ESR18EZPJ564 Equivalent & Substitute Parts

Part Overview

The ESR18EZPJ564 is a 560 kOhms ±5% thick film chip resistor in 1206 (3216 Metric) package rated for 0.5W power dissipation. Manufactured by Rohm Semiconductor, this component is designed for automotive applications and meets AEC-Q200 qualification with pulse withstanding capability. The part is currently active in production with 1040 units in stock. Substitute parts may be required due to inventory constraints, supply chain optimization, or application-specific power rating requirements.

Substiute Parts

ESR18EZPJ564

Rohm SemiconductorIn Stock: 1081ESR18EZPJ564 Datasheet

Current PartRFQ

ERJ-P08J564V

Panasonic Electronic ComponentsIn Stock: 8956ERJ-P08J564V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR18EZPJ564 is determined by the following critical parameters:

• Resistance value must be 560 kOhms
• Tolerance must be ±5%
• Package must be 1206 (3216 Metric)
• Composition must be thick film
• Temperature coefficient must be ±200ppm/°C
• Operating temperature range must be -55°C ~ 155°C
• AEC-Q200 automotive qualification is required
• RoHS3 compliance is mandatory

The power rating may be equal to or greater than 0.5W, as higher power ratings provide additional thermal margin without affecting circuit functionality. The ERJ-P08J564V meets all substitution criteria with an upgraded power rating of 0.667W (2/3W).

Parameter Comparison

Engineering Selection Recommendations

The ERJ-P08J564V is a direct substitute for the ESR18EZPJ564 in automotive applications. Both components maintain identical electrical specifications for resistance, tolerance, temperature coefficient, and operating temperature range. Both are AEC-Q200 qualified and ROHS3 compliant, meeting automotive regulatory requirements.

The ERJ-P08J564V provides a higher power rating (0.667W versus 0.5W), which represents an upgrade in thermal capability. The physical dimensions remain compatible with 1206 package footprints, with a maximum seated height difference of 0.002" (0.05mm). This minor height variation is within standard PCB assembly tolerances and does not affect circuit board layout or component placement.

Selection between these parts should be based on inventory availability and supply chain requirements, as both components are functionally equivalent for the specified application parameters.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J564V replace ESR18EZPJ564 in existing designs?

A: Yes. Both components share identical resistance, tolerance, temperature coefficient, and operating temperature specifications. Both are AEC-Q200 qualified and ROHS3 compliant. The 1206 package footprint is identical, and the seated height difference of 0.002" is within standard assembly tolerances.

Q: What is the significance of the higher power rating on the ERJ-P08J564V?

A: The ERJ-P08J564V is rated for 0.667W compared to the ESR18EZPJ564 at 0.5W. A higher power rating provides additional thermal margin and does not negatively affect circuit performance. The substitute can safely operate in any application designed for the original part.

Q: Are there any compliance or certification differences?

A: No. Both components are AEC-Q200 qualified for automotive use, ROHS3 compliant, REACH unaffected, and classified under the same HTSUS code (8533.21.0030). Regulatory and compliance status is equivalent.

Q: Does the 0.002" height difference affect PCB assembly?

A: No. The maximum seated height difference of 0.002" (0.05mm) is negligible for standard surface mount assembly processes and falls within typical PCB design clearances for 1206 components.

Q: What parameters must match for a valid substitution?

A: Critical parameters that must match are resistance value (560 kOhms), tolerance (±5%), package (1206), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive qualification (AEC-Q200). Power rating may be equal to or greater than the original specification.