KEP10 Equivalent & Substitute Parts Reference

Part Overview

The KEP10 is a 0.6–10pF trimmer capacitor rated for 125V operation with side adjustment and through-hole mounting. Manufactured by Knowles Voltronics, this component features an air dielectric, sealed construction, and operates across the temperature range of –65°C to 125°C. The KEP10 is classified as obsolete, making identification of compatible substitute parts essential for ongoing design support and procurement planning.

Substiute Parts

KEP10

Knowles VoltronicsIn Stock: 1106KEP10 Datasheet

Current PartRFQ

KP10

Knowles VoltronicsIn Stock: 676KP10 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the KEP10 is determined by strict equivalence across the following critical parameters:

• Capacitance range: 0.6–10pF
• Voltage rating: 125V
• Adjustment type: Side
• Dielectric material: Air
• Mounting type: Through Hole
• Physical dimensions: 0.230" diameter, 0.490" maximum seated height
• Operating temperature range: –65°C to 125°C
• Q factor: 5000 @ 100MHz
• Sealed construction

The KP10 meets all these criteria and is classified as an active product, providing a direct functional and mechanical equivalent for the obsolete KEP10.

Parameter Comparison

Engineering Selection Recommendations

The KP10 is the direct substitute for the KEP10. Both components are manufactured by Knowles Voltronics and share identical electrical and mechanical specifications. The KP10 is currently in active production status, whereas the KEP10 is obsolete. The KP10 carries ROHS3 compliance and REACH unaffected status, providing regulatory alignment for new designs and procurement cycles. Inventory availability of the KP10 (638 pcs) supports immediate component sourcing.

Frequently Asked Questions (FAQ)

Q: Can the KP10 be used as a direct replacement for the KEP10 in existing designs?

A: Yes. The KP10 is electrically and mechanically equivalent to the KEP10 across all specified parameters, including capacitance range, voltage rating, adjustment type, physical dimensions, and operating temperature range. No circuit modifications are required.

Q: What is the primary difference between the KEP10 and KP10?

A: The KEP10 is obsolete, while the KP10 is an active product from the same manufacturer. The KP10 includes ROHS3 compliance and REACH unaffected certification, making it suitable for current procurement and regulatory requirements.

Q: Are there any packaging differences between these parts?

A: The KEP10 is specified with dash packaging, while the KP10 is supplied in bulk packaging. Both use through-hole mounting and are mechanically identical.

Q: Does the KP10 maintain the same performance characteristics as the KEP10?

A: Yes. The KP10 maintains the same Q factor (5000 @ 100MHz), sealed construction, and operating temperature range (–65°C to 125°C) as the KEP10.

Q: Is the KP10 suitable for high-frequency applications?

A: Both the KEP10 and KP10 are specified with a Q factor of 5000 @ 100MHz, indicating suitability for RF and high-frequency trimmer applications within the stated voltage and capacitance parameters.