HCPL-0314#560 Equivalent & Substitute Parts

Part Overview

The HCPL-0314#560 is a 3.75kV optical isolation gate driver manufactured by Broadcom Limited, designed for single-channel gate drive applications requiring high-voltage isolation. This component integrates a 600mA peak output capability with 25kV/µs common mode transient immunity in an 8-SOIC surface mount package.

The HCPL-0314#560 is discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for new production runs and field replacements.

Substiute Parts

HCPL-0314#560

Broadcom LimitedIn Stock: 784HCPL-0314#560 Datasheet

Current PartRFQ

HCPL-0314-560E

Broadcom LimitedIn Stock: 4336HCPL-0314-560E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HCPL-0314#560 is determined by strict equivalence across the following critical parameters:

• Isolation voltage rating: 3750Vrms minimum
• Single-channel configuration
• Common mode transient immunity: 25kV/µs minimum
• Peak output current: 600mA
• Output current symmetry: 400mA high and low
• Propagation delay: 700ns maximum for both rising and falling edges
• Rise and fall time: 50ns typical
• Output supply voltage range: 10V to 30V
• Package type: 8-SOIC surface mount
• Operating temperature range: -40°C to 100°C

The HCPL-0314-560E meets all specified parameters and is the direct substitute for the discontinued HCPL-0314#560.

Parameter Comparison

Engineering Selection Recommendations

The HCPL-0314-560E is the direct functional and electrical equivalent of the HCPL-0314#560. Both components share identical electrical specifications, isolation ratings, output characteristics, and package geometry.

The primary distinction is product status and regulatory compliance. The HCPL-0314#560 is discontinued, while the HCPL-0314-560E maintains active production status. Additionally, the HCPL-0314-560E is ROHS3 compliant, whereas the original part is RoHS non-compliant. Both parts carry the same regulatory approvals (CSA, IEC/EN/DIN, UR) and maintain identical moisture sensitivity levels.

For new designs and production applications, the HCPL-0314-560E is the appropriate selection. For existing designs currently using the HCPL-0314#560, direct substitution with the HCPL-0314-560E requires no circuit modifications or re-qualification, as all electrical and mechanical parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can the HCPL-0314-560E be used as a direct replacement for the HCPL-0314#560?

A: Yes. The HCPL-0314-560E is electrically and mechanically identical to the HCPL-0314#560. All isolation voltage, output current, propagation delay, and package specifications are equivalent. No circuit modifications are required.

Q: What is the difference between HCPL-0314#560 and HCPL-0314-560E?

A: The primary differences are product status and RoHS compliance. The HCPL-0314#560 is discontinued and RoHS non-compliant. The HCPL-0314-560E is in active production and ROHS3 compliant. Electrical and mechanical specifications are identical.

Q: Are there any package or pinout differences?

A: No. Both parts use the 8-SOIC (0.154", 3.90mm Width) surface mount package with identical pinout and footprint geometry.

Q: What regulatory certifications apply to both parts?

A: Both the HCPL-0314#560 and HCPL-0314-560E carry approvals from CSA, IEC/EN/DIN, and UR. Both are classified as REACH Unaffected and carry ECCN designation EAR99.

Q: Is the HCPL-0314-560E suitable for applications requiring RoHS compliance?

A: Yes. The HCPL-0314-560E is ROHS3 compliant, making it suitable for applications with RoHS requirements. The original HCPL-0314#560 is not RoHS compliant.