HIN236CB RS232 Transceiver Equivalent & Substitute Parts

Part Overview

The HIN236CB is a 4/3 full-duplex RS232 transceiver manufactured by Renesas Electronics Corporation in 24-SOIC surface mount packaging. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations. The HIN236CB operates within a 4.5V to 5.5V supply range with a 120 Kbps data rate and 500 mV receiver hysteresis, serving as a standard interface component for RS232 serial communication applications.

Substiute Parts

HIN236CB

Renesas Electronics CorporationIn Stock: 2413HIN236CB Datasheet

Current PartRFQ

MAX236CWG+T

Analog Devices Inc./Maxim IntegratedIn Stock: 2104MAX236CWG+T Datasheet

DirectRFQ

MAX236EWG+

Analog Devices Inc./Maxim IntegratedIn Stock: 970MAX236EWG+ Datasheet

UpgradeRFQ

MAX206ECWG+T

Analog Devices Inc./Maxim IntegratedIn Stock: 922MAX206ECWG+T Datasheet

SimilarRFQ

MAX206EEWG+

Analog Devices Inc./Maxim IntegratedIn Stock: 848MAX206EEWG+ Datasheet

SimilarRFQ

MAX206EEWG+T

Analog Devices Inc./Maxim IntegratedIn Stock: 812MAX206EEWG+T Datasheet

SimilarRFQ

MAX206CWG+

Analog Devices Inc./Maxim IntegratedIn Stock: 903MAX206CWG+ Datasheet

Parametric EquivalentRFQ

MAX206ECWG+

Analog Devices Inc./Maxim IntegratedIn Stock: 713MAX206ECWG+ Datasheet

Parametric EquivalentRFQ

MAX236CWG+

Analog Devices Inc./Maxim IntegratedIn Stock: 1171MAX236CWG+ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HIN236CB is determined by strict equivalence across the following critical parameters:

Core Electrical Parameters:

• Protocol: RS232
• Configuration: 4/3 Full Duplex
• Data Rate: 120 Kbps
• Supply Voltage: 4.5V – 5.5V
• Receiver Hysteresis: 500 mV

Physical Parameters:

• Package Type: 24-SOIC (0.295", 7.50mm Width)
• Mounting Type: Surface Mount

Compliance & Status:

• Product Status: Active (preferred for new designs)
• RoHS Compliance: ROHS3 Compliant (preferred)

Substitute parts are grouped into the following categories:

Direct Manufacturer Substitutes: Parts with identical electrical specifications and packaging, differing only in packaging format (Tape & Reel vs. Tube).

Upgrade Substitutes: Parts with identical core electrical specifications but extended operating temperature range (-40°C to 85°C vs. 0°C to 70°C), providing enhanced thermal performance.

Parametric Equivalents: Parts from the MAX206 and MAX236 series that maintain all critical electrical and physical parameters while offering active product status and RoHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Identical Operating Temperature Range):

MAX236CWG+T and MAX206ECWG+T are direct electrical equivalents to the HIN236CB, maintaining the 0°C to 70°C operating temperature specification. Both parts are manufactured by Analog Devices/Maxim Integrated, carry active product status, and comply with ROHS3 standards. MAX236CWG+T is supplied in Tape & Reel format, while MAX206ECWG+T is also available in Tape & Reel. These parts are suitable for applications requiring identical thermal performance to the original HIN236CB.

For Enhanced Thermal Performance:

MAX236EWG+, MAX206EEWG+, and MAX206EEWG+T offer extended operating temperature range (-40°C to 85°C) while maintaining all other electrical parameters. These parts are recommended for applications requiring operation beyond the standard 0°C to 70°C range. All three maintain ROHS3 compliance and active product status.

For General Parametric Equivalence:

MAX206CWG+ and MAX206ECWG+ provide parametric equivalence with the HIN236CB across all critical electrical specifications and packaging. Both are active products with ROHS3 compliance. Selection between these and the MAX236 variants depends on design requirements and packaging format availability.

Compliance Advantage:

All substitute parts listed carry ROHS3 compliance, whereas the HIN236CB is RoHS non-compliant. This compliance improvement is significant for applications subject to environmental regulations or customer requirements mandating RoHS-compliant components.

Frequently Asked Questions (FAQ)

Q: Can MAX236EWG+ be used as a direct replacement for HIN236CB in existing designs?

A: Yes. MAX236EWG+ maintains identical electrical specifications (RS232 protocol, 4/3 full duplex, 120 Kbps data rate, 4.5V–5.5V supply, 500 mV receiver hysteresis) and 24-SOIC packaging. The extended operating temperature range (-40°C to 85°C vs. 0°C to 70°C) provides additional thermal margin without affecting compatibility in standard temperature applications.

Q: What is the difference between Tape & Reel and Tube packaging formats?

A: Tape & Reel packaging is optimized for automated assembly processes and high-volume production, while Tube packaging is suitable for manual handling and lower-volume applications. Both formats contain identical components; the choice depends on manufacturing process requirements and volume.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts listed (MAX236CWG+T, MAX236EWG+, MAX206ECWG+T, MAX206EEWG+, MAX206EEWG+T, MAX206CWG+, MAX206ECWG+, MAX236CWG+) carry ROHS3 compliance. The original HIN236CB is RoHS non-compliant.

Q: What determines whether a part can substitute for HIN236CB?

A: Substitution is determined by equivalence across RS232 protocol, 4/3 full duplex configuration, 120 Kbps data rate, 4.5V–5.5V supply voltage, 500 mV receiver hysteresis, and 24-SOIC packaging. Operating temperature range and product status may vary but do not prevent substitution if core electrical and physical parameters match.

Q: Is MAX206ECWG+T identical to MAX236CWG+T?

A: Both parts are electrically equivalent with identical operating temperature range (0°C–70°C), supply voltage, data rate, and packaging format (Tape & Reel). The primary difference is the base product number (MAX206 vs. MAX236), but both are functionally interchangeable for the HIN236CB application.

Q: Which substitute part offers the best long-term availability?

A: All substitute parts carry active product status from Analog Devices/Maxim Integrated, indicating ongoing production and support. Availability should be verified with component distributors for specific lead times and inventory levels.