ES1GLHRVG Equivalent & Substitute Parts

Part Overview

The ES1GLHRVG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 400 V DC reverse voltage and 1 A average rectified current in a Sub SMA surface mount package. This component is classified as Active product status and carries AEC-Q101 automotive qualification. The ES1GLHRVG is supplied in tape and reel packaging format with 972 pieces currently in stock inventory.

Equivalent and substitute parts are identified to address application requirements including alternative packaging formats, extended inventory availability, and parametric variations within acceptable operating ranges for general-purpose rectification circuits.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	400	V
Current - Average Rectified (Io)	1	A
Voltage - Forward (Vf) (Max) @ If	1.3 @ 1 A	V
Reverse Recovery Time (trr)	35	ns
Current - Reverse Leakage @ Vr	5 @ 400 V	µA
Capacitance @ Vr, F	8 @ 4V, 1MHz	pF
Package / Case	DO-219AB	-
Mounting Type	Surface Mount	-
Operating Temperature - Junction	-55 to 150	°C
RoHS Status	ROHS3 Compliant	-
Grade	Automotive	-
Qualification	AEC-Q101	-

Substitute Part Grouping Explanation

Substitute parts for the ES1GLHRVG are classified into two categories based on parametric equivalence and application compatibility:

Parametric Equivalents maintain identical electrical specifications across all critical parameters: 400 V reverse voltage rating, 1 A average rectified current, 1.3 V forward voltage drop at 1 A, 35 ns reverse recovery time, 5 µA reverse leakage current at 400 V, and 8 pF junction capacitance. These parts differ only in packaging format (Cut Tape, Tape & Reel) and product status designation. Parametric equivalents include ES1GL and ES1GL RVG.

Similar Parts maintain the same package type (DO-219AB Sub SMA) and reverse voltage rating (400 V) but operate at reduced current ratings (500 mA versus 1 A) with different electrical characteristics including forward voltage, reverse recovery time, and junction capacitance. The RS07G-M-08 from Vishay General Semiconductor falls into this category and is suitable for applications with lower current requirements.

Key Parameters Determining Substitution:

Voltage - DC Reverse (Vr) (Max): 400 V
Current - Average Rectified (Io): 1 A (parametric equivalents) or 500 mA (similar parts)
Package / Case: DO-219AB
Mounting Type: Surface Mount
Operating Temperature Range: -55°C to 150°C

Parameter Comparison

Parameter	ES1GLHRVG	ES1GL	ES1GL RVG	HS1GL RVG	RS07G-M-08
Manufacturer	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Vishay General Semiconductor
Voltage - DC Reverse (Vr) (Max)	400 V	400 V	400 V	400 V	400 V
Current - Average Rectified (Io)	1 A	1 A	1 A	1 A	500 mA
Voltage - Forward (Vf) (Max) @ If	1.3 V @ 1 A	1.3 V @ 1 A	1.3 V @ 1 A	1.3 V @ 1 A	1.15 V @ 700 mA
Reverse Recovery Time (trr)	35 ns	35 ns	35 ns	50 ns	150 ns
Current - Reverse Leakage @ Vr	5 µA @ 400 V	5 µA @ 400 V	5 µA @ 400 V	5 µA @ 400 V	10 µA @ 400 V
Capacitance @ Vr, F	8 pF @ 4V, 1MHz	8 pF @ 4V, 1MHz	8 pF @ 4V, 1MHz	15 pF @ 4V, 1MHz	9 pF @ 4V, 1MHz
Package / Case	DO-219AB	DO-219AB	DO-219AB	DO-219AB	DO-219AB
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Operating Temperature - Junction	-55°C to 150°C	-55°C to 150°C	-55°C to 150°C	-55°C to 150°C	-55°C to 150°C
Product Status	Active	Not For New Designs	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Grade	Automotive	-	-	-	Automotive
Qualification	AEC-Q101	-	-	-	AEC-Q101

Engineering Selection Recommendations

For Direct Replacement (Parametric Equivalents):

ES1GL RVG is the primary parametric equivalent to ES1GLHRVG. Both parts maintain identical electrical specifications with 400 V reverse voltage, 1 A average rectified current, 35 ns reverse recovery time, and 8 pF junction capacitance. ES1GL RVG carries Active product status and is supplied in Tape & Reel packaging with 4,619 pieces in inventory. This part is suitable for new designs and production applications requiring the same electrical performance as the ES1GLHRVG.

