IXGP7N60B IGBT Equivalent & Substitute Parts

Part Overview

The IXGP7N60B is a 600V, 14A IGBT manufactured by IXYS in the HiPerFAST™ series, housed in a TO-220-3 through-hole package. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives for new designs and ongoing production requirements. Substitute parts must maintain electrical compatibility across voltage, current, and thermal operating ranges while accommodating the through-hole TO-220-3 mounting configuration.

Substiute Parts

IXGP7N60B

IXYSIn Stock: 2999IXGP7N60B Datasheet

Current PartRFQ

IXGP20N120B3

IXYSIn Stock: 1076IXGP20N120B3 Datasheet

DirectRFQ

IKA15N60TXKSA1

Infineon TechnologiesIn Stock: 800IKA15N60TXKSA1 Datasheet

SimilarRFQ

STGF7H60DF

STMicroelectronicsIn Stock: 1288STGF7H60DF Datasheet

SimilarRFQ

STGP7H60DF

STMicroelectronicsIn Stock: 951STGP7H60DF Datasheet

SimilarRFQ

STGP7NC60HD

STMicroelectronicsIn Stock: 1925STGP7NC60HD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IXGP7N60B are selected based on the following electrical and mechanical criteria:

Primary Matching Criteria:

• Voltage rating: 600V collector-emitter breakdown voltage
• Current rating: Minimum 14A continuous collector current
• Package: TO-220-3 through-hole configuration
• Input type: Standard gate drive

Secondary Compatibility Factors:

• Vce(on) saturation voltage within acceptable operating range
• Gate charge and switching characteristics suitable for existing gate drive circuits
• Operating temperature range encompassing -55°C to 150°C
• Moisture sensitivity level MSL 1 (Unlimited)

Substitute parts are classified into two categories: direct replacements (matching all primary criteria) and similar alternatives (meeting voltage and current requirements with minor parameter variations).

Parameter Comparison

Engineering Selection Recommendations

Direct Replacement Category (600V, 14A Rating):

The IKA15N60TXKSA1 (Infineon TrenchStop®) and STGF7H60DF / STGP7H60DF (STMicroelectronics Trench Field Stop) provide electrical equivalence to the IXGP7N60B within the 600V, 14A specification envelope. All three alternatives are active products with ROHS3 compliance and MSL 1 moisture sensitivity rating. The IKA15N60TXKSA1 offers a current rating of 14.7A with extended operating temperature range to 175°C. The STMicroelectronics options (STGF7H60DF and STGP7H60DF) maintain identical 14A continuous current ratings with improved Vce(on) saturation voltage (1.95V versus 2V) and lower switching energy characteristics.

Higher Current Capacity Alternative:

The STGP7NC60HD (STMicroelectronics PowerMESH™) provides 25A continuous current capability within the 600V voltage class, offering increased design margin for applications requiring higher current handling. This part maintains TO-220-3 packaging and ROHS3 compliance with active product status.

Higher Voltage Alternative (Not Recommended for Direct Substitution):

The IXGP20N120B3 operates at 1200V with 36A current rating. This part exceeds the voltage specification of the IXGP7N60B and is suitable only for applications requiring higher voltage operation. Direct substitution is not recommended without circuit redesign.

Compliance and Availability:

All recommended substitute parts maintain REACH Unaffected status and EAR99 ECCN classification consistent with the original IXGP7N60B. Active product status ensures long-term availability and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the IXGP20N120B3 be used as a direct replacement for the IXGP7N60B?

A: The IXGP20N120B3 is not a direct replacement. While both are IXYS IGBTs in TO-220-3 packages, the IXGP20N120B3 operates at 1200V, which exceeds the 600V specification of the IXGP7N60B. Use this part only in applications designed for higher voltage operation.

Q: What are the key differences between the STMicroelectronics STGF7H60DF and STGP7H60DF?

A: Both parts share identical electrical specifications (600V, 14A, Trench Field Stop technology). The primary difference is power dissipation rating: STGF7H60DF is rated at 24W while STGP7H60DF is rated at 88W. Package designation differs (TO-220FP versus TO-220), but both are through-hole TO-220-3 configurations. Selection depends on thermal management requirements in the application.

Q: Does the IKA15N60TXKSA1 require different gate drive circuitry?

A: The IKA15N60TXKSA1 maintains standard gate drive input type compatible with the IXGP7N60B. However, gate charge is 87nC compared to 25nC in the original part, requiring verification that existing gate drive circuits can supply adequate charge within acceptable switching time parameters.

Q: Are all substitute parts RoHS compliant?

A: Yes. All recommended substitute parts (IKA15N60TXKSA1, STGF7H60DF, STGP7H60DF, STGP7NC60HD) are ROHS3 compliant. The original IXGP7N60B RoHS status is not specified in available documentation.

Q: What is the operating temperature range consideration for substitution?

A: The IXGP7N60B operates from -55°C to 150°C. The IKA15N60TXKSA1 and STMicroelectronics parts extend the upper limit to 175°C, providing additional thermal margin. The STGP7NC60HD maintains the 150°C upper limit. All parts support the -55°C lower limit.

Q: Can the STGP7NC60HD be used in place of the IXGP7N60B?

A: The STGP7NC60HD is electrically compatible at 600V and 14A continuous current levels. The part provides 25A maximum current rating, offering design margin above the 14A specification. Vce(on) saturation voltage is 2.5V at test conditions, slightly higher than the 2V specification of the IXGP7N60B. Thermal design must account for the 80W power rating versus 54W in the original part.

Q: What packaging considerations apply to these substitutes?

A: All substitute parts use TO-220-3 through-hole packaging, maintaining mechanical compatibility with the IXGP7N60B. Supplier device package designations vary (TO-220, TO-220FP, PG-TO220-3-31) but all conform to standard TO-220-3 pinout and mounting footprint requirements.