FFAM0252*2 Equivalent & Substitute Parts

Part Overview

The FFAM0252*2 is an RF EMI flexible ferrite sheet manufactured by API Delevan Inc., designed for electromagnetic interference suppression applications. This component features a square geometry with dimensions of 7.874" (200.00mm) × 7.874" (200.00mm) × 0.010" (0.25mm) thickness, utilizing ferrite powder material for RF shielding and EMI attenuation.

The FFAM0252*2 carries an Obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production or field service requirements for systems utilizing this ferrite sheet specification.

Substiute Parts

FFAM0252*2

API Delevan Inc.In Stock: 1039FFAM0252*2 Datasheet

Current PartRFQ

FFAM0252*2T1

API Delevan Inc.In Stock: 1079FFAM0252*2T1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FFAM0252*2 is determined by strict equivalence across the following critical parameters:

Dimensional Specifications: Length, width, and thickness must match exactly (7.874" × 7.874" × 0.010")

Material Composition: Ferrite powder material type must be maintained

Electrical Performance Range: Operating temperature range of -40°C to 85°C must be supported

Compliance Requirements: RoHS3 compliance and REACH unaffected status must be maintained

Series Compatibility: Parts must belong to the FFAM series from API Delevan Inc.

The FFAM0252*2T1 qualifies as a direct substitute based on full alignment with these parameters. The primary distinction is the addition of non-conductive, single-sided adhesive in the substitute part, which represents an enhancement rather than a deviation from the core electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The FFAM02522T1 is the designated substitute for the obsolete FFAM02522. Both parts maintain identical dimensional, material, and thermal specifications, ensuring mechanical and electrical compatibility within existing designs.

The FFAM02522T1 carries Active product status, providing assured long-term availability and supply chain continuity compared to the Obsolete FFAM02522. Both parts satisfy ROHS3 compliance and REACH unaffected requirements, maintaining regulatory alignment for applications subject to these standards.

The addition of non-conductive, single-sided adhesive in the FFAM0252*2T1 does not alter core ferrite sheet performance characteristics and may provide installation convenience in applications requiring mechanical retention.

Frequently Asked Questions (FAQ)

Q: Can FFAM02522T1 be used as a direct replacement for FFAM02522?

A: Yes. Both parts share identical dimensions (7.874" × 7.874" × 0.010"), material composition (ferrite powder), and operating temperature range (-40°C to 85°C). The FFAM0252*2T1 includes non-conductive, single-sided adhesive, which does not compromise electrical or mechanical compatibility.

Q: What is the primary difference between FFAM02522 and FFAM02522T1?

A: The FFAM02522T1 includes non-conductive, single-sided adhesive backing, whereas the FFAM02522 does not specify adhesive properties. This addition facilitates mechanical positioning without affecting RF or EMI performance.

Q: Why is FFAM0252*2 listed as Obsolete?

A: Obsolete status indicates the part is no longer in active production. The FFAM0252*2T1 serves as the current production equivalent, offering the same core specifications with enhanced availability.

Q: Are there packaging differences between these parts?

A: The FFAM02522 packaging is listed as unspecified, while FFAM02522T1 is supplied in Bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both FFAM02522 and FFAM02522T1 are ROHS3 compliant and REACH unaffected, maintaining regulatory compliance for equivalent applications.