ESR25JZPJ623 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ623 is a 62 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package with 0.667W power rating. This component is rated for automotive applications under AEC-Q200 and features pulse withstanding capability. The part is currently in active production status. Substitute parts may be required due to inventory constraints, supply chain considerations, or specific packaging preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

ESR25JZPJ623

Rohm SemiconductorIn Stock: 717ESR25JZPJ623 Datasheet

Current PartRFQ

CRCW121062K0JNEA

Vishay DaleIn Stock: 1166CRCW121062K0JNEA Datasheet

UpgradeRFQ

ERJ-14YJ623U

Panasonic Electronic ComponentsIn Stock: 10926ERJ-14YJ623U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters: resistance value (62 kOhms), tolerance (±5%), package type (1210/3225 Metric), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C to 155°C), and automotive AEC-Q200 compliance. Power rating may vary within the acceptable range for the application, provided the substitute meets or exceeds the minimum power requirement. All substitute parts must maintain ROHS3 compliance and MSL 1 rating.

The identified substitute parts meet these criteria with the following considerations:

• CRCW121062K0JNEA (Vishay Dale): Identical electrical specifications with 0.5W power rating and Cut Tape packaging
• ERJ-14YJ623U (Panasonic Electronic Components): Identical electrical specifications with 0.5W power rating and Tape & Reel packaging, marked as Not For New Designs

Parameter Comparison

Engineering Selection Recommendations

CRCW121062K0JNEA is the primary substitute option. It maintains active product status, meets all electrical and mechanical specifications, and is available in higher inventory quantity (1126 pcs). The 0.5W power rating is acceptable for applications where the original 0.667W rating is not a limiting constraint. This part is suitable for new designs and long-term supply chain planning.

ERJ-14YJ623U is available as a secondary option with the highest inventory availability (10857 pcs). However, this part carries a "Not For New Designs" status, making it unsuitable for new product development or long-term production commitments. It may be considered only for legacy system maintenance or short-term supply gap mitigation where design freeze conditions permit.

Frequently Asked Questions (FAQ)

Q: Can CRCW121062K0JNEA replace ESR25JZPJ623 in all applications?

A: Yes, provided the application does not require the higher power dissipation capability of the 0.667W rating. The CRCW121062K0JNEA is rated for 0.5W continuous operation. If your circuit design operates the resistor below 0.5W dissipation, substitution is electrically valid. All other parameters—resistance, tolerance, temperature coefficient, operating range, and AEC-Q200 compliance—are identical.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both packaging formats contain the same component. Tape & Reel (TR) is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape (CT) is supplied as individual tape segments, typically for lower-volume or manual assembly operations. The electrical and mechanical properties of the component are unchanged.

Q: Why is ERJ-14YJ623U marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development and recommends against using this part in new product designs. While the part remains electrically and mechanically compatible, it should be reserved for maintenance of existing products or temporary supply solutions only.

Q: Are all substitute parts AEC-Q200 compliant?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, matching the original ESR25JZPJ623 specification.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake-out requirements. All parts in this comparison carry MSL 1, ensuring no special storage or handling procedures are necessary.