FL2D-80-332 Equivalent & Substitute Parts

Part Overview

The FL2D-80-332 is a common mode filter designed for power line applications. This 2-line common mode choke operates at 8A maximum current with a 3.3 mH inductance at 1 kHz and features a typical DC resistance of 30 mOhm. The component is manufactured by Mornsun America, LLC and maintains Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align within the allowed specifications for this product category, enabling component selection flexibility while maintaining circuit performance requirements.

Substiute Parts

FL2D-80-332

Mornsun America, LLCIn Stock: 1138FL2D-80-332 Datasheet

Current PartRFQ

FL2D-80-102

Mornsun America, LLCIn Stock: 879FL2D-80-102 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FL2D-80-332 are identified based on strict alignment of electrical and mechanical parameters within the FL2D-80-xxx series. The substitution criteria are:

• Same manufacturer (Mornsun America, LLC)
• Same filter type (Power Line)
• Same number of lines (2)
• Same current rating (8A maximum)
• Same DC resistance specification (30 mOhm typical)
• Same voltage ratings (2000V DC / 1500V AC)
• Same operating temperature range (-40°C ~ 125°C)
• Same mounting type (Through Hole)
• Same physical dimensions and package configuration (Vertical, 4 PC Pin)
• Same RoHS3 compliance status
• Same MSL rating (1 - Unlimited)
• Active product status

The FL2D-80-102 meets all these criteria. The primary difference is the inductance value at 1 kHz: FL2D-80-102 provides 1 mH compared to the 3.3 mH of the FL2D-80-332. This inductance variation represents a different filtering characteristic within the same product family and does not affect the mechanical or electrical compatibility parameters that govern substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

Both FL2D-80-332 and FL2D-80-102 maintain Active product status and carry full RoHS3 compliance certification. Component selection between these parts should be based on the specific inductance requirement of the application circuit. The FL2D-80-332 with 3.3 mH inductance and the FL2D-80-102 with 1 mH inductance are mechanically and electrically interchangeable within the constraints of the circuit design. Both components share identical current ratings, voltage specifications, temperature operating range, and physical package configuration, ensuring PCB layout compatibility and thermal management characteristics remain consistent across substitution.

Frequently Asked Questions (FAQ)

Q: Can FL2D-80-102 be used as a direct replacement for FL2D-80-332?

A: FL2D-80-102 is mechanically and electrically compatible with FL2D-80-332 in terms of mounting, current handling, voltage ratings, and temperature performance. The inductance value differs (1 mH versus 3.3 mH at 1 kHz), which affects the filtering characteristic. Component selection must align with the circuit's inductance requirement.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both FL2D-80-332 and FL2D-80-102 share identical dimensions of 0.906" L x 0.520" W (23.00mm x 13.20mm) with a maximum height of 0.906" (23.00mm). Both use Vertical, 4 PC Pin package configuration, ensuring identical PCB footprint and mounting compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes. Both FL2D-80-332 and FL2D-80-102 are RoHS3 compliant with MSL rating of 1 (Unlimited). Both maintain Active product status from Mornsun America, LLC.

Q: What is the current handling capacity for both parts?

A: Both FL2D-80-332 and FL2D-80-102 are rated for a maximum current of 8A with identical DC resistance of 30 mOhm (typical).

Q: Are the voltage ratings the same?

A: Yes. Both parts are rated for 2000V DC and 1500V AC, with identical operating temperature range of -40°C to 125°C.