HS5E-VC4403-G Equivalent & Substitute Parts

Part Overview

The HS5E-VC4403-G is an interlock solenoid release switch manufactured by IDEC, classified as a DPST (Double Pole Single Throw) device with dual circuit configuration (DPST-NO/NC + DPST-NC). This component is rated for 2.5A at 125VAC or 30VDC, with 24VDC supply voltage and 143kgf holding force. The part is designated as obsolete, making identification of functionally equivalent alternatives necessary for system maintenance and component replacement in existing installations.

Substiute Parts

HS5E-VC4403-G

IDECIn Stock: 1114HS5E-VC4403-G Datasheet

Current PartRFQ

HS5L-VC44M-G

IDECIn Stock: 834HS5L-VC44M-G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HS5E-VC4403-G is determined by strict equivalence across the following critical parameters:

• Circuit configuration: DPST-NO/NC + DPST-NC
• Current rating: 2.5A (AC/DC)
• Voltage rating: 125VAC, 30VDC
• Supply voltage: 24VDC
• Holding force: 143kgf
• Actuator type: Panel Disconnect
• Ingress protection: IP67
• RoHS compliance: ROHS3

The HS5L-VC44M-G qualifies as a substitute based on matching all critical electrical and mechanical parameters. Differences in termination style (Spring Terminal vs. Cable Leads), operating temperature range extension (-25°C to 55°C vs. -25°C to 50°C), and conduit thread size (M20) do not prevent functional substitution when mechanical integration is accommodated.

Parameter Comparison

Engineering Selection Recommendations

The HS5L-VC44M-G is the designated substitute for the obsolete HS5E-VC4403-G. Selection of this alternative is supported by:

• Active product status, ensuring continued availability and manufacturing support
• Identical electrical specifications across all critical parameters (circuit, current, voltage, holding force)
• Equivalent ingress protection rating (IP67)
• Enhanced regulatory compliance with UL approval in addition to existing certifications
• Extended operating temperature range providing broader environmental tolerance

Integration considerations include accommodation of Spring Terminal termination in place of Cable Leads and mechanical mounting adjustment for M20 conduit thread size. These differences do not affect electrical performance or functional compatibility within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can the HS5L-VC44M-G directly replace the HS5E-VC4403-G without circuit modification?

A: Yes. Both parts share identical circuit configuration (DPST-NO/NC + DPST-NC), current rating (2.5A AC/DC), voltage rating (125VAC, 30VDC), and supply voltage (24VDC). Electrical integration requires no circuit changes.

Q: What is the difference between Cable Leads and Spring Terminal termination?

A: Cable Leads provide pre-attached wiring for direct connection. Spring Terminal requires external wire insertion into terminal blocks. Selection depends on existing wiring infrastructure and installation method.

Q: Does the extended operating temperature range of the HS5L-VC44M-G affect compatibility?

A: No. The HS5L-VC44M-G operates from -25°C to 55°C, which encompasses the original -25°C to 50°C range. The extended upper limit provides additional environmental tolerance without affecting performance within the original specification.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the HS5E-VC4403-G and HS5L-VC44M-G are ROHS3 compliant, meeting hazardous substance restrictions.

Q: What regulatory approvals does the substitute part carry?

A: The HS5L-VC44M-G carries CCC, CE, TUV, and UL approvals, providing broader regulatory coverage than the original part (CCC, CE, cURus, TUV).

Q: Is mechanical mounting adjustment required for the M20 conduit thread size?

A: The HS5L-VC44M-G includes M20 conduit thread specification. Installation requires verification that existing mounting provisions accommodate this thread size, or appropriate adapter hardware must be employed.