ES1GL is a parametric equivalent with identical electrical specifications but carries Not For New Designs product status. This part is available in Cut Tape and Digi-Reel packaging formats with significantly higher inventory (95,300 pieces). ES1GL is appropriate for legacy system maintenance and repair applications where design changes are not feasible.

HS1GL RVG is a parametric equivalent from Taiwan Semiconductor Corporation with identical voltage and current ratings. This part exhibits a 50 ns reverse recovery time (compared to 35 ns for ES1GLHRVG) and 15 pF junction capacitance (compared to 8 pF). HS1GL RVG carries Active product status and is supplied in Tape & Reel packaging with 18,316 pieces in inventory. Selection of HS1GL RVG is appropriate when the extended reverse recovery time and increased junction capacitance are acceptable for the application circuit.

For Current-Limited Applications:

RS07G-M-08 from Vishay General Semiconductor is a similar part suitable for applications with maximum current requirements of 500 mA. This part maintains the 400 V reverse voltage rating and DO-219AB package format but operates at half the current rating of the ES1GLHRVG. RS07G-M-08 carries AEC-Q101 automotive qualification and Active product status with 6,400 pieces in inventory. Selection of RS07G-M-08 is appropriate only when circuit current requirements do not exceed 500 mA and the extended 150 ns reverse recovery time is acceptable.

Frequently Asked Questions (FAQ)

Q: Can ES1GL RVG be used as a direct replacement for ES1GLHRVG?

A: Yes. ES1GL RVG is a parametric equivalent with identical electrical specifications: 400 V reverse voltage, 1 A average rectified current, 1.3 V forward voltage drop at 1 A, 35 ns reverse recovery time, 5 µA reverse leakage current, and 8 pF junction capacitance. Both parts use the DO-219AB package and surface mount technology. The primary difference is packaging format: ES1GLHRVG is supplied in Tape & Reel while ES1GL RVG is also supplied in Tape & Reel. Both carry Active product status and ROHS3 compliance.

Q: What is the difference between ES1GL and ES1GL RVG?

A: ES1GL and ES1GL RVG are parametric equivalents with identical electrical specifications. The primary differences are packaging format and product status. ES1GL is available in Cut Tape and Digi-Reel formats and carries Not For New Designs status. ES1GL RVG is supplied in Tape & Reel format and carries Active product status. For new design applications, ES1GL RVG is the appropriate selection.

Q: Can HS1GL RVG replace ES1GLHRVG in all applications?

A: HS1GL RVG maintains the same voltage and current ratings as ES1GLHRVG but exhibits different dynamic characteristics. The reverse recovery time is 50 ns (compared to 35 ns for ES1GLHRVG) and junction capacitance is 15 pF (compared to 8 pF). These differences may affect circuit performance in high-frequency switching applications or circuits with tight timing requirements. HS1GL RVG is suitable for general-purpose rectification where these parameter variations are acceptable.

Q: Is RS07G-M-08 a suitable replacement for ES1GLHRVG?

A: RS07G-M-08 is a similar part, not a parametric equivalent. It is rated for 500 mA average rectified current, which is half the 1 A rating of ES1GLHRVG. RS07G-M-08 is suitable only for applications with maximum current requirements not exceeding 500 mA. The reverse recovery time of 150 ns is significantly longer than the 35 ns of ES1GLHRVG, which may affect circuit performance in switching applications. RS07G-M-08 carries AEC-Q101 automotive qualification and Active product status.

Q: What packaging formats are available for equivalent parts?

A: Equivalent parts are available in multiple packaging formats. ES1GLHRVG and ES1GL RVG are supplied in Tape & Reel format. ES1GL is available in both Cut Tape and Digi-Reel formats. All equivalent parts use the DO-219AB package case with Sub SMA supplier device package designation. Selection of packaging format depends on production equipment compatibility and order quantity requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed (ES1GL, ES1GL RVG, HS1GL RVG, and RS07G-M-08) carry ROHS3 Compliant status. All parts are also REACH Unaffected and classified under ECCN EAR99 for export control purposes.

Q: Which substitute part has the highest inventory availability?

A: ES1GL has the highest inventory availability with 95,300 pieces in stock. This part carries Not For New Designs status and is available in Cut Tape and Digi-Reel packaging formats. For new design applications requiring high inventory availability, ES1GL RVG is available with 4,619 pieces in stock and carries Active product status.

Q: Do all substitute parts operate over the same temperature range?

A: Yes. All substitute parts (ES1GL, ES1GL RVG, HS1GL RVG, and RS07G-M-08) operate over the junction temperature range of -55°C to 150°C, which matches the ES1GLHRVG operating temperature specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message