FDA000017 100 MHz CMOS Oscillator Equivalent & Substitute Parts

Part Overview

The FDA000017 is a 100 MHz XO (Standard) CMOS oscillator manufactured by Diodes Incorporated, designed for applications requiring precision frequency generation with enable/disable functionality. This Surface Mount Device (SMD) operates at 3.3V supply voltage and is housed in a compact 4-SMD, No Lead package measuring 5.00mm x 3.20mm. The part is Active status and ROHS3 compliant, making it suitable for modern electronic assemblies. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required for procurement flexibility, inventory management, or supply chain continuity.

Substiute Parts

FDA000017

Diodes IncorporatedIn Stock: 849FDA000017 Datasheet

Current PartRFQ

SXO53C3A271-100.000M

Suntsu Electronics, Inc.In Stock: 3710SXO53C3A271-100.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FDA000017 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

• Frequency Match: 100 MHz (exact match required)
• Output Configuration: CMOS output type
• Supply Voltage: 3.3V operation
• Enable/Disable Function: Required control capability
• Frequency Stability: ±50ppm tolerance
• Operating Temperature Range: -20°C ~ 70°C minimum coverage
• Package Type: 4-SMD, No Lead form factor
• Package Dimensions: 5.00mm x 3.20mm footprint compatibility
• Compliance: ROHS3 compliant status

The SXO53C3A271-100.000M from Suntsu Electronics, Inc. meets all specified electrical and mechanical parameters, qualifying it as a direct substitute for the FDA000017 in applications where these criteria are required.

Parameter Comparison

Engineering Selection Recommendations

Both the FDA000017 and SXO53C3A271-100.000M are Active status products with ROHS3 compliance and REACH Unaffected designation, meeting current environmental and regulatory requirements. Selection between these parts should be based on:

• Procurement Availability: FDA000017 has 782 units in stock; SXO53C3A271-100.000M has 3671 units available
• Supply Chain Requirements: Choose based on lead time and inventory needs
• Regulatory Compliance: Both parts satisfy ROHS3 and EAR99 export control classifications
• Physical Constraints: Maximum seated height differs by 0.10mm (1.30mm vs 1.40mm); verify clearance in space-constrained applications
• Power Budget: Maximum supply current differs by 5mA (45mA vs 50mA); verify power supply capacity in current-limited designs

Frequently Asked Questions (FAQ)

Q: Can the SXO53C3A271-100.000M replace the FDA000017 in existing designs?

A: Yes, provided the application accommodates the 0.10mm height difference and 5mA additional current draw. All electrical specifications, frequency output, and package footprint are equivalent.

Q: Are there any differences in the enable/disable function between these parts?

A: Both parts provide enable/disable functionality at 3.3V. No functional differences are specified in the provided parameters.

Q: What is the significance of the frequency stability specification?

A: The ±50ppm frequency stability applies to both parts and defines the maximum deviation from the 100 MHz nominal frequency across the operating temperature range and supply voltage variations.

Q: Do both parts have the same moisture sensitivity requirements?

A: The FDA000017 specifies MSL 1 (Unlimited). The SXO53C3A271-100.000M moisture sensitivity level is not provided in the available data. Verify MSL requirements with the manufacturer if moisture exposure is a concern.

Q: Are there any supply current differences during disabled operation?

A: The FDA000017 specifies 10µA maximum supply current in disable mode. The SXO53C3A271-100.000M disable current specification is not provided. Verify this parameter if low-power standby operation is critical.

Q: What is the package footprint compatibility?

A: Both parts use identical 4-SMD, No Lead packages with 5.00mm x 3.20mm footprints, ensuring direct PCB layout compatibility without redesign.