G5LE-14-ASI DC3 Equivalent & Substitute Parts

Part Overview

The G5LE-14-ASI DC3 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div. This SPDT (1 Form C) relay operates on a 3VDC coil and is rated for 10A switching capacity at 250VAC or 125VDC maximum. The part is actively produced and widely stocked, with 667 units available in new original condition. Finding equivalent or substitute parts may be necessary due to supply constraints, packaging requirements, or inventory optimization in production environments.

Substiute Parts

G5LE-14-ASI DC3

Omron Electronics Inc-EMC DivIn Stock: 760G5LE-14-ASI DC3 Datasheet

Current PartRFQ

G5LE-14 DC3

Omron Electronics Inc-EMC DivIn Stock: 9070G5LE-14 DC3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the G5LE-14-ASI DC3 is determined by strict equivalence across the following critical parameters:

• Coil voltage: 3VDC
• Contact form: SPDT (1 Form C)
• Contact rating: 10 A
• Switching voltage: 250VAC, 125VDC - Max
• Coil current: 133 mA
• Coil type: Non Latching
• Mounting type: Through Hole
• Termination style: PC Pin
• Operating temperature range: -25°C ~ 85°C
• Contact material: Silver Tin Oxide (AgSnO)
• Coil resistance: 22.5 Ohms

The identified substitute part G5LE-14 DC3 maintains identical electrical and mechanical specifications across all critical parameters. The primary difference is packaging configuration (Tray versus individual packaging) and inventory availability. Both parts belong to the same G5LE series and share the same base product number G5LE-14.

Parameter Comparison

Engineering Selection Recommendations

Both the G5LE-14-ASI DC3 and G5LE-14 DC3 are active products from Omron Electronics Inc-EMC Div with full RoHS compliance. The G5LE-14 DC3 offers significantly higher inventory availability (8984 units versus 667 units) and carries ROHS3 compliance certification, indicating alignment with the most current regulatory standards. Selection between these parts should be based on packaging requirements and supply chain considerations. The G5LE-14 DC3 in Tray packaging is suitable for high-volume production environments, while the G5LE-14-ASI DC3 may be preferred for lower-volume or prototype applications requiring individual unit packaging.

Frequently Asked Questions (FAQ)

Q: Can G5LE-14 DC3 be used as a direct replacement for G5LE-14-ASI DC3?

A: Yes. Both parts are electrically and mechanically identical across all critical parameters including coil voltage, contact form, current rating, switching voltage, and operating temperature range. The primary difference is packaging configuration.

Q: What is the difference between the two part numbers?

A: The G5LE-14-ASI DC3 is supplied in individual packaging, while the G5LE-14 DC3 is supplied in Tray packaging. Both parts are from the same G5LE series with identical base product number G5LE-14 and share the same electrical specifications.

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS compliant. The G5LE-14 DC3 carries ROHS3 certification, representing the latest regulatory compliance standard. The G5LE-14-ASI DC3 meets RoHS requirements. Both parts are EAR99 classified and REACH Unaffected.

Q: Which part should be selected for high-volume production?

A: The G5LE-14 DC3 in Tray packaging is optimized for high-volume production due to its bulk packaging format and significantly higher inventory availability (8984 units).

Q: Are the pin configurations identical?

A: Yes. Both parts use PC Pin termination style and Through Hole mounting, ensuring identical PCB footprint and assembly compatibility.

Q: What is the coil resistance specification?

A: Both parts have a coil resistance of 22.5 Ohms at 3VDC, with a coil current of 133 mA and must-operate voltage of 2.25 VDC.