FHG.0B.306.CLAD52Z Equivalent & Substitute Parts

Part Overview

The FHG.0B.306.CLAD52Z is a 6-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector features a push-pull fastening mechanism, shielded design, and gold-plated mating contacts suitable for applications requiring reliable circular connector interfaces. The product is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and component procurement.

Substiute Parts

FHG.0B.306.CLAD52Z

LEMOIn Stock: 1204FHG.0B.306.CLAD52Z Datasheet

Current PartRFQ

W20L0C-P06MCC0-520S

ODUIn Stock: 1254W20L0C-P06MCC0-520S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FHG.0B.306.CLAD52Z is determined by the following critical parameters:

• Connector Type & Position Count: Must be plug configuration with 6 male pins
• Termination Method: Solder cup termination required for direct PCB integration
• Fastening Mechanism: Push-pull fastening type for consistent mating interface
• Mounting Configuration: Free hanging (in-line) or right angle orientation
• Contact Material & Finish: Gold-plated mating contacts for corrosion resistance
• Ingress Protection: IP50 minimum dust protection rating
• Compliance: ROHS3 compliance and EAR99 classification

The substitute part W20L0C-P06MCC0-520S from ODU meets these core substitution criteria as a 6-position circular connector plug with male pins, solder cup termination, push-pull fastening, and gold-plated contacts. Both parts maintain equivalent functional interfaces for connector mating and electrical continuity.

Parameter Comparison

Engineering Selection Recommendations

The W20L0C-P06MCC0-520S qualifies as a functional substitute based on matching core connector specifications: 6-position male pin plug, solder cup termination, push-pull fastening, and gold-plated contacts. Both parts maintain ROHS3 compliance and EAR99 classification, supporting equivalent regulatory requirements.

The substitute part carries active product status, ensuring ongoing availability and supply chain continuity compared to the obsolete FHG.0B.306.CLAD52Z. This transition addresses component lifecycle management while preserving connector interface compatibility.

Differences in operating temperature range (-40°C ~ 120°C versus -55°C ~ 250°C) and shielding configuration (unshielded versus shielded) require evaluation against specific application requirements. The substitute part provides higher current capacity (4A versus 2.5A), which does not constrain compatibility in applications designed for the original 2.5A rating.

Frequently Asked Questions (FAQ)

Q: Can W20L0C-P06MCC0-520S directly replace FHG.0B.306.CLAD52Z in existing designs?

A: Direct mechanical and electrical interface compatibility is supported. Both connectors feature 6-position male pin plugs with solder cup termination and push-pull fastening. Verify application-specific requirements for operating temperature range and shielding characteristics before implementation.

Q: What are the key differences between these two connector models?

A: The primary differences are operating temperature range (FHG.0B.306.CLAD52Z: -55°C ~ 250°C; W20L0C-P06MCC0-520S: -40°C ~ 120°C), shielding configuration (shielded versus unshielded), and current capacity (2.5A versus 4A). The substitute part is currently in active production status.

Q: Are both connectors compliant with the same regulatory standards?

A: Both parts are ROHS3 compliant and classified as EAR99 for export control purposes. Compliance certifications are equivalent for standard industrial and commercial applications.

Q: What is the cable opening specification for each connector?

A: FHG.0B.306.CLAD52Z accepts cable diameters of 0.165" ~ 0.205" (4.20mm ~ 5.20mm). W20L0C-P06MCC0-520S accepts 0.157" ~ 0.205" (4.00mm ~ 5.20mm). Both ranges support standard cable gauges used in circular connector applications.

Q: Does the unshielded design of the substitute part affect electromagnetic compatibility?

A: The W20L0C-P06MCC0-520S is unshielded, whereas the FHG.0B.306.CLAD52Z is shielded. Applications requiring electromagnetic shielding must evaluate this difference against system-level EMI/RFI requirements.