G5V-2-FDDC12 Equivalent & Substitute Parts

Part Overview

The G5V-2-FDDC12 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div. It is a DPDT (2 Form C) configuration relay rated for 2A at 12VDC, designed for through-hole mounting applications. The part is currently active in production with 800 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement in circuit applications without modification to PCB layout or electrical connections.

Substiute Parts

G5V-2-FDDC12

Omron Electronics Inc-EMC DivIn Stock: 900G5V-2-FDDC12 Datasheet

Current PartRFQ

G5V-2-DC12

Omron Electronics Inc-EMC DivIn Stock: 2092G5V-2-DC12 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the G5V-2-FDDC12 is determined by matching the following critical parameters:

• Coil voltage: 12VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 2 A minimum
• Switching voltage: 125VAC, 125VDC - Max or higher
• Coil current: 41.7 mA
• Coil resistance: 288 Ohms
• Mounting type: Through Hole
• Termination style: PC Pin
• Operating temperature range: -25°C ~ 65°C or wider
• Seal rating: Sealed - Fully

The G5V-2-DC12 meets all these criteria and is classified as a parametric equivalent. Differences in packaging format (tube vs. other formats) and MSL rating do not affect electrical or mechanical compatibility in this application category.

Parameter Comparison

Engineering Selection Recommendations

Both the G5V-2-FDDC12 and G5V-2-DC12 are active production parts from Omron Electronics Inc-EMC Div with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability: G5V-2-DC12 has higher stock (2040 pcs vs. 800 pcs)
• Packaging format: G5V-2-FDDC12 uses standard packaging; G5V-2-DC12 is supplied in tube packaging
• Compliance requirements: Both are RoHS compliant; G5V-2-DC12 carries ROHS3 designation and REACH Unaffected status
• MSL rating: G5V-2-DC12 has MSL 1 (Unlimited) vs. G5V-2-FDDC12 (Not Applicable)

For applications requiring ROHS3 compliance or extended moisture sensitivity specifications, G5V-2-DC12 is the preferred selection. For standard applications, either part provides equivalent performance.

Frequently Asked Questions (FAQ)

Q: Can G5V-2-DC12 be used as a direct replacement for G5V-2-FDDC12?

A: Yes. Both parts share identical electrical parameters (12VDC coil, 2A DPDT contact rating, 41.7 mA coil current, 288 Ohms coil resistance) and mechanical specifications (through-hole mounting, PC pin termination, sealed construction). No circuit modifications are required.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging format and compliance certifications. G5V-2-DC12 is supplied in tube packaging and carries ROHS3 compliance with MSL 1 rating, while G5V-2-FDDC12 uses standard packaging. Electrical and mechanical performance are identical.

Q: Are there any timing differences between these relays?

A: No. Both parts have identical operate time (7 ms) and release time (3 ms), as well as matching must-operate voltage (9 VDC) and must-release voltage (0.6 VDC) specifications.

Q: Which part should be selected for new designs?

A: Selection depends on specific requirements. For ROHS3 compliance or applications with moisture sensitivity concerns, use G5V-2-DC12. For standard applications where packaging format is not a constraint, either part is suitable. Verify packaging requirements for your assembly process.

Q: Do these relays have the same contact material?

A: Yes. Both relays use Silver (Ag) and Gold (Au) contact material, providing identical electrical contact characteristics and switching performance.