ERJ-S1TJ473U Equivalent & Substitute Parts

Part Overview

The ERJ-S1TJ473U is a 47 kOhms ±5% 1W thick film chip resistor in 2512 (6432 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for demanding automotive and industrial applications. The part is currently active in production with 999 pieces in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements change, or when alternative manufacturers offer superior availability or cost performance while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	47 kOhms
Tolerance	±5%
Power Rating	1W
Package / Case	2512 (6432 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1TJ473U is determined by the following critical parameters:

Primary Substitution Criteria:

Resistance value: 47 kOhms (exact match required)
Tolerance: ±5% (exact match required)
Package: 2512 (6432 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature Coefficient: ±200ppm/°C (exact match required)
Operating Temperature Range: -55°C ~ 155°C minimum (equal or wider range acceptable)
RoHS Compliance: ROHS3 Compliant (required)

Secondary Considerations:

Power rating may exceed 1W (higher power ratings are backward compatible)
Automotive AEC-Q200 qualification is preferred but not mandatory for all applications
Moisture Sensitivity Level 1 is standard across all candidates

Parts are grouped into direct equivalents (matching all primary criteria including power rating) and functional substitutes (matching all primary criteria with higher power ratings).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	AEC-Q200	Product Status
ERJ-S1TJ473U	Panasonic Electronic Components	47 kOhms	±5%	1W	2512	±200ppm/°C	-55°C ~ 155°C	Yes	Active
ERJ-1TYJ473U	Panasonic Electronic Components	47 kOhms	±5%	1W	2512	±200ppm/°C	-55°C ~ 155°C	Yes	Not For New Designs
352047KJT	TE Connectivity Passive Product	47 kOhms	±5%	1W	2512	±200ppm/°C	-55°C ~ 125°C	No	Active
CRCW251247K0JNEG	Vishay Dale	47 kOhms	±5%	1W	2512	±200ppm/°C	-55°C ~ 155°C	Yes	Active
CRCW251247K0JNEGHP	Vishay Dale	47 kOhms	±5%	1.5W	2512	±200ppm/°C	-55°C ~ 155°C	Yes	Active
CRM2512-JW-473ELF	Bourns Inc.	47 kOhms	±5%	2W	2512	±200ppm/°C	-55°C ~ 155°C	No	Active
RMCF2512JT47K0	Stackpole Electronics Inc	47 kOhms	±5%	1W	2512	±200ppm/°C	-55°C ~ 155°C	Yes	Active

Engineering Selection Recommendations

Direct Equivalents (1W, AEC-Q200, Active Status):

CRCW251247K0JNEG (Vishay Dale) and RMCF2512JT47K0 (Stackpole Electronics Inc) are direct functional equivalents with identical electrical specifications, automotive qualification, and active production status. Both are suitable for direct replacement in automotive and industrial applications.

Functional Substitute with Enhanced Power Rating:

CRCW251247K0JNEGHP (Vishay Dale) provides 1.5W power rating with pulse withstanding capability while maintaining all other electrical parameters and AEC-Q200 qualification. This part is suitable for applications requiring higher transient power handling.

Functional Substitute with Higher Power Rating:

CRM2512-JW-473ELF (Bourns Inc.) provides 2W power rating with current sense capability. This part lacks AEC-Q200 qualification and is suitable for non-automotive applications or where higher power dissipation is required.

Limited Availability Substitute:

TE Connectivity 352047KJT is electrically compatible but has a reduced operating temperature range (-55°C ~ 125°C versus -55°C ~ 155°C) and lacks AEC-Q200 qualification. Use only when automotive qualification is not required and maximum operating temperature does not exceed 125°C.

Obsolescence Consideration:

ERJ-1TYJ473U (Panasonic Electronic Components) is marked "Not For New Designs" and should be avoided for new product development despite full electrical compatibility.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with higher power rating than the original ERJ-S1TJ473U?

A: Yes. A 1.5W or 2W rated resistor can replace a 1W rated resistor in the same package. Higher power ratings indicate greater thermal capability and do not affect electrical performance at the specified 1W operating point. Physical dimensions remain compatible within the 2512 package specification.

Q: What is the difference between ERJ-S1TJ473U and ERJ-1TYJ473U?

A: Both parts are electrically identical 47 kOhms ±5% 1W thick film resistors in 2512 package with AEC-Q200 qualification. The primary difference is product status: ERJ-S1TJ473U is active in production, while ERJ-1TYJ473U is marked "Not For New Designs" and represents an older series (ERJ-1T versus ERJ-S1T). For new designs, use ERJ-S1TJ473U or equivalent active parts.

Q: Is the TE Connectivity 352047KJT a suitable replacement?

A: The 352047KJT is electrically compatible for resistance, tolerance, power rating, and package. However, it has two limitations: operating temperature range is limited to -55°C ~ 125°C (versus -55°C ~ 155°C for the original), and it lacks AEC-Q200 automotive qualification. Use this part only in non-automotive applications where maximum operating temperature does not exceed 125°C.

Q: Why do some substitutes lack AEC-Q200 qualification?

A: AEC-Q200 is an automotive industry qualification standard requiring specific reliability and quality testing. Parts without this qualification are suitable for general industrial, consumer, or non-automotive applications but should not be used in automotive designs requiring this certification.

Q: Are there dimensional differences between substitute parts?

A: All parts use the 2512 (6432 Metric) package with identical length and width specifications (approximately 6.3-6.4mm × 3.1-3.2mm). Height variations are minimal (0.70-0.80mm maximum seated height). These dimensional differences do not affect PCB layout or assembly compatibility.

Q: Can I substitute CRCW251247K0JNEGHP for the original part in a cost-sensitive application?

A: CRCW251247K0JNEGHP provides enhanced specifications (1.5W rating and pulse withstanding capability) compared to the 1W original. If your application does not require these enhanced features, this part represents over-specification. Select CRCW251247K0JNEG (1W equivalent) for cost optimization while maintaining full compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message