JCK6048S12 Equivalent & Substitute Parts Reference

Part Overview

The JCK6048S12 is an isolated DC-DC converter module produced by XP Power, designed for ITE (Commercial) applications. It features a single 12V output at up to 5A, with an input voltage range of 36V to 75V and a maximum power output of 60W. The product is currently active and available in tube packaging as an 8-DIP module for through-hole mounting. Identifying equivalent or substitute models is often necessary for supply chain continuity, lead time reduction, or dual-sourcing, ensuring that systems maintain validated electrical performance and regulatory compliance.

Substiute Parts

JCK6048S12

XP PowerIn Stock: 916JCK6048S12 Datasheet

Current PartRFQ

SKA60C-12

MEAN WELL USA Inc.In Stock: 946SKA60C-12 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JCK6048S12 are grouped strictly according to key matching electrical, mechanical, and compliance parameters. The following parameters are considered fundamental for equivalence in DC-DC converter module selection:

• Input voltage range (36V to 75V)
• Output voltage (12V)
• Output current (5A)
• Output power (60W)
• Isolation voltage
• Mounting type and package dimensions
• Compliance status (RoHS, MSL)
• Features (Remote On/Off, OCP, OVP, SCP)
• Application class (ITE/Commercial)

Only parts matching this complete set of parameters are listed as substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both JCK6048S12 and SKA60C-12 are active products and are ROHS3 compliant with an MSL rating of 1 (Unlimited). Both models are classified under ECCN EAR99. Inventory quantities are available for both parts, and both are packaged in an 8-DIP module suitable for through-hole mounting. Substitute selection can be made based solely on these product status and compliance attributes.

Frequently Asked Questions (FAQ)

Q1: Which parameters must be strictly matched when substituting DC-DC converter modules?
A1: Substitution requires identical input voltage range, output voltage, output current, isolation voltage, mounting type, package, and compliance status.

Q2: Can JCK6048S12 and SKA60C-12 be used interchangeably in PCB layouts?
A2: Both are supplied in 8-DIP modules designed for through-hole mounting with similar physical dimensions.

Q3: Do both parts support the same safety and protection features?
A3: Both provide Remote On/Off, OCP, OVP, and SCP features; UVLO is specified only for JCK6048S12.

Q4: What environmental and compliance standards are met by both parts?
A4: Both parts are ROHS3 compliant and have an MSL of 1 (Unlimited), with ECCN classification EAR99.

Q5: Are there significant differences in electrical performance between these substitutes?
A5: Both modules operate with the same input and output specifications and have comparable efficiency and isolation voltages as detailed in the parameter comparison table.