FXLS8962AFR1 Equivalent & Substitute Parts

Part Overview

The FXLS8962AFR1 is a 3-axis accelerometer manufactured by NXP USA Inc., designed to measure acceleration across X, Y, and Z axes with selectable ranges of ±2g, ±4g, ±8g, and ±16g. The device is packaged in a 10-DFN (2x2) surface mount configuration. This part has reached obsolete product status, making identification of equivalent and substitute components necessary for ongoing design support and production continuity.

Substiute Parts

FXLS8962AFR1

NXP USA Inc.In Stock: 44999FXLS8962AFR1 Datasheet

Current PartRFQ

FXLS8964AFR3

NXP USA Inc.In Stock: 3495FXLS8964AFR3 Datasheet

DirectRFQ

FXLS8964AFR1

NXP USA Inc.In Stock: 809FXLS8964AFR1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the FXLS8962AFR1 is determined by the following critical parameters:

• Axis Configuration: Must support X, Y, Z measurement
• Acceleration Range: Must support ±2g, ±4g, ±8g, ±16g selectable ranges
• Package / Case: Must be 10-VFDFN (10-DFN 2x2)
• Mounting Type: Must be Surface Mount
• Manufacturer: NXP USA Inc.
• Compliance: RoHS3 compliance required

The substitute parts identified maintain electrical and mechanical compatibility with the original FXLS8962AFR1 while offering active product status and enhanced feature sets.

Parameter Comparison

Engineering Selection Recommendations

FXLS8964AFR1 is the manufacturer-recommended substitute for the obsolete FXLS8962AFR1. This part maintains identical mechanical and electrical compatibility while offering active product status. The FXLS8964AFR1 carries MSL 1 (Unlimited) moisture sensitivity, matching the original part specification. Both FXLS8964AFR1 and FXLS8964AFR3 are qualified to AEC-Q100 automotive standards and maintain ROHS3 compliance.

The primary distinction between FXLS8964AFR1 and FXLS8964AFR3 is the moisture sensitivity level: FXLS8964AFR1 specifies MSL 1 (Unlimited), while FXLS8964AFR3 specifies MSL 3 (168 Hours). Selection between these variants depends on storage and handling requirements within your supply chain and manufacturing environment.

Frequently Asked Questions (FAQ)

Q: Can FXLS8964AFR3 be used as a direct replacement for FXLS8962AFR1?

A: FXLS8964AFR3 is electrically and mechanically compatible with FXLS8962AFR1, sharing identical axis configuration, acceleration range, package type, and mounting method. However, FXLS8964AFR3 carries MSL 3 (168 Hours) moisture sensitivity, compared to the original part's MSL 1 (Unlimited). This difference affects storage and handling protocols but does not impact functional performance in the application.

Q: What is the difference between FXLS8964AFR1 and FXLS8964AFR3?

A: Both parts are functionally identical with matching electrical specifications, axis configuration, acceleration ranges, and package types. The primary difference is moisture sensitivity level: FXLS8964AFR1 is MSL 1 (Unlimited), while FXLS8964AFR3 is MSL 3 (168 Hours). Selection should be based on your organization's moisture control capabilities and component storage environment.

Q: Are the substitute parts pin-compatible with FXLS8962AFR1?

A: Yes. Both FXLS8964AFR1 and FXLS8964AFR3 use the 10-VFDFN package (10-DFN 2x2) with surface mount configuration, ensuring mechanical and pin-level compatibility with the original FXLS8962AFR1.

Q: Do the substitute parts meet the same compliance standards?

A: Yes. Both FXLS8964AFR1 and FXLS8964AFR3 are ROHS3 compliant and REACH unaffected, matching the original part's compliance profile. Both are qualified to AEC-Q100 automotive standards.

Q: Why is FXLS8962AFR1 listed as obsolete?

A: The FXLS8962AFR1 has reached end-of-life status. NXP USA Inc. recommends transitioning to FXLS8964AFR1 for new designs and ongoing production support.