IRGS6B60KDTRLP IGBT 600V 13A Equivalent & Substitute Parts

Part Overview

The IRGS6B60KDTRLP is an NPT (Non-Punch Through) IGBT manufactured by Infineon Technologies, rated for 600V collector-emitter breakdown voltage with a maximum collector current of 13A and 90W power dissipation. This component is packaged in a D2PAK (TO-263-3) surface mount configuration and is classified as obsolete product status. Due to its obsolete designation, equivalent substitute parts with active product status are necessary for new designs and ongoing production requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

IRGS6B60KDTRLP

Infineon TechnologiesIn Stock: 1069IRGS6B60KDTRLP Datasheet

Current PartRFQ

IKB10N60TATMA1

Infineon TechnologiesIn Stock: 752IKB10N60TATMA1 Datasheet

MFR RecommendedRFQ

STGB6NC60HDT4

STMicroelectronicsIn Stock: 1918STGB6NC60HDT4 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IRGS6B60KDTRLP is determined by the following critical parameters that must be maintained or exceeded:

Mandatory Compatibility Parameters:

• Voltage rating: 600V collector-emitter breakdown voltage (minimum requirement)
• Package type: TO-263-3 / D2PAK surface mount configuration
• Mounting type: Surface mount
• Compliance: ROHS3 compliant, MSL Level 1

Performance Parameters for Functional Equivalence:

• Collector current rating: Minimum 13A continuous (Ic Max)
• Power dissipation: Minimum 90W
• Gate charge: Electrical characteristic affecting drive circuit compatibility
• Switching characteristics: On/off delay times and switching energy

The substitute parts identified (IKB10N60TATMA1 and STGB6NC60HDT4) maintain the mandatory 600V voltage rating and D2PAK package configuration. Both substitutes are active product status components with ROHS3 compliance and MSL Level 1 rating, making them suitable replacements for the obsolete IRGS6B60KDTRLP in applications where the electrical performance parameters are compatible with the design requirements.

Parameter Comparison

Engineering Selection Recommendations

IKB10N60TATMA1 (Infineon Technologies): This substitute is an active product with Trench Field Stop technology, offering higher collector current rating (20A) and power dissipation (110W) compared to the IRGS6B60KDTRLP. The component maintains 600V voltage rating and D2PAK packaging. It is ROHS3 compliant with MSL Level 1 rating. The extended operating temperature range (-40°C to 175°C) provides broader thermal operating capability. This part is suitable for applications requiring higher current capacity within the same voltage class and package footprint.

STGB6NC60HDT4 (STMicroelectronics): This substitute is an active product with PowerMESH™ technology, offering 15A collector current and 56W power dissipation. The component maintains 600V voltage rating and D2PAK packaging with ROHS3 compliance and MSL Level 1 rating. Operating temperature range matches the original part (-55°C to 150°C). This part is suitable for applications where power dissipation requirements are lower than the original specification while maintaining voltage and package compatibility.

Both substitutes are active product status components with full regulatory compliance (ROHS3, REACH Unaffected, EAR99 ECCN classification). Selection between substitutes depends on specific application requirements for collector current, power dissipation, and switching characteristics.

Frequently Asked Questions (FAQ)

Q: Can the IKB10N60TATMA1 directly replace the IRGS6B60KDTRLP in existing designs?

A: The IKB10N60TATMA1 maintains the same 600V voltage rating and D2PAK package configuration. However, differences exist in gate charge (62nC vs. 18.2nC), switching energy, and on-delay time. Gate drive circuit compatibility must be evaluated based on the specific driver circuit design. The higher collector current rating (20A vs. 13A) and power dissipation (110W vs. 90W) provide design margin but do not prevent substitution in applications designed for the original 13A specification.

Q: What are the key differences between the two substitute parts?

A: IKB10N60TATMA1 offers higher current capacity (20A) and power dissipation (110W) with extended temperature range (-40°C to 175°C). STGB6NC60HDT4 provides lower power dissipation (56W) with faster switching characteristics (76ns off-delay vs. 215ns). Both maintain 600V rating and D2PAK packaging. Selection depends on application current requirements and thermal design constraints.

Q: Are both substitute parts available in the same packaging as the original IRGS6B60KDTRLP?

A: Yes. All three parts use TO-263-3 / D2PAK surface mount packaging with identical lead configuration (2 Leads + Tab). PCB footprint compatibility is maintained across all three components.

Q: What is the significance of the Trench Field Stop technology in the IKB10N60TATMA1?

A: Trench Field Stop is a manufacturing technology that affects switching characteristics and gate charge. The IKB10N60TATMA1 exhibits higher gate charge (62nC) compared to the original part (18.2nC), which impacts gate drive circuit requirements and switching speed. This technology enables higher current ratings within the same package.

Q: Do all three parts meet the same regulatory compliance standards?

A: Yes. All three components are ROHS3 compliant, REACH Unaffected, and classified as EAR99 under ECCN. All three have MSL Level 1 (Unlimited) moisture sensitivity rating. Regulatory compliance is equivalent across all parts.

Q: What is the impact of different gate charge values on circuit design?

A: Gate charge affects the total charge required to switch the IGBT on and off. The STGB6NC60HDT4 has the lowest gate charge (13.6nC), requiring less drive current. The IKB10N60TATMA1 has significantly higher gate charge (62nC), requiring higher drive current capability. The original IRGS6B60KDTRLP has intermediate gate charge (18.2nC). Gate driver circuit design must accommodate the gate charge specification of the selected substitute.

Q: Can the STGB6NC60HDT4 be used in high-current applications originally designed for the IRGS6B60KDTRLP?

A: The STGB6NC60HDT4 has a lower collector current rating (15A vs. 13A), providing only marginal increase. For applications requiring sustained operation at or near 13A, this part offers limited design margin. The 56W power dissipation rating is also lower than the original 90W specification. This part is suitable for applications with lower current and power requirements than the original design.