA 1AA2, Z0109MA 2AL2, and Z0109MA 5AL2 further relax gate trigger specifications to 10 mA and hold current to 10 mA. These parts are applicable in circuits designed to accommodate higher gate drive margins. Z0109MA 2AL2 and Z0109MA 5AL2 are available in TO-92 package format matching the original part's supplier device package, with Z0109MA 2AL2 providing 19,200 pieces in inventory.

Current-Reduced Alternatives

Z00607MA 2BL2 and Z00607MA 5BL2 are rated for 0.8 A on-state current, below the 1 A requirement of the L0103MEAP. These parts are suitable only for applications where the circuit load current does not exceed 0.8 A. Both maintain 600 V voltage rating and 1.3 V gate trigger voltage but operate at reduced maximum temperature (-40°C ~ 110°C). These parts are not recommended as direct substitutes for the L0103MEAP in circuits requiring full 1 A capacity.

All substitute parts listed are active products with ROHS3 compliance and REACH unaffected status, matching the regulatory compliance of the original component.

Frequently Asked Questions (FAQ)

Q: Can Z0103MA series parts directly replace the L0103MEAP?

A: Yes. Z0103MA 1AA2, Z0103MA 5AL2, and Z0103MA 2AL2 are direct electrical equivalents with identical voltage, current, and gate trigger specifications. The primary differences are packaging format (Bulk versus Cut Tape) and inventory status. All three support the same -40°C ~ 125°C operating temperature range.

Q: What is the difference between TO-92 and TO-92-3 packages?

A: Both are through-hole configurations with identical lead spacing and pin assignments. TO-92-3 explicitly denotes a three-lead package with formed leads. The L0103MEAP is supplied in TO-92 format, while most substitute parts are available in TO-92-3. These packages are mechanically and electrically interchangeable in through-hole PCB applications.

Q: Can I use Z00607MA parts as substitutes?

A: Z00607MA 2BL2 and Z00607MA 5BL2 are rated for 0.8 A maximum on-state current, compared to the L0103MEAP's 1 A rating. These parts are suitable only for applications where circuit load current does not exceed 0.8 A. For circuits requiring the full 1 A capacity, these parts are not recommended.

Q: What is the significance of gate trigger current (Igt) differences?

A: Gate trigger current determines the minimum current required to switch the TRIAC on. The L0103MEAP requires 3 mA maximum. Z0107MA and Z0109MA series parts require 5 mA and 10 mA respectively. Higher gate trigger current requirements necessitate stronger gate drive circuits. Parts with higher Igt specifications are suitable only in applications designed to provide adequate gate drive margin.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, matching the regulatory status of the L0103MEAP.

Q: Which substitute offers the best inventory availability?

A: Z0103MA 1AA2 provides the highest inventory level at 90,400 pieces, followed by Z0109MA 1AA2 at 90,100 pieces. Both are direct or functionally equivalent alternatives with full parameter compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message