FCC17C37PB690 D-Sub 37-Position Plug Connector Equivalent & Substitute Parts

Part Overview

The FCC17C37PB690 is a 37-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle through-hole solder termination. This connector features a male pin configuration, shell size 4 (DC, C) layout, and is designed for signal applications with board lock, filter, and grounding indent features.

The FCC17C37PB690 is classified as obsolete. Equivalent and substitute parts are available from active product lines, primarily within the Amphenol ICC FCE17 series and compatible offerings from HARTING, providing direct functional alternatives with maintained electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Type	D-Sub Plug, Male Pins
Number of Positions	37
Number of Rows	2
Shell Size, Connector Layout	4 (DC, C)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Flange Feature	Housing/Shell (M3)
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
Dielectric Material	Thermoplastic
Backset Spacing	0.405" (10.29mm)
Features	Board Lock, Filter, Grounding Indents

Substitute Part Grouping Explanation

Substitute parts for the FCC17C37PB690 are classified into two categories based on parametric equivalence:

Category 1: Direct Amphenol ICC FCE17 Series Equivalents

The FCE17C37PB690, FCE17C37PB600, FCE17C37PB610, FCE17C37PB640, FCE17C37PB650, FCE17C37PB680, FCE17C37PB6D0, and FCE17C37PB6E0 are parametric equivalents from the active FCE17 product line. These parts maintain identical specifications across all critical parameters: 37-position configuration, shell size 4 (DC, C), right-angle through-hole solder termination, 5A current rating, UL94 V-0 flammability rating, phosphor bronze contacts with 15.0µin gold finish, thermoplastic or glass-filled thermoplastic dielectric, M3 flange housing, board lock, filter, and grounding indent features. The primary difference is product status: FCE17 variants are active products, whereas FCC17C37PB690 is obsolete. All FCE17 variants are RoHS Compliant, compared to the non-compliant status of the original part.

Category 2: HARTING Cross-Manufacturer Alternatives

The HARTING 09654226800 and 09654227800 connectors provide functional substitution with the following parameter alignment: 37-position D-Sub plug configuration, shell size 4 (DC, C), right-angle through-hole solder termination, UL94 V-0 flammability rating, grounding indents, and stamped contact form. These parts differ in current rating (6.5A versus 5A), backset spacing (0.409" versus 0.405"), contact material (copper alloy versus phosphor bronze), shell finish (steel without tin plating specification), dielectric material (PBT/polyester glass-filled versus thermoplastic), and operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C). HARTING variants are ROHS3 Compliant and REACH Unaffected.

Substitution eligibility is determined by matching: connector type (D-Sub plug, male pins), position count (37), row configuration (2), shell size and layout (4, DC, C), mounting type (through-hole, right-angle), termination method (solder), flange feature (housing/shell), and core electrical ratings within application tolerance.

Parameter Comparison

Parameter	FCC17C37PB690	FCE17C37PB690	FCE17C37PB600	FCE17C37PB610	FCE17C37PB640	FCE17C37PB650	FCE17C37PB680	FCE17C37PB6D0	FCE17C37PB6E0	09654226800	09654227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Series	FCC17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	-	-
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins
Number of Positions	37	37	37	37	37	37	37	37	37	37	37
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	-	-
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	-	-
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	-	-	-	-	-	-	-	-	-	-
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Flange Feature	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Dielectric Material	Thermoplastic	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Backset Spacing	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.409" (10.40mm)	0.409" (10.40mm)
Features	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Grounding Indents	Grounding Indents
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (FCE17C37PB690, FCE17C37PB600, FCE17C37PB610, FCE17C37PB640, FCE17C37PB650, FCE17C37PB680, FCE17C37PB6D0, FCE17C37PB6E0)

The FCE17 series represents the direct active-product replacement for the obsolete FCC17C37PB690. These connectors maintain parametric equivalence across all critical electrical and mechanical specifications: identical 37-position configuration, shell size 4 (DC, C), right-angle through-hole solder termination, 5A current rating, phosphor bronze contacts with 15.0µin gold plating, UL94 V-0 flammability rating, and operating temperature range of -40°C to 85°C. All FCE17 variants are RoHS Compliant, addressing regulatory requirements that the original part does not meet. These parts are recommended as the primary substitution path for new designs and component replacement in existing applications.

