JMAP-12XM General Purpose Relay DPDT Equivalent & Substitute Parts

Part Overview

The JMAP-12XM is a general purpose relay manufactured by TE Connectivity Aerospace, Defense and Marine. This through-hole mounted DPDT (2 Form C) relay operates at 12VDC with a 1A contact rating and is designed for switching applications up to 115VAC or 28VDC. The part is currently active in production with 938 pieces in stock. Substitute parts are identified to provide alternative sourcing options for procurement, inventory management, or design flexibility while maintaining electrical and mechanical compatibility.

Substiute Parts

JMAP-12XM

TE Connectivity Aerospace, Defense and MarineIn Stock: 981JMAP-12XM Datasheet

Current PartRFQ

2-1617351-9

TE Connectivity Aerospace, Defense and MarineIn Stock: 9102-1617351-9 Datasheet

Parametric EquivalentRFQ

6-1617542-0

TE Connectivity Aerospace, Defense and MarineIn Stock: 9386-1617542-0 Datasheet

Parametric EquivalentRFQ

JMAC-12XP

TE Connectivity Aerospace, Defense and MarineIn Stock: 997JMAC-12XP Datasheet

Parametric EquivalentRFQ

JMAP-12XL

TE Connectivity Aerospace, Defense and MarineIn Stock: 966JMAP-12XL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JMAP-12XM are qualified based on identical electrical and mechanical parameters. All substitute parts maintain the following critical specifications:

• Coil voltage: 12VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 1 A
• Switching voltage: 115VAC, 28VDC - Max
• Coil current: 30.8 mA
• Coil type: Non Latching
• Mounting type: Through Hole
• Termination style: PC Pin
• Seal rating: Sealed - Hermetically
• Operating temperature: -65°C ~ 125°C
• Contact material: Silver Palladium (AgPd), Gold (Au)
• Coil resistance: 390 Ohms
• Must operate voltage: 7 VDC
• Must release voltage: 0.63 VDC
• Operate time: 2 ms
• Release time: 1.5 ms

All substitute parts are manufactured by TE Connectivity Aerospace, Defense and Marine and share the same relay type classification (General Purpose). Substitution is valid across all identified part numbers within this group.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products from TE Connectivity Aerospace, Defense and Marine with identical electrical and mechanical specifications to the JMAP-12XM. Selection among these parts may be based on the following factors:

RoHS Compliance: Part 6-1617542-0 is ROHS3 compliant, while JMAP-12XM, 2-1617351-9, JMAC-12XP, and JMAP-12XL are RoHS non-compliant. Applications requiring RoHS3 compliance should specify part number 6-1617542-0.

REACH Status: Parts JMAP-12XM, 6-1617542-0, JMAC-12XP, and JMAP-12XL are REACH Unaffected. Part 2-1617351-9 has Vendor Undefined REACH status.

Inventory Availability: Current stock levels are as follows: JMAC-12XP (973 pcs), JMAP-12XM (938 pcs), JMAP-12XL (920 pcs), 6-1617542-0 (855 pcs), and 2-1617351-9 (831 pcs).

Series Designation: JMAP-12XM and JMAP-12XL belong to the MA, CII series. Part 2-1617351-9 also belongs to MA, CII series. Part 6-1617542-0 belongs to MGA, CII series. Part JMAC-12XP belongs to MAC series.

All parts are suitable for direct substitution in applications requiring a 12VDC DPDT general purpose relay with 1A contact rating and hermetically sealed through-hole mounting.

Frequently Asked Questions (FAQ)

Q: Can JMAP-12XM be directly replaced with any of the listed substitute parts?

A: Yes. All substitute parts (2-1617351-9, 6-1617542-0, JMAC-12XP, and JMAP-12XL) maintain identical electrical and mechanical specifications including coil voltage, contact form, current rating, switching voltage, operating temperature range, and termination style. Direct substitution is valid from an electrical and mechanical standpoint.

Q: What is the difference between JMAP-12XM and JMAP-12XL?

A: Both parts are from the MA, CII series with identical electrical and mechanical parameters. The difference is in the part number designation (XM versus XL suffix). Both are active products with equivalent functionality.

Q: Which substitute part should be selected for RoHS3 compliant applications?

A: Part number 6-1617542-0 is ROHS3 compliant. All other substitute parts (JMAP-12XM, 2-1617351-9, JMAC-12XP, and JMAP-12XL) are RoHS non-compliant.

Q: Are there differences in series designation among the substitute parts?

A: Yes. JMAP-12XM, JMAP-12XL, and 2-1617351-9 belong to the MA, CII series. Part 6-1617542-0 belongs to the MGA, CII series. Part JMAC-12XP belongs to the MAC series. Despite series differences, all parts maintain identical electrical and mechanical specifications.

Q: What is the REACH compliance status of all substitute parts?

A: Parts JMAP-12XM, 6-1617542-0, JMAC-12XP, and JMAP-12XL are REACH Unaffected. Part 2-1617351-9 has Vendor Undefined REACH status.

Q: Can these relays be used in aerospace and defense applications?

A: These relays are manufactured by TE Connectivity Aerospace, Defense and Marine and are classified as general purpose relays. All parts carry ECCN EAR99 classification and HTSUS code 8536.41.0050. Application suitability depends on specific system requirements and qualification standards.

Q: What is the operating temperature range for all substitute parts?

A: All substitute parts operate across the temperature range of -65°C to 125°C, providing consistent thermal performance across the entire substitute group.

Q: Are the coil specifications identical across all substitute parts?

A: Yes. All substitute parts have identical coil specifications: 12VDC coil voltage, 30.8 mA coil current, 390 Ohms coil resistance, non-latching coil type, 7 VDC must operate voltage, and 0.63 VDC must release voltage.

Q: What is the contact switching capability of these relays?

A: All substitute parts support switching of 115VAC or 28VDC maximum at 1A contact rating with DPDT (2 Form C) contact form. Contact material is Silver Palladium (AgPd) and Gold (Au).