HCPL-092J-500 Equivalent & Substitute Parts

Part Overview

The HCPL-092J-500 is a General Purpose Digital Isolator manufactured by Broadcom Limited, utilizing Giant Magnetoresistive (GMR) technology. This 4-channel isolator provides 2500Vrms isolation with a data rate of 110MBd and is housed in a 16-SOIC surface mount package. The component is currently in active production status. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility across supply channels.

Substiute Parts

HCPL-092J-500

Broadcom LimitedIn Stock: 917HCPL-092J-500 Datasheet

Current PartRFQ

HCPL-092J-500E

Broadcom LimitedIn Stock: 3330HCPL-092J-500E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HCPL-092J-500 is determined by strict equivalence across the following critical parameters:

• Number of Channels: 4
• Voltage - Isolation: 2500Vrms
• Data Rate: 110MBd
• Common Mode Transient Immunity: 15kV/µs
• Propagation Delay tpLH / tpHL (Max): 15ns, 15ns
• Pulse Width Distortion (Max): 3ns
• Rise / Fall Time (Typ): 1ns, 1ns
• Voltage - Supply: 3V ~ 5.5V
• Operating Temperature: -55°C ~ 125°C
• Package / Case: 16-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Base Product Number: HCPL-092

The identified substitute differs only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and RoHS compliance status, with all electrical and mechanical specifications remaining identical.

Parameter Comparison

Engineering Selection Recommendations

Both the HCPL-092J-500 and HCPL-092J-500E are active production components from Broadcom Limited with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and regulatory compliance needs.

The HCPL-092J-500E offers ROHS3 compliance, making it suitable for applications subject to RoHS regulations. The HCPL-092J-500 is RoHS non-compliant and should be selected only when RoHS compliance is not a requirement.

Packaging format differs between the two parts: the HCPL-092J-500 is supplied in Tape & Reel format, while the HCPL-092J-500E is available in Cut Tape and Digi-Reel® formats. Procurement volume and assembly line requirements should guide packaging selection.

Both components maintain identical moisture sensitivity levels (MSL 1 - Unlimited) and are unaffected by REACH regulations.

Frequently Asked Questions (FAQ)

Q: Can HCPL-092J-500E be used as a direct replacement for HCPL-092J-500?

A: Yes. All electrical specifications, mechanical dimensions, pin configurations, and performance parameters are identical. The only differences are packaging format and RoHS compliance status.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) is a continuous reel format suitable for high-volume automated assembly. Cut Tape (CT) & Digi-Reel® provides flexibility for lower volumes or mixed component orders. Both formats contain the same component in the same 16-SOIC package.

Q: Does RoHS compliance affect component performance?

A: No. RoHS compliance is a regulatory and material composition requirement, not a performance specification. Both parts deliver identical electrical and thermal performance.

Q: Are there any thermal or electrical performance differences between these parts?

A: No. Operating temperature range, supply voltage, isolation voltage, data rate, propagation delay, and all other electrical parameters are identical.

Q: Which part should be selected for new designs?

A: Selection depends on regulatory requirements and packaging preferences. For applications requiring RoHS compliance, select HCPL-092J-500E. For packaging format preference, choose based on assembly line capabilities and order volume.

Q: Is the 16-SOIC package identical for both parts?

A: Yes. Both parts use the same 16-SOIC (0.154", 3.90mm Width) surface mount package with identical pin assignments and mechanical dimensions.