GDS06S Equivalent & Substitute Parts

Part Overview

The GDS06S is a surface mount DIP switch manufactured by TE Connectivity ALCOSWITCH Switches. This component is a single-pole, single-throw (SPST) switch with 6 positions, rated for 25mA at 24VDC, featuring a slide actuator with gold-plated copper alloy contacts. The GDS06S is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing design support and procurement continuity.

Substiute Parts

GDS06S

TE Connectivity ALCOSWITCH SwitchesIn Stock: 5177GDS06S Datasheet

Current PartRFQ

1-1825006-1

TE Connectivity ALCOSWITCH SwitchesIn Stock: 131681-1825006-1 Datasheet

DirectRFQ

209-6LPST

CTS ElectrocomponentsIn Stock: 1498209-6LPST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the GDS06S is determined by strict equivalence across the following critical parameters: circuit configuration (SPST), number of positions (6), current rating (25mA minimum), voltage rating (24VDC minimum), actuator type (slide standard), and contact material/finish specifications. Mounting type and termination style are secondary considerations that may vary based on application requirements.

The substitute parts identified for the GDS06S are grouped into two categories:

Direct Equivalent (1-1825006-1): This part maintains identical electrical specifications, physical dimensions, actuator characteristics, and contact properties. The primary distinction is product status (active versus obsolete) and RoHS compliance (ROHS3 compliant versus non-compliant).

Functional Equivalent with Parameter Variance (209-6LPST): This part satisfies the core SPST 6-position circuit requirement and exceeds the current and voltage ratings of the original part. However, it introduces differences in mounting type (through hole versus surface mount), termination style (PC pin versus gull wing), and height above board. This part is suitable only for applications where mounting type flexibility exists.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Pin-Compatible, Form-Fit-Function):

The part number 1-1825006-1 is the primary substitute for the GDS06S. This part is manufactured by the same supplier (TE Connectivity ALCOSWITCH) and maintains identical electrical ratings, physical dimensions, and mechanical characteristics. The 1-1825006-1 is currently in active production status with 13,107 units in stock, ensuring long-term availability. This part achieves ROHS3 compliance, addressing regulatory requirements that the obsolete GDS06S does not meet. Selection of 1-1825006-1 requires no circuit redesign or PCB modification.

For Functional Substitution (Design Modification Required):

The part number 209-6LPST from CTS Electrocomponents provides functional equivalence for applications where mounting type flexibility exists. This part exceeds the current rating specification (100mA versus 25mA) and provides extended electrical life (2,000 cycles versus 1,000 cycles). However, the 209-6LPST introduces the following design considerations: through-hole mounting versus surface mount, PC pin termination versus gull wing, increased height above board (0.180" versus 0.114"), and voltage rating of 20VDC (versus 24VDC). The 209-6LPST is suitable only for applications where the PCB layout accommodates through-hole mounting and where the 20VDC rating meets system requirements. This part also achieves ROHS3 compliance and is currently in active production with 1,477 units in stock.

Frequently Asked Questions (FAQ)

Q: Can the 1-1825006-1 be used as a direct replacement for the GDS06S without PCB modification?

A: Yes. The 1-1825006-1 maintains identical pitch (0.100"), height above board (0.114"), termination style (gull wing), and electrical specifications (25mA, 24VDC, SPST, 6 positions). No PCB layout changes are required.

Q: What is the primary difference between the GDS06S and 1-1825006-1?

A: The GDS06S is obsolete and RoHS non-compliant. The 1-1825006-1 is in active production and ROHS3 compliant. All electrical and mechanical parameters are identical.

Q: Can the 209-6LPST replace the GDS06S in a surface mount application?

A: No. The 209-6LPST is a through-hole component with PC pin termination, whereas the GDS06S is surface mount with gull wing termination. PCB redesign is required for this substitution.

Q: Does the 209-6LPST meet the voltage requirements of the GDS06S?

A: The 209-6LPST is rated for 20VDC, while the GDS06S is rated for 24VDC. The 209-6LPST does not meet the original voltage specification and is suitable only for applications operating at 20VDC or lower.

Q: What is the current rating difference between the GDS06S and 209-6LPST?

A: The GDS06S is rated for 25mA, while the 209-6LPST is rated for 100mA. The 209-6LPST exceeds the current handling capability of the original part.

Q: Are both substitute parts RoHS compliant?

A: Yes. Both 1-1825006-1 and 209-6LPST are ROHS3 compliant. The original GDS06S is RoHS non-compliant.

Q: What is the packaging difference between the GDS06S and its substitutes?

A: The GDS06S is packaged in tape seal format. Both 1-1825006-1 and 209-6LPST are supplied in tube packaging.

Q: Which substitute part should be selected for new designs?

A: The 1-1825006-1 is the recommended selection for new designs requiring direct compatibility with the GDS06S footprint and specifications. This part is in active production, ROHS3 compliant, and requires no design modification.