FCC17B25PC480 D-Sub 25 Position Right Angle Solder Plug Connector

Part Overview

The FCC17B25PC480 is a 25 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right angle through-hole solder termination. This connector features a DB/B shell size (Size 3) configuration with male pins, designed for signal applications in industrial and commercial equipment.

The FCC17B25PC480 is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity, ensure supply chain availability, and support legacy system maintenance. Active production alternatives from Amphenol ICC and compatible manufacturers provide functional equivalence with improved availability and compliance status.

Key Parameters

Parameter	Value
Manufacturer Part Number	FCC17B25PC480
Manufacturer	Amphenol ICC (Commercial Products)
Series	FCC17
Connector Type	Plug, Male Pins
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
Flange Feature	Housing/Shell (4-40)
Features	Board Lock, Filter, Grounding Indents
Material Flammability Rating	UL94 V-0
Product Status	Obsolete
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the FCC17B25PC480 are grouped based on strict electrical and mechanical parameter compatibility. The following parameters determine substitution eligibility:

Critical Parameters (Must Match):

Connector Type: Plug, Male Pins
Number of Positions: 25
Number of Rows: 2
Shell Size, Connector Layout: 3 (DB, B)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A minimum
Operating Temperature Range: Must encompass -40°C ~ 85°C
Material Flammability Rating: UL94 V-0
Contact Material: Phosphor Bronze or equivalent copper alloy
Contact Finish: Gold
Dielectric Material: Thermoplastic or thermoplastic variants

Allowable Variations:

Voltage Rating: Substitutes may have unspecified voltage ratings if electrical performance is not degraded
Dielectric Material: Thermoplastic with glass filling is acceptable
Backset Spacing: Minor variations within manufacturing tolerance
Flange Feature: Housing/Shell configurations may vary (threaded vs. unthreaded)
RoHS Compliance: Active substitutes may be RoHS compliant despite original part non-compliance

Amphenol ICC FCE17 series parts (FCE17B25PC480, FCE17B25PC400, FCE17B25PC410, FCE17B25PC440, FCE17B25PC450, FCE17B25PC490, FCE17B25PC4D0, FCE17B25PC4E0) are direct parametric equivalents with identical electrical and mechanical specifications. HARTING 09653226800 and 09653227800 are functionally compatible alternatives with higher current ratings and extended temperature ranges.

Parameter Comparison

Parameter	FCC17B25PC480	FCE17B25PC480	FCE17B25PC400	FCE17B25PC410	FCE17B25PC440	FCE17B25PC450	FCE17B25PC490	FCE17B25PC4D0	FCE17B25PC4E0	09653226800	09653227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Shell Size	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not specified	Not specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (FCE17B25PC480, FCE17B25PC400, FCE17B25PC410, FCE17B25PC440, FCE17B25PC450, FCE17B25PC490, FCE17B25PC4D0, FCE17B25PC4E0):

These parts are direct functional equivalents to the FCC17B25PC480 with identical electrical and mechanical specifications. All FCE17 variants are in active production status with RoHS compliance, providing superior supply chain availability compared to the obsolete FCC17B25PC480. The FCE17 series maintains the same connector geometry, pin configuration, current rating, voltage rating, and operating temperature range. Selection among FCE17 variants depends on specific application requirements related to contact finish specifications and dielectric material composition, which are not differentiated in core electrical performance.

HARTING 09653226800 and 09653227800:

These connectors provide functional compatibility with enhanced electrical performance characteristics. Both HARTING parts support 6.5A current rating (versus 5A for the FCC17B25PC480) and extended operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C). These parts are suitable for applications requiring higher thermal or current margins. HARTING parts feature copper alloy contacts and are ROHS3 compliant. Backset spacing differs at 0.409" (10.40mm) compared to 0.590" (14.99mm) for Amphenol parts, requiring PCB layout verification before substitution.

Selection Priority:

For direct replacement with minimal design modification, select FCE17B25PC480 or other FCE17 variants. For applications requiring enhanced thermal or current performance, HARTING 09653226800 or 09653227800 are suitable with PCB layout verification.

Frequently Asked Questions (FAQ)

Q: Can FCE17B25PC480 directly replace FCC17B25PC480 without PCB modification?

A: Yes. The FCE17B25PC480 maintains identical connector geometry, pin spacing (0.590" backset), shell size (DB/B Size 3), mounting configuration (through-hole right angle), and electrical ratings (5A, 200V). No PCB layout changes are required for direct substitution.

Q: What is the difference between the various FCE17B25PC4XX variants?

A: All FCE17B25PC4XX variants (PC400, PC410, PC440, PC450, PC490, PC4D0, PC4E0) share identical electrical and mechanical specifications. Differences exist in contact finish specifications and dielectric material composition details not provided in the core parameter set. Selection among variants should be based on specific application requirements or existing design documentation.

Q: Are HARTING 09653226800 and 09653227800 pin-compatible with FCC17B25PC480?

A: Both connectors are electrically and functionally compatible with 25 positions, male pins, and DB/B shell size. However, the backset spacing differs: HARTING parts use 0.409" (10.40mm) versus Amphenol parts at 0.590" (14.99mm). PCB layout verification is required before substitution to confirm mounting hole compatibility.

Q: What is the significance of RoHS compliance for substitute selection?

A: The FCC17B25PC480 is RoHS non-compliant. All Amphenol FCE17 variants and HARTING alternatives are RoHS compliant or ROHS3 compliant. For applications subject to RoHS regulations or customer requirements, compliant substitutes are mandatory. For legacy systems without RoHS requirements, non-compliance is not a technical barrier.

Q: Can I use HARTING parts in place of Amphenol parts in existing designs?

A: HARTING 09653226800 and 09653227800 provide functional equivalence with enhanced performance (6.5A vs. 5A, -55°C ~ 125°C vs. -40°C ~ 85°C). However, the different backset spacing (0.409" vs. 0.590") requires PCB layout verification. If PCB mounting holes are compatible, HARTING parts are suitable substitutes with performance margin improvement.

Q: What is the current rating difference between FCC17B25PC480 and HARTING alternatives?

A: FCC17B25PC480 and all Amphenol FCE17 variants are rated at 5A. HARTING 09653226800 and 09653227800 are rated at 6.5A. For applications operating at or near 5A, HARTING parts provide 30% additional current margin. For applications below 5A, both options are functionally equivalent.

Q: Are there any compliance certifications that differ between substitute options?

A: All parts carry UL94 V-0 flammability rating. Amphenol FCE17 parts are RoHS compliant. HARTING parts are ROHS3 compliant and REACH unaffected. For applications requiring specific compliance documentation, verify that selected substitute meets customer or regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message