FCC17C37PC4D0 Equivalent & Substitute Parts

Part Overview

The FCC17C37PC4D0 is a 37-position D-Sub plug connector with right-angle solder termination, manufactured by Amphenol ICC (Commercial Products). This connector features male pins, through-hole mounting, and is designed for signal applications with a 5A current rating and 200V voltage rating. The part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement requirements.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	37
Number of Rows	2
Shell Size, Connector Layout	4 (DC, C)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
Backset Spacing	0.590" (14.99mm)
Features	Board Lock, Filter, Grounding Indents
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17C37PC4D0 is determined by strict equivalence across the following critical parameters:

Primary Equivalence Criteria:

Connector style (D-Sub)
Connector type (Plug, Male Pins)
Number of positions (37)
Number of rows (2)
Shell size and layout (4 / DC, C)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Current rating (5A minimum)
Operating temperature range (-40°C ~ 85°C minimum)
Material flammability rating (UL94 V-0)

Substitute Categories:

Category 1: Direct Series Equivalents (Amphenol ICC FCE17 Series) Parts FCE17C37PC4D0, FCE17C37PC400, FCE17C37PC410, FCE17C37PC440, FCE17C37PC450, FCE17C37PC480, FCE17C37PC490, and FCE17C37PC4E0 are parametric equivalents from the active FCE17 series. These parts maintain identical mechanical and electrical specifications to the obsolete FCC17C37PC4D0 across all critical parameters. The primary distinction is product status (active versus obsolete) and RoHS compliance (compliant versus non-compliant).

Category 2: Cross-Manufacturer Alternatives (HARTING) Parts 09654226800 and 09654227800 from HARTING provide functional equivalence with variations in specific parameters. These connectors maintain the same connector style, type, position count, row configuration, shell size, mounting type, and termination method. Differences include backset spacing (0.409" versus 0.590"), current rating (6.5A versus 5A), contact form (stamped versus machined), and operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C).

Parameter Comparison

Part Number	Manufacturer	Product Status	Connector Type	Positions	Mounting	Termination	Current (A)	Voltage (V)	Operating Temp (°C)	Shell Material	Contact Finish	RoHS Status	Inventory (Pcs)
FCC17C37PC4D0	Amphenol ICC	Obsolete	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	200	-40 ~ 85	Steel, Tin Plated	Gold	Non-compliant	1141
FCE17C37PC4D0	Amphenol ICC	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	Not specified	-40 ~ 85	Steel, Tin Plated	Gold	Compliant	1111
FCE17C37PC400	Amphenol ICC	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	Not specified	-40 ~ 85	Steel, Tin Plated	Gold	Compliant	810
FCE17C37PC410	Amphenol ICC	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	Not specified	-40 ~ 85	Steel, Tin Plated	Gold	Compliant	858
FCE17C37PC440	Amphenol ICC	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	Not specified	-40 ~ 85	Steel, Tin Plated	Gold	Compliant	959
FCE17C37PC450	Amphenol ICC	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	Not specified	-40 ~ 85	Steel, Tin Plated	Gold	Compliant	855
FCE17C37PC480	Amphenol ICC	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	Not specified	-40 ~ 85	Steel, Tin Plated	Gold	Compliant	691
FCE17C37PC490	Amphenol ICC	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	Not specified	-40 ~ 85	Steel, Tin Plated	Gold	Compliant	998
FCE17C37PC4E0	Amphenol ICC	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	5	Not specified	-40 ~ 85	Steel, Tin Plated	Gold	Compliant	822
09654226800	HARTING	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	6.5	Not specified	-55 ~ 125	Steel	Not specified	ROHS3 Compliant	1047
09654227800	HARTING	Active	Plug, Male Pins	37	Through Hole, Right Angle	Solder	6.5	Not specified	-55 ~ 125	Steel	Not specified	ROHS3 Compliant	822

Engineering Selection Recommendations

For Direct Replacement (Amphenol ICC FCE17 Series):

The FCE17C37PC4D0, FCE17C37PC400, FCE17C37PC410, FCE17C37PC440, FCE17C37PC450, FCE17C37PC480, FCE17C37PC490, and FCE17C37PC4E0 connectors are parametric equivalents suitable for direct substitution of the obsolete FCC17C37PC4D0. All eight parts maintain identical mechanical and electrical specifications across connector style, type, position count, row configuration, shell size, mounting type, termination method, current rating, and operating temperature range. These parts are classified as active products with RoHS compliance, addressing the obsolescence status of the original component. Selection among these eight variants should be based on availability and specific design requirements related to dielectric material composition or contact form specifications.

