ESLM06200 Equivalent & Substitute Parts

Part Overview

The ESLM06200 is a 6-position wire-to-board terminal block manufactured by Amphenol PCD, designed for horizontal PCB mounting with side entry wire connections. This component operates at 300V with a 14.6A current rating and accommodates wire gauges from 14-30 AWG. The part is currently active in production with 1034 units in stock. Equivalent parts are identified when they maintain the same electrical specifications, mechanical form factor, and functional performance characteristics necessary for direct substitution in circuit designs.

Substiute Parts

ESLM06200

Amphenol PCDIn Stock: 1106ESLM06200 Datasheet

Current PartRFQ

282837-6

TE Connectivity AMP ConnectorsIn Stock: 6424282837-6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ESLM06200 and 282837-6 are functionally equivalent terminal blocks based on the following critical parameters:

• Both maintain 6 positions per level with 0.200" (5.08mm) pitch spacing
• Both feature horizontal-with-board mating orientation for identical PCB mounting
• Both support 14.6A current and 300V voltage ratings
• Both utilize through-hole mounting with screw-type rising cage clamp termination
• Both incorporate side interlocking features for mechanical stability
• Both use polyamide (PA66/Nylon 6/6) housing material
• Both comply with RoHS standards

The primary differences are wire gauge acceptance range (ESLM06200: 14-30 AWG vs. 282837-6: 16-28 AWG), housing color, contact material composition, and screw torque specifications. These differences do not prevent substitution when wire gauge requirements fall within the overlapping 16-28 AWG range.

Parameter Comparison

Engineering Selection Recommendations

Both ESLM06200 and 282837-6 are active production components with full RoHS compliance. The ESLM06200 maintains broader wire gauge compatibility (14-30 AWG) and is available in higher inventory volume (1034 units). The 282837-6 offers ROHS3 compliance and REACH status documentation, with significantly higher stock availability (6340 units).

Selection between these parts should be based on wire gauge requirements within the overlapping 16-28 AWG specification range, inventory availability, and regulatory documentation needs. Both parts satisfy identical electrical and mechanical performance criteria for standard applications.

Frequently Asked Questions (FAQ)

Q: Can 282837-6 replace ESLM06200 in all applications?

A: Direct substitution is valid when wire gauges fall within the 16-28 AWG overlap range. Applications requiring 14-15 AWG or 29-30 AWG wire connections must use ESLM06200.

Q: What are the key compatibility factors for these terminal blocks?

A: Compatibility is determined by matching pitch (5.08mm), position count (6), current/voltage ratings (14.6A/300V), mounting type (through-hole), and termination method (screw-type rising cage clamp).

Q: Do the different contact materials affect electrical performance?

A: Both copper alloy and brass contacts with tin plating meet the specified 14.6A and 300V ratings. Material differences do not impact electrical performance within the stated parameters.

Q: What is the significance of the packaging difference (Tray vs. Bulk)?

A: Packaging type affects handling and storage but does not impact component functionality or electrical characteristics. Selection should consider procurement and assembly process requirements.

Q: Are there operating temperature limitations for substitution?

A: ESLM06200 specifies -40°C to 110°C operation. 282837-6 does not provide an operating temperature range in the available data. Applications with defined temperature requirements should reference ESLM06200 specifications.