FCC17E09PC69B D-Sub 9-Position Right Angle Solder Plug Connector

Part Overview

The FCC17E09PC69B is a 9-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle through-hole solder termination. This connector features a male pin configuration with shell size 1 (DE, E) layout and board-side M3 flange mounting. The part is classified as obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements. Substitute parts must maintain electrical and mechanical compatibility while meeting current RoHS compliance standards where applicable.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Material Flammability Rating	UL94 V-0
Backset Spacing	0.590" (14.99mm)
Features	Filter, Grounding Indents, Mounting Brackets
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
Flange Feature	Board Side (M3)
Contact Type	Signal
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the FCC17E09PC69B are grouped based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

Critical Parameters for Substitution:

Connector style (D-Sub)
Connector type (Plug, Male Pins)
Number of positions (9)
Number of rows (2)
Shell size and layout (1 / DE, E)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Current rating (5A minimum)
Operating temperature range (-40°C ~ 85°C minimum)
Material flammability rating (UL94 V-0)
Backset spacing (0.590" / 14.99mm)

Amphenol ICC FCE17 Series Equivalents: Parts FCE17E09PC69B, FCE17E09PC60B, FCE17E09PC61B, FCE17E09PC64B, FCE17E09PC65B, FCE17E09PC68B, FCE17E09PC6DB, and FCE17E09PC6EB are parametric equivalents from the active FCE17 series. These parts maintain identical mechanical and electrical specifications to the FCC17E09PC69B while offering RoHS compliance and active product status.

HARTING Cross-Manufacturer Alternatives: Parts 09651626815 and 09651626816 from HARTING provide functional equivalence with D-Sub 9-position right-angle solder plug configuration. These alternatives feature higher current ratings (6.5A) and extended operating temperature range (-55°C ~ 125°C), with different backset spacing (0.409" / 10.40mm) and flange mounting configurations.

Parameter Comparison

Parameter	FCC17E09PC69B	FCE17E09PC69B	FCE17E09PC60B	FCE17E09PC61B	FCE17E09PC64B	FCE17E09PC65B	FCE17E09PC68B	FCE17E09PC6DB	FCE17E09PC6EB	09651626815	09651626816
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Style	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub	D-Sub
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not specified	Not specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not specified	Not specified
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Dielectric Material	Thermoplastic	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Flange Feature	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Housing/Shell (M3)	Housing/Shell (4-40)
Contact Type	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (Recommended Primary Substitutes):

The FCE17E09PC69B, FCE17E09PC60B, FCE17E09PC61B, FCE17E09PC64B, FCE17E09PC65B, FCE17E09PC68B, FCE17E09PC6DB, and FCE17E09PC6EB connectors are direct functional replacements for the obsolete FCC17E09PC69B. All FCE17 series parts maintain identical mechanical and electrical specifications including 9-position configuration, right-angle through-hole solder termination, 5A current rating, UL94 V-0 flammability rating, and -40°C to 85°C operating temperature range. The primary advantage of FCE17 series substitutes is active product status with RoHS compliance, eliminating supply chain obsolescence risk and meeting current regulatory requirements. These parts are manufactured by the same supplier (Amphenol ICC) and are available in quantities ranging from 704 to 1,085 pieces.

HARTING Cross-Manufacturer Alternatives (Secondary Options):

Parts 09651626815 and 09651626816 from HARTING provide functional D-Sub 9-position right-angle solder plug alternatives with enhanced electrical performance (6.5A current rating) and extended operating temperature range (-55°C to 125°C). These alternatives feature ROHS3 compliance and active product status. However, HARTING parts differ in backset spacing (0.409" versus 0.590"), flange mounting configuration (Housing/Shell versus Board Side), and contact material composition (Copper Alloy versus Phosphor Bronze). These dimensional and material differences require PCB layout verification before implementation.

Compliance Considerations:

For applications requiring RoHS compliance, all FCE17 series alternatives and HARTING parts satisfy current regulatory standards. The original FCC17E09PC69B is RoHS non-compliant and should be replaced in new designs. FCE17 series parts offer the most direct compliance path with identical form factor and mounting characteristics.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09PC69B directly replace FCC17E09PC69B without PCB modifications?

A: Yes. The FCE17E09PC69B maintains identical mechanical specifications including shell size (1 / DE, E), backset spacing (0.590" / 14.99mm), board-side M3 flange mounting, and through-hole right-angle solder termination. No PCB layout changes are required.

Q: What is the difference between the various FCE17 part numbers (PC60B, PC61B, PC64B, PC65B, PC68B, PC6DB, PC6EB)?

A: The FCE17 series variants differ in internal contact or shell configuration specifications not detailed in the provided parameters. All variants maintain identical external mechanical dimensions, electrical ratings (5A, -40°C to 85°C), and mounting characteristics. Selection among FCE17 variants should be based on specific application requirements and internal contact configuration needs.

Q: Are HARTING 09651626815 and 09651626816 direct replacements?

A: HARTING parts provide functional equivalence as 9-position D-Sub right-angle solder plugs but differ in critical dimensions. Backset spacing is 0.409" (10.40mm) compared to 0.590" (14.99mm) for Amphenol parts, requiring PCB layout verification. Flange mounting differs (Housing/Shell versus Board Side), and contact material is Copper Alloy rather than Phosphor Bronze. These differences necessitate design review before substitution.

Q: What is the inventory status for substitute parts?

A: FCE17E09PC68B has the highest inventory at 1,085 pieces. Other FCE17 variants range from 704 to 1,042 pieces. HARTING 09651626815 has 829 pieces and 09651626816 has 911 pieces. All substitute parts are available in active production status.

Q: Does the FCC17E09PC69B meet current RoHS requirements?

A: No. The FCC17E09PC69B is RoHS non-compliant. All recommended FCE17 series substitutes are RoHS Compliant, and HARTING alternatives are ROHS3 Compliant, meeting current regulatory standards.

Q: What is the voltage rating for FCE17 series parts?

A: Voltage rating is not specified in the FCE17 series documentation. The original FCC17E09PC69B is rated at 200V. For applications requiring specific voltage ratings, contact the manufacturer for FCE17 series voltage specifications.

Q: Can I use HARTING parts in existing designs without testing?

A: HARTING parts require design verification due to dimensional differences in backset spacing and flange mounting configuration. PCB layout compatibility must be confirmed before implementation in production designs.

Q: What is the difference in operating temperature range between FCC17E09PC69B and HARTING alternatives?

A: FCC17E09PC69B and all FCE17 series parts operate from -40°C to 85°C. HARTING 09651626815 and 09651626816 extend the operating range to -55°C to 125°C, providing enhanced thermal performance for extreme environment applications.

Q: Are all substitute parts available in the same packaging as the original?

A: The original FCC17E09PC69B packaging is not specified. FCE17E09PC68B is packaged in boxes, while other FCE17 variants have unspecified packaging. HARTING 09651626815 is supplied in bulk packaging and 09651626816 in bag packaging. Packaging requirements should be confirmed with procurement specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message