HLMP-3301-F0001 Equivalent & Substitute Parts

Part Overview

The HLMP-3301-F0001 is a red diffused LED indicator in T-1 3/4 through-hole package manufactured by Broadcom Limited. This component is designed for discrete indication applications requiring a 626nm red wavelength with 5.4mcd luminous intensity. The part is currently active in production status and widely used in electronic equipment requiring visual status indication. Substitute parts become necessary when the original packaging format (Tape & Reel) is unavailable or when alternative inventory sources are required to meet procurement timelines and supply chain requirements.

Substiute Parts

HLMP-3301-F0001

Broadcom LimitedIn Stock: 1060HLMP-3301-F0001 Datasheet

Current PartRFQ

HLMP-3301-F0002

Broadcom LimitedIn Stock: 6752HLMP-3301-F0002 Datasheet

Parametric EquivalentRFQ

HLMP-3301-F00DD

Broadcom LimitedIn Stock: 43465HLMP-3301-F00DD Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HLMP-3301-F0001 are determined by strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters that must remain identical:

• Wavelength characteristics (Dominant: 626nm, Peak: 635nm)
• Luminous intensity (5.4mcd)
• Forward voltage (1.9V typical)
• Test current (10mA)
• Viewing angle (60°)
• Lens configuration (Round with Domed Top, 5mm T-1 3/4, Diffused)
• Mounting type (Through Hole, Radial package)
• Physical dimensions (9.19mm maximum height)
• Compliance certifications (ROHS3, REACH Unaffected)

The identified substitute parts HLMP-3301-F0002 and HLMP-3301-F00DD maintain complete electrical and mechanical equivalence to the main part. The only difference between these parts is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitutes are available in Cut Tape (CT) packaging. This packaging difference does not affect component functionality, performance, or circuit compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts—HLMP-3301-F0001, HLMP-3301-F0002, and HLMP-3301-F00DD—are functionally equivalent for circuit design and application purposes. Selection between these parts should be based on procurement and supply chain requirements rather than technical performance criteria.

HLMP-3301-F0001 (Tape & Reel packaging) is suitable for high-volume automated assembly operations where components are fed directly into pick-and-place equipment. HLMP-3301-F0002 and HLMP-3301-F00DD (Cut Tape packaging) are appropriate for lower-volume production runs, manual assembly processes, or situations where component inventory must be managed in smaller quantities.

All parts maintain active production status with Broadcom Limited and carry identical compliance certifications: ROHS3 Compliant and REACH Unaffected. The MSL rating of 1 (Unlimited) indicates these components have no moisture sensitivity restrictions during storage or handling.

Frequently Asked Questions (FAQ)

Q: Can HLMP-3301-F0002 or HLMP-3301-F00DD be used as direct replacements for HLMP-3301-F0001 in circuit applications?

A: Yes. All three parts are electrically and mechanically identical. The only difference is packaging format. They produce identical optical output, operate at the same forward voltage and current, and occupy the same physical space on a PCB.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated assembly equipment. Cut Tape (CT) packaging provides components on tape segments, typically in smaller quantities, for manual assembly or lower-volume production. Both formats contain the same component.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts carry identical RoHS3 compliance and REACH Unaffected status. Moisture sensitivity level is 1 (Unlimited) for all variants, meaning no special storage or handling precautions are required.

Q: Which substitute part should be selected if the original HLMP-3301-F0001 is unavailable?

A: Either HLMP-3301-F0002 or HLMP-3301-F00DD can be selected based on available inventory and packaging requirements. Both are functionally equivalent. HLMP-3301-F00DD currently has higher inventory availability (43,381 pcs) compared to HLMP-3301-F0002 (6,700 pcs).

Q: Do these parts require any circuit design modifications when substituting one for another?

A: No. All three parts operate at identical electrical parameters (1.9V forward voltage, 10mA test current) and have identical physical dimensions. No circuit modifications, PCB layout changes, or firmware adjustments are necessary.