Equivalent & Substitute Parts for IN-S85TAS5R5G5B

Part Overview

The IN-S85TAS5R5G5B is an RGB LED indicator manufactured by Inolux, configured as a common anode surface mount component with right-angle mounting. This 4-SMD, no-lead package combines red (622nm), green (518nm), and blue (467nm) discrete LEDs in a single clear lens assembly. The part is Active status and ROHS3 compliant, designed for LED indication applications requiring simultaneous multi-color output.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance are maintained across the specified parameter set.

Substiute Parts

IN-S85TAS5R5G5B

InoluxIn Stock: 3325IN-S85TAS5R5G5B Datasheet

Current PartRFQ

IN-S85TBS5R5G5B

InoluxIn Stock: 4016IN-S85TBS5R5G5B Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IN-S85TAS5R5G5B is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• RGB color configuration with identical wavelengths (622nm Red, 518nm Green, 467nm Blue)
• Common anode configuration
• Forward voltage specifications: 2V Red, 2.8V Green, 2.8V Blue
• Test current: 5mA per color channel
• Millicandela ratings: 35mcd Red, 230mcd Green, 35mcd Blue
• Viewing angle: 120°

Mechanical Equivalence Criteria:

• Surface mount, right-angle mounting type
• 4-SMD, no-lead package
• Clear lens with rectangle flat-top style
• Lens dimensions: 1.40mm x 0.60mm
• Overall dimensions: 2.00mm L x 1.10mm W x 0.70mm H (Max)

Regulatory & Compliance Equivalence:

• ROHS3 compliance
• MSL 3 rating (168 Hours)
• Active product status

The substitute part IN-S85TBS5R5G5B meets all specified parameters identically to the main part number.

Parameter Comparison

Engineering Selection Recommendations

Both IN-S85TAS5R5G5B and IN-S85TBS5R5G5B are Active status products manufactured by Inolux with full ROHS3 compliance and identical MSL 3 ratings. Selection between these parts is based on inventory availability and supply chain considerations rather than technical differentiation.

The IN-S85TAS5R5G5B maintains 3232 pieces in current inventory. The IN-S85TBS5R5G5B substitute maintains 3992 pieces in current inventory, providing alternative sourcing when primary part availability is constrained.

Both parts satisfy identical electrical performance requirements for RGB LED indication applications with common anode configuration, 120° viewing angle, and specified luminous intensity across all color channels. Mechanical compatibility is assured through identical surface mount right-angle mounting, 4-SMD no-lead package geometry, and physical dimensions.

Regulatory compliance is equivalent across both parts, with ROHS3 certification and MSL 3 moisture sensitivity rating applicable to both components.

Frequently Asked Questions (FAQ)

Q: Can IN-S85TBS5R5G5B be used as a direct replacement for IN-S85TAS5R5G5B?

A: Yes. Both parts are manufactured by Inolux with identical electrical specifications, mechanical dimensions, and regulatory compliance. The parts are electrically and mechanically interchangeable for all applications requiring RGB LED indication with common anode configuration.

Q: Are the forward voltage specifications identical between these parts?

A: Yes. Both parts specify 2V forward voltage for the red channel and 2.8V for green and blue channels at 5mA test current. Luminous intensity ratings are identical at 35mcd red, 230mcd green, and 35mcd blue.

Q: Do both parts have the same physical footprint?

A: Yes. Both parts use identical 4-SMD no-lead package with 2.00mm length, 1.10mm width, and 0.70mm maximum height. Lens dimensions are 1.40mm x 0.60mm with rectangle flat-top style. Surface mount right-angle mounting is identical.

Q: What is the difference between these two part numbers?

A: The provided parameters show no technical differences between IN-S85TAS5R5G5B and IN-S85TBS5R5G5B. Both are Active status Inolux products with identical specifications. Differences are limited to inventory availability and supply chain sourcing.

Q: Are both parts ROHS3 compliant?

A: Yes. Both IN-S85TAS5R5G5B and IN-S85TBS5R5G5B are ROHS3 compliant with MSL 3 moisture sensitivity rating (168 hours).

Q: What is the viewing angle for these RGB LEDs?

A: Both parts specify 120° viewing angle, applicable to all three color channels in the common anode configuration.

Q: Can these parts be used in high-temperature applications?

A: Temperature specifications are not provided in the available parameters. Thermal performance data must be obtained from the manufacturer datasheet for specific application requirements.