IXGP12N60C IGBT Equivalent & Substitute Parts

Part Overview

The IXGP12N60C is a 600V, 24A IGBT manufactured by IXYS in the HiPerFAST™ series, housed in a TO-220-3 through-hole package with a maximum power rating of 100W. This device is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design requirements and production continuity. Substitute parts are selected based on matching or exceeding critical electrical parameters while maintaining compatible package and mounting specifications.

Substiute Parts

IXGP12N60C

IXYSIn Stock: 985IXGP12N60C Datasheet

Current PartRFQ

IXYP20N120C3

IXYSIn Stock: 778IXYP20N120C3 Datasheet

DirectRFQ

STGP10H60DF

STMicroelectronicsIn Stock: 1728STGP10H60DF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IXGP12N60C are identified based on the following substitution criteria:

Primary Substitution Logic:

• Voltage rating must equal or exceed 600V collector-emitter breakdown voltage
• Current rating (Ic) must equal or exceed 24A continuous collector current
• Package type must be TO-220-3 through-hole configuration for mechanical and thermal compatibility
• Input type must be Standard gate drive
• Mounting type must be Through Hole

Substitution Categories:

1. Direct Voltage/Current Match (600V Class): Parts maintaining the same 600V voltage rating with equal or higher current capacity
2. Higher Voltage Rating (1200V Class): Parts with elevated voltage ratings suitable for applications requiring additional voltage margin, with current ratings exceeding 24A

Both substitute parts listed maintain TO-220-3 packaging and through-hole mounting, ensuring direct mechanical compatibility with existing PCB layouts and thermal management solutions.

Parameter Comparison

Engineering Selection Recommendations

STGP10H60DF (STMicroelectronics): This part operates at the same 600V voltage rating as the IXGP12N60C with a slightly reduced continuous current rating of 20A versus 24A. The STGP10H60DF is classified as Active with ROHS3 compliance and an extended operating temperature range to 175°C. The Trench Field Stop IGBT type provides lower on-state voltage (1.95V) compared to the main part (2.7V), resulting in reduced conduction losses. This substitute is suitable for applications where the 20A current rating is sufficient and lower power dissipation is beneficial. Higher gate charge (57nC) and off-state switching energy (140µJ) require gate driver adjustment consideration.

IXYP20N120C3 (IXYS): This part provides elevated voltage rating (1200V) with significantly higher current capacity (40A) and power rating (278W). The IXYP20N120C3 is Active with ROHS3 compliance and extended temperature range to 175°C. This substitute accommodates applications requiring higher voltage margins or increased current headroom. The higher on-state voltage (3.4V @ 20A) and switching energy (1.3mJ on, 500µJ off) indicate increased power dissipation compared to the main part. Gate charge is 53nC with turn-off delay of 90ns. This device is suitable for designs where voltage derating or current margin is required.

Both substitute parts maintain TO-220-3 packaging and through-hole mounting for direct mechanical compatibility. Selection between substitutes depends on specific application voltage and current requirements, thermal management capability, and gate driver specifications.

Frequently Asked Questions (FAQ)

Q: Can the STGP10H60DF directly replace the IXGP12N60C in all applications?

A: The STGP10H60DF operates at the same 600V voltage rating but with a reduced continuous current rating of 20A compared to 24A. Direct replacement is possible only in applications where the maximum required collector current does not exceed 20A. The lower on-state voltage (1.95V vs 2.7V) reduces conduction losses. Gate charge is higher (57nC vs 32nC), requiring gate driver output current verification.

Q: What are the advantages of using the IXYP20N120C3 over the IXGP12N60C?

A: The IXYP20N120C3 provides a 1200V voltage rating with 40A continuous current capacity and 278W power rating, compared to 600V, 24A, and 100W for the main part. This substitute offers increased voltage margin for applications subject to voltage transients and higher current capacity for increased design headroom. Extended operating temperature range to 175°C provides additional thermal margin. Trade-offs include higher on-state voltage and switching energy, resulting in increased power dissipation.

Q: Are both substitute parts compatible with existing PCB layouts designed for the IXGP12N60C?

A: Yes. Both STGP10H60DF and IXYP20N120C3 are housed in TO-220-3 through-hole packages with identical mechanical dimensions and pin configurations. Direct PCB mounting compatibility is maintained. Thermal management solutions designed for the 100W main part may require evaluation for the IXYP20N120C3 (278W) if operating at maximum power.

Q: What compliance certifications apply to the substitute parts?

A: Both STGP10H60DF and IXYP20N120C3 are ROHS3 compliant and REACH unaffected. Both carry ECCN classification EAR99 and HTSUS code 8541.29.0095, matching the regulatory classification of the main part. Moisture sensitivity level is 1 (Unlimited) for all three devices.

Q: How do gate charge differences affect circuit design?

A: The IXGP12N60C has gate charge of 32nC, while STGP10H60DF is 57nC and IXYP20N120C3 is 53nC. Higher gate charge requires greater gate driver output current to achieve specified switching times. Gate driver selection and output impedance must be verified to ensure adequate charge delivery within the required switching time window. Turn-on delay (Td on) remains similar at 20ns for both main and IXYP20N120C3, while STGP10H60DF is 19.5ns. Turn-off delay increases to 103ns for STGP10H60DF and 90ns for IXYP20N120C3 compared to 60ns for the main part.

Q: Which substitute part is recommended for new designs?

A: Selection depends on application requirements. For applications requiring 600V operation with current below 20A, STGP10H60DF offers lower conduction losses and active product status. For applications requiring higher voltage margin or current capacity, IXYP20N120C3 provides 1200V rating and 40A capacity. Both are active products with current manufacturing support and compliance certifications.