Equivalent & Substitute Parts for KTR10EZPJ113

Part Overview

The KTR10EZPJ113 is an 11 kOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Rohm Semiconductor. This component is rated for automotive applications under AEC-Q200 standard with high voltage capability and operates across -55°C to 155°C. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and automotive qualification requirements.

Substiute Parts

KTR10EZPJ113

Rohm SemiconductorIn Stock: 830KTR10EZPJ113 Datasheet

Current PartRFQ

KTR10EZPF1102

Rohm SemiconductorIn Stock: 1941KTR10EZPF1102 Datasheet

UpgradeRFQ

ERJ-6GEYJ113V

Panasonic Electronic ComponentsIn Stock: 33492ERJ-6GEYJ113V Datasheet

DirectRFQ

CRCW080511K0JNEA

Vishay DaleIn Stock: 63468CRCW080511K0JNEA Datasheet

UpgradeRFQ

CRG0805F11K

TE Connectivity Passive ProductIn Stock: 313333CRG0805F11K Datasheet

UpgradeRFQ

ERJ-6ENF1102V

Panasonic Electronic ComponentsIn Stock: 87940ERJ-6ENF1102V Datasheet

UpgradeRFQ

RC0805FR-0711KL

YAGEOIn Stock: 72898RC0805FR-0711KL Datasheet

UpgradeRFQ

RC0805JR-0711KL

YAGEOIn Stock: 43521RC0805JR-0711KL Datasheet

UpgradeRFQ

RMCF0805FG11K0

Stackpole Electronics IncIn Stock: 10947RMCF0805FG11K0 Datasheet

UpgradeRFQ

RMCF0805JT11K0

Stackpole Electronics IncIn Stock: 15667RMCF0805JT11K0 Datasheet

UpgradeRFQ

CR0805-JW-113ELF

Bourns Inc.In Stock: 25872CR0805-JW-113ELF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the KTR10EZPJ113 are grouped into three categories based on tolerance and automotive qualification alignment:

Direct Equivalents (±5% Tolerance, AEC-Q200): Parts matching all primary electrical and environmental specifications including automotive AEC-Q200 rating and ±5% tolerance. These provide one-to-one functional replacement without design modification.

Upgraded Tolerance Variants (±1% Tolerance): Parts with improved tolerance specification (±1% versus ±5%) while maintaining 11 kOhms resistance, 0.125W power rating, 0805 package, and operating temperature range. These offer enhanced precision and lower temperature coefficient (±100ppm/°C versus ±200ppm/°C) where circuit design permits tolerance tightening.

Similar Alternatives (±5% Tolerance, Non-AEC or Partial AEC): Parts with matching electrical specifications and package but without full automotive AEC-Q200 qualification or with moisture-resistant features as primary differentiator.

Substitution eligibility is determined by: resistance value, tolerance class, power rating, package dimensions, operating temperature range, and automotive qualification status where required by application.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Automotive AEC-Q200 Required):

Select from ERJ-6GEYJ113V (Panasonic), CRCW080511K0JNEA (Vishay Dale), or RMCF0805JT11K0 (Stackpole Electronics Inc) when AEC-Q200 automotive qualification is mandatory. All three maintain ±5% tolerance, 0.125W power rating, 0805 package, and -55°C to 155°C operating range. Height variations (0.50mm to 0.70mm) are within typical PCB assembly tolerances for 0805 components.

For Tolerance Upgrade (Automotive AEC-Q200 Required):

Select KTR10EZPF1102 (Rohm Semiconductor), ERJ-6ENF1102V (Panasonic), or RMCF0805FG11K0 (Stackpole Electronics Inc) when circuit design permits ±1% tolerance specification. These parts reduce tolerance to ±1% and lower temperature coefficient to ±100ppm/°C while maintaining AEC-Q200 qualification and identical package/power specifications.

For Non-Automotive Applications:

RC0805JR-0711KL (YAGEO) or CR0805-JW-113ELF (Bourns Inc.) are suitable when AEC-Q200 qualification is not required. Both maintain ±5% tolerance and 0.125W rating in 0805 package with moisture-resistant composition.

All substitute parts listed are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity) matching the original specification.

Frequently Asked Questions (FAQ)

Q: Can I substitute KTR10EZPJ113 with a ±1% tolerance part?

A: Yes, if circuit design permits. KTR10EZPF1102, ERJ-6ENF1102V, or RMCF0805FG11K0 provide ±1% tolerance with lower temperature coefficient (±100ppm/°C). All maintain 11 kOhms resistance, 0.125W power, 0805 package, and automotive AEC-Q200 rating where applicable.

Q: What is the impact of different package heights on PCB assembly?

A: Substitute parts range from 0.50mm to 0.70mm seated height. These variations fall within standard 0805 component height tolerances and do not affect PCB assembly processes or reflow profiles. Height differences are accommodated by standard pick-and-place equipment calibration.

Q: Is AEC-Q200 qualification required for my application?

A: AEC-Q200 is mandatory for automotive and safety-critical applications. For non-automotive use, parts without AEC-Q200 rating (RC0805JR-0711KL, CR0805-JW-113ELF, CRG0805F11K, RC0805FR-0711KL) are acceptable if other electrical parameters match design requirements.

Q: Can I use a moisture-resistant variant instead of the original part?

A: Yes. RC0805JR-0711KL, RC0805FR-0711KL, and CR0805-JW-113ELF feature moisture-resistant composition. These are direct functional equivalents with identical electrical specifications and are suitable for applications requiring enhanced moisture protection.

Q: What tolerance should I specify for new designs?

A: Specify ±1% tolerance (KTR10EZPF1102, ERJ-6ENF1102V, RMCF0805FG11K0) for precision circuits requiring tighter component tolerances. Specify ±5% tolerance for general-purpose applications where the original KTR10EZPJ113 specification is adequate.

Q: Are all substitute parts available in the same packaging format?

A: All listed parts are supplied in Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® formats suitable for automated assembly. Verify packaging format with supplier documentation for specific procurement requirements.