JC6-P208-02 Equivalent & Substitute Parts

Part Overview

The JC6-P208-02 is a 2-circuit barrier block connector manufactured by TE Connectivity AMP Connectors. This terminal block features a 0.375" (9.53mm) pitch with screw termination and captive plate design, rated for 20A at 300V. The component is actively produced and maintained in inventory. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits cross-manufacturer compatibility.

Substiute Parts

JC6-P208-02

TE Connectivity AMP ConnectorsIn Stock: 1106JC6-P208-02 Datasheet

Current PartRFQ

CBP-2

Curtis IndustriesIn Stock: 1080CBP-2 Datasheet

SimilarRFQ

CBPW-2

Curtis IndustriesIn Stock: 1119CBPW-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JC6-P208-02 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Terminal Block Type: Barrier Block
• Number of Circuits: 2
• Pitch: 0.375" (9.53mm)
• Current Rating: 20A
• Voltage Rating: 300V
• Wire Gauge: 12-22 AWG
• Barrier Type: 2 Wall (Dual)
• Bottom Termination: PC Pin
• Mounting Type: Chassis, Panel; Through Hole
• Flammability Rating: UL94 V-0
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Top Termination: Screws with Captive Plate (primary) or Screws (alternative)
• Operating Temperature: 105°C (primary) or higher
• Manufacturer: TE Connectivity AMP Connectors (primary) or Curtis Industries (substitute)
• RoHS Status: RoHS Compliant or ROHS3 Compliant
• REACH Status: Vendor Undefined or REACH Unaffected

The identified substitutes CBP-2 and CBPW-2 from Curtis Industries meet all mandatory parameters and are therefore electrically and mechanically compatible with the JC6-P208-02.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: JC6-P208-02

The JC6-P208-02 maintains active product status with RoHS compliance and established supply chain availability. This part is the specified design choice and should be used when procurement constraints do not apply.

Substitute Option 1: CBPW-2 (Curtis Industries)

The CBPW-2 is the closest functional equivalent to the JC6-P208-02. Both parts feature identical top termination (screws with captive plate), matching all critical electrical and mechanical parameters. The CBPW-2 provides enhanced operating temperature capability (140°C versus 105°C) and ROHS3 compliance. This substitute is suitable for direct replacement in applications where the design accommodates Curtis Industries manufacturing tolerances and insulation material specifications.

Substitute Option 2: CBP-2 (Curtis Industries)

The CBP-2 differs from the JC6-P208-02 in top termination design, featuring standard screws without captive plate. This variant is electrically and mechanically compatible but requires design verification for mounting and assembly compatibility. The CBP-2 also provides enhanced operating temperature capability (140°C) and ROHS3 compliance. This substitute is applicable when captive plate functionality is not required by the application.

Both Curtis Industries substitutes carry REACH Unaffected status, providing regulatory clarity for international applications.

Frequently Asked Questions (FAQ)

Q: Can CBP-2 be used as a direct replacement for JC6-P208-02?

A: CBP-2 is electrically and mechanically compatible with JC6-P208-02 across all critical parameters including current rating, voltage rating, wire gauge, pitch, and barrier configuration. The primary difference is the absence of a captive plate on the screw termination. Direct replacement is possible if the application does not require captive plate functionality for assembly or operational purposes.

Q: What is the difference between CBPW-2 and CBP-2?

A: Both parts are manufactured by Curtis Industries and share identical electrical specifications. The CBPW-2 includes a captive plate on the screw termination, matching the JC6-P208-02 design. The CBP-2 features standard screws without captive plate. Selection between these variants depends on assembly requirements and mounting methodology.

Q: Are the Curtis Industries substitutes fully compatible with the TE Connectivity JC6-P208-02?

A: Both CBPW-2 and CBP-2 meet all mandatory compatibility parameters: 2-circuit barrier block configuration, 0.375" pitch, 20A current rating, 300V voltage rating, 12-22 AWG wire gauge, dual-wall barrier type, PC pin bottom termination, and UL94 V-0 flammability rating. Compatibility is confirmed for electrical and mechanical function. Physical mounting and assembly compatibility should be verified for specific application requirements.

Q: What are the temperature operating differences between these parts?

A: The JC6-P208-02 operates to 105°C maximum. Both Curtis Industries substitutes (CBPW-2 and CBP-2) operate to 140°C maximum. This represents an allowable variation that does not restrict substitution; applications operating within the 105°C limit are fully compatible with either substitute.

Q: Do all three parts have the same regulatory compliance?

A: All three parts carry UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity level. The JC6-P208-02 is RoHS Compliant with Vendor Undefined REACH status. Both Curtis Industries parts are ROHS3 Compliant with REACH Unaffected status. All three parts share EAR99 ECCN and 8536.90.4000 HTSUS classification.

Q: What packaging is available for these parts?

A: The JC6-P208-02 is available in standard packaging. Both CBP-2 and CBPW-2 are supplied in bulk packaging. Packaging format should be confirmed with procurement requirements for the specific application.

Q: Can these parts be intermixed in a single assembly?

A: All three parts are mechanically and electrically equivalent across critical parameters. Intermixing is permissible from a functional standpoint. Design documentation and assembly procedures should specify part selection to maintain consistency and traceability.