G2R-24-ASI-DC5 Equivalent & Substitute Parts

Part Overview

The G2R-24-ASI-DC5 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div. This DPDT (2 Form C) relay operates on a 5VDC coil with a 4A contact rating and is designed for through-hole mounting applications. The part is currently active in production with 837 units in stock. Alternative models become necessary when specific packaging requirements, inventory availability, or supply chain considerations require substitution while maintaining identical electrical and mechanical performance.

Substiute Parts

G2R-24-ASI-DC5

Omron Electronics Inc-EMC DivIn Stock: 932G2R-24-ASI-DC5 Datasheet

Current PartRFQ

G2R-24-DC5

Omron Electronics Inc-EMC DivIn Stock: 2073G2R-24-DC5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The G2R-24-DC5 qualifies as a parametric equivalent to the G2R-24-ASI-DC5 based on strict alignment of all critical electrical and mechanical parameters. Substitution is valid when the following parameters match identically:

• Coil voltage: 5VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 4 A
• Coil current: 106 mA
• Coil resistance: 47 Ohms
• Mounting type: Through Hole
• Termination style: PC Pin
• Operating temperature range: -40°C ~ 70°C
• Contact material: Silver Alloy
• Seal rating: Sealed - Fully
• Coil type: Non Latching
• Switching voltage: 380VAC, 125VDC - Max
• Must operate voltage: 4.6 VDC
• Must release voltage: 0.75 VDC
• Operate time: 15 ms
• Release time: 5 ms

The primary difference between these parts is packaging format (PC Pin vs. Tray) and inventory availability, which do not affect electrical or mechanical performance in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

Both the G2R-24-ASI-DC5 and G2R-24-DC5 are active production parts from Omron Electronics Inc-EMC Div with identical electrical specifications and performance characteristics. Selection between these parts should be based on:

• Packaging requirements: The G2R-24-ASI-DC5 is supplied in PC Pin packaging, while the G2R-24-DC5 is supplied in Tray packaging. Verify your assembly process compatibility with the required packaging format.
• Inventory availability: The G2R-24-DC5 has higher stock availability (2056 units) compared to the G2R-24-ASI-DC5 (837 units), which may influence lead time considerations.
• Compliance requirements: Both parts meet RoHS compliance. The G2R-24-DC5 carries ROHS3 certification, while the G2R-24-ASI-DC5 carries RoHS Compliant status. Verify your application's specific compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can G2R-24-DC5 be used as a direct replacement for G2R-24-ASI-DC5?

A: Yes. Both parts are electrically and mechanically identical. The only differences are packaging format and inventory levels. Confirm that your assembly process accepts Tray packaging if substituting the G2R-24-DC5.

Q: What parameters must remain identical for substitution?

A: All electrical parameters must match exactly: coil voltage (5VDC), contact form (DPDT), current rating (4A), coil current (106 mA), coil resistance (47 Ohms), operating temperature range (-40°C ~ 70°C), and all timing specifications (operate time 15 ms, release time 5 ms). Mechanical parameters including mounting type (Through Hole) and termination style (PC Pin) must also remain identical.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (PC Pin vs. Tray) is a supply and handling consideration only. It does not affect the relay's electrical characteristics or performance in the circuit.

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS compliant. The G2R-24-DC5 carries ROHS3 certification while the G2R-24-ASI-DC5 carries standard RoHS Compliant status. Verify your application's specific regulatory requirements before substitution.

Q: What is the coil resistance and why is it important for substitution?

A: The coil resistance is 47 Ohms for both parts. This parameter is critical for substitution because it determines the coil current draw (106 mA at 5VDC) and must match exactly to ensure proper circuit operation and power supply compatibility.