FCE17E09SC280 Equivalent & Substitute Parts

Part Overview

The FCE17E09SC280 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a DE/E shell size (1) and is designed for signal applications. The connector is actively produced and RoHS compliant, making it suitable for modern electronic assemblies requiring D-Sub connectivity. Equivalent and substitute parts are identified based on matching connector topology, electrical ratings, mechanical dimensions, and termination methods to ensure functional interchangeability in circuit board applications.

Substiute Parts

FCE17E09SC280

Amphenol ICC (Commercial Products)In Stock: 1133FCE17E09SC280 Datasheet

Current PartRFQ

5745988-6

TE Connectivity AMP ConnectorsIn Stock: 15755745988-6 Datasheet

SimilarRFQ

5747836-6

TE Connectivity AMP ConnectorsIn Stock: 11865747836-6 Datasheet

SimilarRFQ

626-009-262-032

Mercury United Electronics, Inc.In Stock: 846626-009-262-032 Datasheet

SimilarRFQ

626-009-662-032

Mercury United Electronics, Inc.In Stock: 923626-009-662-032 Datasheet

SimilarRFQ

747836-6

TE Connectivity AMP ConnectorsIn Stock: 1095747836-6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FCE17E09SC280 is determined by the following critical parameters:

Primary Matching Criteria:

• Connector style: D-Sub
• Connector type: Receptacle, Female Sockets
• Number of positions: 9
• Number of rows: 2
• Shell size and layout: 1 (DE, E)
• Mounting type: Through Hole, Right Angle
• Termination method: Solder
• Material flammability rating: UL94 V-0

Secondary Compatibility Factors:

• Backset spacing tolerance (0.590" ± acceptable variance)
• Contact finish: Gold plated
• Shell material: Steel with plating (tin or nickel acceptable)
• Operating temperature range (must encompass or exceed -40°C ~ 85°C)
• Current rating: 5A minimum

All identified substitute parts meet these primary criteria. Variations in contact finish thickness, voltage rating, flange features, and packaging format do not affect functional interchangeability in standard D-Sub receptacle applications.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity AMPLIMITE HD-20 Series (5745988-6, 5747836-6, 747836-6):

These three TE Connectivity parts provide direct functional equivalence to the FCE17E09SC280. All three maintain the 9-position, 2-row D-Sub receptacle configuration with through-hole, right-angle solder termination. The TE Connectivity substitutes offer enhanced current ratings (6A versus 5A) and extended operating temperature ranges (-55°C ~ 105°C versus -40°C ~ 85°C), providing superior performance margins in demanding applications. Parts 5747836-6 and 747836-6 include board lock features matching the original design. RoHS compliance is confirmed for 5745988-6 (ROHS3) and 5747836-6 (RoHS Compliant). Part 747836-6 carries REACH Affected status, requiring compliance verification for specific end-use applications.

Mercury United Electronics 626 Series (626-009-262-032, 626-009-662-032):

These Mercury connectors provide functional substitution with notable design variations. Both parts support board edge mounting in addition to through-hole mounting, offering layout flexibility. The Mercury parts feature nickel-plated steel shells and include shielding and mounting brackets. Current rating is specified at 3A per contact, which is lower than the original 5A rating. Backset spacing is 0.584" (14.84mm), representing a 0.15mm variance from the original 0.590" (14.99mm). Both Mercury parts are ROHS3 compliant and REACH Unaffected. These parts are suitable for applications where the lower current rating and minor dimensional variance are acceptable.

Selection Basis:

All substitute parts maintain active product status and UL94 V-0 flammability certification. Selection should prioritize TE Connectivity AMPLIMITE HD-20 series parts for applications requiring maximum performance headroom and established supply chain continuity. Mercury 626 series parts are appropriate where board edge mounting capability or shielding features provide specific design advantages and current requirements do not exceed 3A per contact.

Frequently Asked Questions (FAQ)

Q: Can the FCE17E09SC280 be directly replaced with TE Connectivity 5745988-6?

A: Yes. Both connectors share identical D-Sub receptacle topology, 9-position/2-row configuration, through-hole right-angle solder termination, and DE/E shell size. The 5745988-6 provides equivalent electrical and mechanical function with higher current capacity (6A versus 5A) and extended temperature range (-55°C ~ 105°C versus -40°C ~ 85°C).

Q: What is the significance of the backset spacing difference between Amphenol and Mercury parts?

A: Backset spacing defines the distance from the connector mounting surface to the contact plane. The Amphenol FCE17E09SC280 specifies 0.590" (14.99mm), while Mercury 626 series parts specify 0.584" (14.84mm). This 0.15mm variance may affect board layout clearances and mating connector alignment in tightly constrained designs. Verification against specific PCB layout requirements is necessary before substitution.

Q: Are the TE Connectivity AMPLIMITE HD-20 parts interchangeable with each other?

A: Parts 5745988-6, 5747836-6, and 747836-6 are functionally equivalent. Primary differences are packaging format (tray versus tube) and flange features. Parts 5747836-6 and 747836-6 include board lock features; 5745988-6 does not. All three maintain identical electrical ratings, shell dimensions, and solder termination. Selection depends on packaging requirements and whether board lock functionality is specified.

Q: What is the impact of contact finish thickness variation on connector performance?

A: The FCE17E09SC280 specifies 15.0µin (0.38µm) gold contact finish thickness. Substitute parts specify 30.0µin (0.76µm) or flash thickness. Gold plating thickness affects contact durability and mating cycle life. Thicker plating (30.0µin) provides enhanced wear resistance and is suitable for high-cycle mating applications. Flash plating is minimal and appropriate for low-cycle or static applications. Selection should align with expected mating frequency and contact wear requirements.

Q: Can Mercury 626 series parts be used in applications requiring 5A current capacity?

A: No. Mercury 626-009-262-032 and 626-009-662-032 are rated at 3A per contact, which is below the original 5A specification. These parts are suitable only for applications where maximum current per contact does not exceed 3A. For applications requiring 5A or higher current capacity, TE Connectivity AMPLIMITE HD-20 series (6A rating) or equivalent higher-rated alternatives must be selected.

Q: What compliance certifications should be verified before substitution?

A: All identified substitute parts maintain UL94 V-0 flammability certification and active product status. RoHS compliance is confirmed for all parts (RoHS Compliant or ROHS3). REACH status varies: TE Connectivity 5745988-6 and 5747836-6 are REACH Unaffected or Vendor Undefined; 747836-6 is REACH Affected; Mercury parts are REACH Unaffected. Applications subject to REACH regulations must confirm compliance status of the selected substitute before procurement.

Q: Does packaging format affect connector functionality?

A: No. Packaging format (tube, tray, or bulk) affects logistics, storage, and handling but does not alter electrical or mechanical connector function. Selection of packaging format should be based on assembly process requirements, inventory management practices, and supply chain preferences rather than technical performance criteria.