HW-C10 Equivalent & Substitute Parts

Part Overview

The HW-C10 is a configurable contact block manufactured by IDEC, designed as a SPST-NO (Single Pole Single Throw - Normally Open) switch component rated for 10A at 110VAC operation. This component functions as a modular contact block that requires a compatible switch body for complete assembly. The HW-C10 is classified as obsolete, making identification of active equivalent parts essential for ongoing system maintenance and new design implementations.

Substiute Parts

HW-C10

IDECIn Stock: 869HW-C10 Datasheet

Current PartRFQ

HW-U10

IDECIn Stock: 1294HW-U10 Datasheet

SimilarRFQ

HW-U10-F

IDECIn Stock: 799HW-U10-F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HW-C10 are qualified based on strict electrical and mechanical parameter alignment within the IDEC HW series. The substitution criteria are:

• Identical circuit configuration (SPST-NO)
• Matching contact rating (10A @ 110VAC)
• Same termination style (Screw Terminal)
• Compatible series designation (HW)
• Equivalent RoHS compliance status (ROHS3)
• Identical functional requirement (Configurable Contact Block requiring Switch Body)

The HW-U10 and HW-U10-F meet all substitution criteria and are classified as active products, providing direct functional equivalence to the obsolete HW-C10.

Parameter Comparison

Engineering Selection Recommendations

Both HW-U10 and HW-U10-F provide direct substitution for the obsolete HW-C10 based on identical electrical specifications and mechanical compatibility. Selection between the two active alternatives should be based on packaging and inventory availability:

HW-U10 is the base product designation with 1191 units in stock, offered in bulk packaging.

HW-U10-F is a variant of the HW-U10 base product with 707 units in stock, also offered in bulk packaging.

Both parts maintain ROHS3 compliance and EAR99 export classification, ensuring regulatory consistency with the original HW-C10 specification.

Frequently Asked Questions (FAQ)

Q: Can HW-U10 and HW-U10-F be used interchangeably with HW-C10?

A: Yes. Both HW-U10 and HW-U10-F are direct functional equivalents to HW-C10. They share identical circuit configuration (SPST-NO), contact rating (10A @ 110VAC), termination style (Screw Terminal), and series compatibility (HW). The primary difference is product status: HW-C10 is obsolete while HW-U10 and HW-U10-F are active products.

Q: What is the difference between HW-U10 and HW-U10-F?

A: HW-U10-F is designated as a variant of the HW-U10 base product. Both maintain identical electrical and mechanical specifications. The "-F" suffix indicates a product variant within the IDEC HW series. Selection between them should be based on availability and packaging requirements.

Q: Are there any compliance differences between the substitute parts and the original HW-C10?

A: No. All three parts (HW-C10, HW-U10, HW-U10-F) are ROHS3 compliant and classified under ECCN EAR99. The substitute parts maintain full regulatory equivalence to the original component.

Q: Why is HW-C10 listed as obsolete?

A: HW-C10 has been discontinued by IDEC. HW-U10 and HW-U10-F are the active product line replacements that provide identical functionality and specifications for new designs and system maintenance.

Q: What packaging is available for the substitute parts?

A: Both HW-U10 and HW-U10-F are supplied in bulk packaging, suitable for integration into manufacturing and assembly operations.