HCPL-2219#360 Equivalent & Substitute Parts

Part Overview

The HCPL-2219#360 is a logic output optoisolator designed for high-voltage isolation applications. This component provides 3.75kV isolation with tri-state output capability, supporting data rates up to 2.5MBd and common mode transient immunity of 2.5kV/µs. The part is currently discontinued at DiGi Electronics, making identification of equivalent substitutes necessary for ongoing design support and procurement planning.

Substiute Parts

HCPL-2219#360

Broadcom LimitedIn Stock: 1066HCPL-2219#360 Datasheet

Current PartRFQ

HCPL-2219-360E

Broadcom LimitedIn Stock: 821HCPL-2219-360E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HCPL-2219#360 is determined by strict equivalence across the following critical parameters:

• Isolation Voltage: 3750Vrms (exact match required)
• Number of Channels: 1 (exact match required)
• Output Type: Tri-State (exact match required)
• Common Mode Transient Immunity: 2.5kV/µs (exact match required)
• Data Rate: 2.5MBd (exact match required)
• Package / Case: 8-SMD, Gull Wing (exact match required)
• Mounting Type: Surface Mount (exact match required)

The HCPL-2219-360E meets all substitution criteria as a direct equivalent, differing only in packaging format (Tube vs. standard packaging) and product status (Active vs. Discontinued).

Parameter Comparison

Engineering Selection Recommendations

The HCPL-2219-360E is the direct functional equivalent of the HCPL-2219#360. Both parts share identical electrical and mechanical specifications across all critical parameters. The primary distinction is product status: the HCPL-2219#360 is discontinued, while the HCPL-2219-360E maintains active production status.

An additional consideration is regulatory compliance. The HCPL-2219-360E carries ROHS3 certification, whereas the HCPL-2219#360 is RoHS non-compliant. For applications subject to RoHS requirements, the HCPL-2219-360E is the appropriate selection.

Both parts are supplied by Broadcom Limited and maintain identical isolation voltage, output characteristics, and timing specifications required for direct substitution in circuit designs.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-2219-360E replace the HCPL-2219#360 in existing designs?

A: Yes. The HCPL-2219-360E is electrically and mechanically equivalent to the HCPL-2219#360. All critical parameters—isolation voltage, output type, data rate, propagation delay, and package configuration—are identical. Direct substitution is supported without circuit modification.

Q: What is the difference between HCPL-2219#360 and HCPL-2219-360E?

A: The parts are functionally identical. Differences are limited to product status (discontinued vs. active), packaging format (standard vs. tube), and RoHS compliance status (non-compliant vs. ROHS3 compliant).

Q: Are there any package or pinout differences?

A: No. Both parts use the 8-SMD Gull Wing package with identical pinout and mounting configuration. They are mechanically interchangeable.

Q: Which part should be selected for new designs?

A: The HCPL-2219-360E is recommended for new designs due to active production status and ROHS3 compliance certification.

Q: Does the tube packaging of the HCPL-2219-360E affect compatibility?

A: No. Packaging format (tube vs. standard) does not affect electrical performance or circuit compatibility. The difference is in supply and handling format only.