HM2P07PDP2P1N9 Equivalent & Substitute Parts

Part Overview

The HM2P07PDP2P1N9 is a 154-position header connector (110 + 44 Ground) manufactured by Amphenol ICC (FCI) from the Millipacs® series. This through-hole, press-fit connector features a 2.00mm pitch and is designed for backplane applications. The part is currently listed as obsolete, making identification of equivalent and substitute components essential for ongoing system support and new design implementations.

Substiute Parts

HM2P07PDP2P1N9

Amphenol ICC (FCI)In Stock: 1005HM2P07PDP2P1N9 Datasheet

Current PartRFQ

HM2P07PDP2P1N9LF

Amphenol ICC (FCI)In Stock: 899HM2P07PDP2P1N9LF Datasheet

DirectRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

3-5100143-0

TE Connectivity AMP ConnectorsIn Stock: 10903-5100143-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the HM2P07PDP2P1N9 is based on the following critical parameters:

Primary Substitution Criteria:

• Pitch: 0.079" (2.00mm) — exact match required
• Mounting Type: Through Hole — exact match required
• Termination: Press-Fit — exact match required
• Connector Style: A 22 — exact match required
• Operating Temperature Range: -55°C ~ 125°C — exact match required
• Contact Finish: Gold — exact match required
• Features: Board Guide — exact match required

Secondary Compatibility Factors:

• Number of Positions: The main part has 154 positions (110 + 44 Ground). Substitute parts may have reduced position counts (110 positions) if the application does not require the full ground plane configuration.
• Current Rating: Main part rated at 1.5 A; substitutes may have equal or higher ratings.
• Voltage Rating: Main part rated at 750Vrms; substitutes must meet or exceed this specification.
• Moisture Sensitivity Level: All parts maintain MSL 1 (Unlimited).

Substitutes are grouped into two categories: direct equivalents from the same manufacturer (same position count, active product status) and manufacturer-recommended alternatives (reduced position count, active product status from alternative manufacturers).

Parameter Comparison

Engineering Selection Recommendations

HM2P07PDP2P1N9LF (Direct Amphenol ICC Equivalent)

This part is the direct successor to the obsolete HM2P07PDP2P1N9. It maintains identical electrical and mechanical specifications, including the full 154-position configuration (110 + 44 Ground), 750Vrms voltage rating, and 1.5 A current rating. The primary difference is product status: HM2P07PDP2P1N9LF is active and carries RoHS Compliance certification. Packaging is provided in Tray format. This is the preferred substitute for direct replacement in existing designs.

17011102402 (HARTING har-bus® HM Alternative)

This HARTING connector provides a reduced-position alternative with 110 positions and 5 rows (no dedicated ground plane rows). It maintains the 2.00mm pitch, through-hole press-fit termination, and operating temperature range. Current rating is 1 A (lower than the main part's 1.5 A). Voltage rating is not specified. This part is ROHS3 Compliant and REACH Unaffected. Selection of this part requires confirmation that the application does not require the 44 dedicated ground positions or the higher current rating.

3-5100143-0 (TE Connectivity Z-PACK Alternative)

This TE Connectivity connector also provides a 110-position configuration with 5 rows. It maintains the 2.00mm pitch, through-hole press-fit termination, and operating temperature range. Current rating matches the main part at 1.5 A; however, voltage rating is 500Vrms (lower than the main part's 750Vrms). This part is RoHS Compliant. Selection of this part requires confirmation that the application does not require the 44 dedicated ground positions or the higher voltage rating.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDP2P1N9LF be used as a direct replacement for HM2P07PDP2P1N9?

A: Yes. HM2P07PDP2P1N9LF is the active equivalent with identical position count (154), pitch (2.00mm), current rating (1.5 A), voltage rating (750Vrms), and operating temperature range (-55°C ~ 125°C). The primary difference is product status and RoHS compliance. Packaging differs (Tray vs. unspecified).

Q: What is the difference between the 154-position and 110-position alternatives?

A: The main part HM2P07PDP2P1N9 has 154 positions arranged in 5 + 2 rows, with 44 dedicated ground positions. The 110-position alternatives (17011102402 and 3-5100143-0) have 5 rows with no dedicated ground plane configuration. Selection depends on whether the application requires the full ground plane structure.

Q: Are there electrical differences between the substitute parts?

A: Yes. The HARTING 17011102402 has a current rating of 1 A (vs. 1.5 A for the main part). The TE Connectivity 3-5100143-0 has a voltage rating of 500Vrms (vs. 750Vrms for the main part). Verify that your application requirements do not exceed these reduced ratings.

Q: What compliance certifications apply to each substitute?

A: HM2P07PDP2P1N9LF is RoHS Compliant and REACH Affected. The HARTING 17011102402 is ROHS3 Compliant and REACH Unaffected. The TE Connectivity 3-5100143-0 is RoHS Compliant with REACH status Vendor Undefined. Confirm compliance requirements for your application.

Q: Does packaging format affect electrical or mechanical compatibility?

A: No. Packaging format (Tray, Tube, or unspecified) does not affect electrical or mechanical compatibility. It affects only handling, storage, and logistics. Select based on your procurement and assembly requirements.

Q: Can I use a 110-position connector in a design that originally specified 154 positions?

A: Only if your application does not require the 44 dedicated ground positions or the specific ground plane configuration. Verify PCB layout, signal integrity requirements, and grounding strategy before substitution.