ICS30SN15PCM1-FB Equivalent & Substitute Parts

Part Overview

The ICS30SN15PCM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact object detection in industrial applications. This sensor features a 15mm cylindrical sensing distance with PNP-NC output configuration and operates across a wide voltage range of 10V to 36V. The product is classified as obsolete, making identification of functionally equivalent alternatives necessary for system maintenance, repair, and component sourcing in ongoing production environments.

Substiute Parts

ICS30SN15PCM1-FB

Carlo Gavazzi Inc.In Stock: 1049ICS30SN15PCM1-FB Datasheet

Current PartRFQ

ICF30L45N22M1IO

Carlo Gavazzi Inc.In Stock: 874ICF30L45N22M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ICS30SN15PCM1-FB is evaluated based on the following critical parameters that define functional equivalence:

Primary Compatibility Criteria:

• Sensor type (inductive technology)
• Physical form factor (M30 cylindrical threaded package)
• Termination method (connector-based)
• Material composition (stainless steel body)
• Environmental protection rating (IP67 minimum)
• Operating temperature range (-40°C ~ 85°C)
• Supply voltage compatibility (10V ~ 36V range)

Secondary Consideration:

• Output configuration (PNP logic family)
• Sensing distance tolerance (15mm nominal)

The ICF30L45N22M1IO is identified as a manufacturer-recommended substitute. While this part operates at a different sensing distance (22mm versus 15mm), it maintains compatibility across the M30 cylindrical package format, stainless steel construction, connector termination, and environmental protection specifications. Both sensors are manufactured by Carlo Gavazzi Inc. and share the same operating temperature range and ingress protection standards.

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45N22M1IO serves as the manufacturer-recommended substitute for the obsolete ICS30SN15PCM1-FB. Selection of this alternative is supported by the following engineering factors:

Product Lifecycle Status: The ICS30SN15PCM1-FB is classified as obsolete, while the ICF30L45N22M1IO maintains active production status, ensuring long-term component availability and supply chain continuity.

Compliance and Certification: Both sensors maintain identical operating temperature specifications (-40°C ~ 85°C) and share REACH Unaffected and EAR99 ECCN classifications. The substitute achieves RoHS3 compliance, meeting current regulatory requirements for electronic components.

Physical and Environmental Compatibility: Both sensors utilize the M30 cylindrical threaded package format with stainless steel construction, enabling direct mechanical installation in existing mounting configurations. Both maintain connector-based termination and exceed IP67 environmental protection requirements.

Functional Differences Requiring Evaluation: The ICF30L45N22M1IO operates at a 22mm sensing distance compared to the original 15mm specification, and features PNP-NO output logic versus the original PNP-NC configuration. These differences necessitate application-level assessment to confirm compatibility with existing detection requirements and control circuit logic.

Frequently Asked Questions (FAQ)

Q: Can the ICF30L45N22M1IO be directly installed in place of the ICS30SN15PCM1-FB?

A: Mechanical installation is compatible due to identical M30 cylindrical threaded packaging. However, the increased sensing distance (22mm versus 15mm) and reversed output logic (NO versus NC) require verification that the application's detection geometry and control circuit logic accommodate these differences.

Q: What is the primary reason for substitution?

A: The ICS30SN15PCM1-FB is classified as obsolete. The ICF30L45N22M1IO is the manufacturer-recommended active alternative, ensuring continued component availability and compliance with current production standards.

Q: Are the environmental protection ratings equivalent?

A: Both sensors meet IP68 and IP69K standards. The original part additionally lists IP67, while the substitute specifies IP68 and IP69K, providing equivalent or enhanced environmental sealing for industrial applications.

Q: What supply voltage does the substitute require?

A: The ICF30L45N22M1IO supply voltage specification is not provided in the manufacturer data. Verification against the original 10V ~ 36V range is required before implementation.

Q: How does the output configuration differ?

A: The original ICS30SN15PCM1-FB provides PNP-NC (normally closed) output, while the ICF30L45N22M1IO provides PNP-NO (normally open) output. Control circuit logic must be evaluated to confirm compatibility with this configuration change.

Q: Are both sensors manufactured by the same company?

A: Yes, both sensors are manufactured by Carlo Gavazzi Inc., ensuring consistent design philosophy and quality standards across the product families.