For Cross-Manufacturer Alternatives (HARTING):

The HARTING parts 09654226800 and 09654227800 provide functional equivalence with enhanced electrical performance. These connectors support a higher current rating of 6.5A compared to the 5A rating of the FCC17C37PC4D0, and operate across an extended temperature range of -55°C to 125°C versus -40°C to 85°C. The backset spacing differs at 0.409" (10.40mm) compared to 0.590" (14.99mm) on the original part. These differences must be evaluated against specific application requirements. Both HARTING alternatives are active products with ROHS3 compliance.

Compliance Considerations:

Selection of substitute parts should account for RoHS compliance requirements in the target application. The original FCC17C37PC4D0 is RoHS non-compliant. All Amphenol ICC FCE17 series alternatives are RoHS compliant. HARTING alternatives are ROHS3 compliant. Applications subject to RoHS directives should utilize compliant alternatives.

Frequently Asked Questions (FAQ)

Q: Can the FCE17C37PC4D0 be used as a direct replacement for the FCC17C37PC4D0?

A: Yes. The FCE17C37PC4D0 maintains identical specifications across all critical parameters including connector style, type, position count, shell size, mounting configuration, termination method, current rating, and operating temperature range. The primary differences are product status (active versus obsolete) and RoHS compliance (compliant versus non-compliant).

Q: What is the difference between the multiple FCE17 variants (PC400, PC410, PC440, PC450, PC480, PC490, PC4E0)?

A: All FCE17 variants maintain identical mechanical and electrical specifications. Differences exist in dielectric material composition and contact form specifications, which are not provided in the available parameter data. Selection among these variants should be based on availability and any specific design requirements related to these properties.

Q: Can HARTING parts 09654226800 or 09654227800 replace the FCC17C37PC4D0?

A: These HARTING connectors provide functional equivalence with the following parameter variations: backset spacing of 0.409" instead of 0.590", current rating of 6.5A instead of 5A, and operating temperature range of -55°C to 125°C instead of -40°C to 85°C. Substitution is permissible when these parameter differences are compatible with application requirements.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by equivalence in connector style (D-Sub), connector type (Plug, Male Pins), number of positions (37), number of rows (2), shell size and layout (4 / DC, C), mounting type (Through Hole, Right Angle), termination method (Solder), current rating (minimum 5A), operating temperature range (minimum -40°C to 85°C), and material flammability rating (UL94 V-0).

Q: Are there packaging differences between the substitute parts?

A: Packaging information is not specified for most parts in the provided data. The HARTING alternatives are listed as bulk packaging. Specific packaging requirements should be confirmed with the component supplier.

Q: What is the inventory status of available substitutes?

A: Current inventory levels are: FCC17C37PC4D0 (1141 pcs), FCE17C37PC4D0 (1111 pcs), FCE17C37PC400 (810 pcs), FCE17C37PC410 (858 pcs), FCE17C37PC440 (959 pcs), FCE17C37PC450 (855 pcs), FCE17C37PC480 (691 pcs), FCE17C37PC490 (998 pcs), FCE17C37PC4E0 (822 pcs), 09654226800 (1047 pcs), and 09654227800 (822 pcs). Inventory levels are subject to change and should be verified at the time of procurement.

Q: Does the voltage rating difference affect substitution?

A: The original FCC17C37PC4D0 specifies a 200V voltage rating. The FCE17 series variants do not specify a voltage rating in the available data. The HARTING alternatives do not specify a voltage rating. Applications requiring a specific voltage rating should confirm this specification with the component manufacturer before substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message