IA08FSF01NC Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The IA08FSF01NC is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact detection applications with a 1mm sensing distance. This sensor features NPN-NC output configuration, operates across 10V to 30V supply voltage, and is housed in a threaded M8 cylinder package with IP67 ingress protection rating.

The IA08FSF01NC is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain system functionality, ensure supply chain continuity, and support ongoing maintenance and replacement requirements for applications currently utilizing this sensor.

Substiute Parts

IA08FSF01NC

Carlo Gavazzi Inc.In Stock: 1071IA08FSF01NC Datasheet

Current PartRFQ

ICS08S30F20A2IO

Carlo Gavazzi Inc.In Stock: 1230ICS08S30F20A2IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IA08FSF01NC is evaluated based on the following critical parameters that determine functional compatibility:

Mechanical Compatibility: Package type (M8 threaded cylinder), termination style (cable leads), and physical form factor must remain consistent to ensure installation compatibility within existing mounting fixtures and connector interfaces.

Electrical Compatibility: Supply voltage range (10V ~ 30V), output configuration (NPN-NC logic), and wire count (3-wire) must be maintained to ensure direct integration with existing control circuits without circuit redesign.

Sensing Performance: Sensing distance, response frequency, and sensor type (inductive) determine detection capability and application suitability. Variations in these parameters may affect system performance and require application validation.

Environmental Ratings: Ingress protection (IP67), operating temperature range (-25°C ~ 70°C), and material composition (diecast metal) establish the sensor's reliability in specified environmental conditions.

The substitute part ICS08S30F20A2IO shares the same manufacturer (Carlo Gavazzi Inc.), identical supply voltage range, matching package configuration (M8 threaded cylinder), equivalent termination style (cable leads), and identical ingress protection rating (IP67). However, this substitute introduces variations in sensing distance (2mm vs. 1mm), output type (configurable vs. fixed NPN-NC), response frequency (2kHz vs. 500Hz), operating temperature range (-25°C ~ 80°C vs. -25°C ~ 70°C), and body material (stainless steel vs. diecast metal).

Parameter Comparison

Engineering Selection Recommendations

The ICS08S30F20A2IO is an active product from Carlo Gavazzi Inc. and represents the current manufacturing alternative to the obsolete IA08FSF01NC. Both sensors maintain identical supply voltage specifications (10V ~ 30V), mechanical form factor (M8 threaded cylinder), termination method (cable leads), and environmental protection rating (IP67).

Selection of the ICS08S30F20A2IO as a substitute requires evaluation of application-specific requirements regarding sensing distance tolerance. The substitute provides a 2mm sensing distance compared to the original 1mm specification, which may necessitate mechanical repositioning or gap adjustment in the target application. The configurable output type of the substitute provides flexibility for output logic selection, whereas the original part specifies fixed NPN-NC configuration.

The substitute's enhanced response frequency (2kHz vs. 500Hz) and extended operating temperature range (-25°C ~ 80°C vs. -25°C ~ 70°C) represent performance improvements. The stainless steel body material of the substitute offers enhanced corrosion resistance compared to the diecast metal construction of the original part, providing potential advantages in corrosive environments.

Frequently Asked Questions (FAQ)

Q: Can the ICS08S30F20A2IO directly replace the IA08FSF01NC without any modifications?

A: Direct mechanical and electrical installation is possible due to matching M8 threaded cylinder package, cable lead termination, and 10V ~ 30V supply voltage compatibility. However, the 2mm sensing distance of the substitute differs from the original 1mm specification, which may require gap adjustment or repositioning in the application. Output configuration must be verified and set to NPN-NC if the substitute's configurable output is selected.

Q: What are the key differences in sensing performance between these two sensors?

A: The IA08FSF01NC provides 1mm sensing distance with 500Hz response frequency. The ICS08S30F20A2IO provides 2mm sensing distance with 2kHz response frequency. Applications requiring detection at distances closer than 2mm or operating at frequencies below 500Hz may not be compatible with the substitute without application redesign.

Q: Are there environmental or material considerations when substituting these sensors?

A: Both sensors maintain IP67 ingress protection and operate within overlapping temperature ranges (-25°C ~ 70°C for the original, -25°C ~ 80°C for the substitute). The substitute features stainless steel body construction versus diecast metal in the original part, providing enhanced corrosion resistance in chemically aggressive or high-humidity environments.

Q: What is the product status difference between these two sensors?

A: The IA08FSF01NC is classified as obsolete, indicating discontinued manufacturing and limited availability. The ICS08S30F20A2IO is classified as active, indicating current production and ongoing availability from Carlo Gavazzi Inc.