HARTING 09654226800 and 09654227800

The HARTING connectors provide functional cross-manufacturer substitution with maintained D-Sub 37-position plug configuration, shell size 4 (DC, C), right-angle through-hole solder termination, and UL94 V-0 flammability rating. These parts offer higher current capacity (6.5A versus 5A) and extended operating temperature range (-55°C to 125°C), making them suitable for applications requiring enhanced thermal performance. HARTING variants are ROHS3 Compliant and REACH Unaffected. The backset spacing difference (0.409" versus 0.405") and contact material variation (copper alloy versus phosphor bronze) require mechanical and electrical validation within the specific application context. These parts are recommended when extended temperature performance or higher current capacity is required and mechanical compatibility is confirmed.

Frequently Asked Questions (FAQ)

Q: What determines whether a part can substitute for the FCC17C37PB690?

A: Substitution eligibility is based on matching the following parameters: D-Sub connector type with male pins, 37-position configuration, 2-row layout, shell size 4 (DC, C), right-angle through-hole mounting, solder termination, and M3 flange housing. Electrical ratings (current, voltage) and operating temperature range must be equal to or exceed the original specification. Contact finish, dielectric material composition, and RoHS compliance status are secondary considerations that do not prevent substitution but may affect regulatory or performance requirements.

Q: Why are the FCE17 series parts recommended over HARTING alternatives?

A: The FCE17 series maintains complete parametric equivalence with the FCC17C37PB690 across all specified parameters, including identical backset spacing (0.405"), contact material (phosphor bronze), contact finish thickness (15.0µin gold), and operating temperature range (-40°C to 85°C). The FCE17 variants are from the same manufacturer (Amphenol ICC) and product family, ensuring mechanical and electrical compatibility without additional validation. HARTING alternatives require verification of mechanical fit due to backset spacing tolerance and contact material differences.

Q: Can HARTING 09654226800 or 09654227800 be used in applications originally designed for FCC17C37PB690?

A: HARTING connectors are functionally compatible for applications where the following conditions are met: the application does not require the specific 0.405" backset spacing (HARTING provides 0.409"), the application can tolerate copper alloy contacts instead of phosphor bronze, and the application does not depend on the M3 threaded flange (HARTING provides unthreaded housing). The higher current rating (6.5A) and extended temperature range (-55°C to 125°C) of HARTING parts are beneficial for demanding environments. Mechanical fit validation is required before deployment.

Q: What is the difference between the multiple FCE17 part numbers (PB690, PB600, PB610, PB640, PB650, PB680, PB6D0, PB6E0)?

A: All listed FCE17 variants maintain identical electrical and mechanical specifications as documented in the parameter comparison table. The suffix variation (PB690, PB600, etc.) reflects internal Amphenol ICC product coding and does not indicate functional differences relevant to substitution. All variants are suitable replacements for the FCC17C37PB690 based on parametric equivalence.

Q: Is RoHS compliance a substitution requirement?

A: RoHS compliance is not a substitution requirement based on electrical or mechanical parameters. However, regulatory and procurement policies may mandate RoHS-compliant components for new designs or specific markets. The FCC17C37PB690 is RoHS non-compliant, while all FCE17 variants and HARTING alternatives are RoHS Compliant or ROHS3 Compliant. Component selection should align with applicable regulatory requirements for the target application and market.

Q: What is the inventory status of substitute parts?

A: FCE17C37PB690 has 1120 units in stock. FCE17C37PB600, FCE17C37PB610, FCE17C37PB640, FCE17C37PB650, FCE17C37PB680, FCE17C37PB6D0, and FCE17C37PB6E0 have 672, 676, 861, 1114, 697, 714, and 693 units in stock respectively. HARTING 09654226800 and 09654227800 have 1047 and 822 units in stock respectively. Inventory levels support immediate procurement for production requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message