Request Quote
(Ships tomorrow)
Equivalent & Substitute Parts for ERJ-S1TJ331U
Part Overview
The Panasonic ERJ-S1TJ331U is a 330 Ohm ±5% 1W thick film chip resistor in 2512 (6432 Metric) package format. This component is rated for automotive applications under AEC-Q200 standard and features anti-sulfur construction. The part is currently in active production status with 798 units in stock.
Substitute parts are necessary when the primary part becomes unavailable, when alternative sourcing is required for supply chain optimization, or when design requirements permit the use of functionally equivalent components from different manufacturers.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Resistance | 330 Ohms |
| Tolerance | ±5% |
| Power Rating | 1W |
| Package / Case | 2512 (6432 Metric) |
| Composition | Thick Film |
| Temperature Coefficient | ±200ppm/°C |
| Operating Temperature Range | -55°C ~ 155°C |
| Automotive Rating | AEC-Q200 |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitute parts for the ERJ-S1TJ331U are qualified based on the following electrical and mechanical parameters:
Primary Substitution Criteria:
- Resistance value: 330 Ohms
- Tolerance: ±5%
- Power rating: 1W (or higher)
- Package: 2512 (6432 Metric)
- Composition: Thick Film
- Temperature coefficient: ±200ppm/°C
- Operating temperature range: -55°C to 155°C (minimum)
- RoHS3 compliance
Automotive Compliance: Parts with AEC-Q200 rating are direct substitutes. Parts without explicit AEC-Q200 designation may be used in non-automotive applications or where automotive qualification is not required.
Packaging Consideration: All substitute parts use the same 2512 package footprint, ensuring mechanical and electrical compatibility in PCB layouts.
Parameter Comparison
| Manufacturer Part Number | Manufacturer | Resistance | Tolerance | Power (W) | Temp Coeff | Op. Temp Range | AEC-Q200 | Product Status | Inventory |
|---|---|---|---|---|---|---|---|---|---|
| ERJ-S1TJ331U | Panasonic Electronic Components | 330 Ω | ±5% | 1 | ±200ppm/°C | -55°C ~ 155°C | Yes | Active | 798 |
| ERJ-1TYJ331U | Panasonic Electronic Components | 330 Ω | ±5% | 1 | ±200ppm/°C | -55°C ~ 155°C | Yes | Not For New Designs | 16022 |
| 3520330RJT | TE Connectivity Passive Product | 330 Ω | ±5% | 1 | ±200ppm/°C | -55°C ~ 125°C | No | Active | 19462 |
| CR2512-JW-331ELF | Bourns Inc. | 330 Ω | ±5% | 1 | ±200ppm/°C | -55°C ~ 155°C | No | Active | 3410 |
| CRCW2512330RJNEG | Vishay Dale | 330 Ω | ±5% | 1 | ±200ppm/°C | -55°C ~ 155°C | Yes | Active | 16400 |
| CRCW2512330RJNEGHP | Vishay Dale | 330 Ω | ±5% | 1.5 | ±200ppm/°C | -55°C ~ 155°C | Yes | Active | 2749 |
| RMCF2512JT330R | Stackpole Electronics Inc | 330 Ω | ±5% | 1 | ±200ppm/°C | -55°C ~ 155°C | Yes | Active | 35883 |
Engineering Selection Recommendations
For Automotive Applications (AEC-Q200 Required):
- CRCW2512330RJNEG (Vishay Dale): Active status, AEC-Q200 rated, 16400 units available
- RMCF2512JT330R (Stackpole Electronics): Active status, AEC-Q200 rated, highest inventory at 35883 units
- CRCW2512330RJNEGHP (Vishay Dale): Active status, AEC-Q200 rated, 1.5W power rating provides margin above 1W requirement
For General Purpose Applications:
- CR2512-JW-331ELF (Bourns Inc.): Active status, full temperature range support (-55°C ~ 155°C), 3410 units available
- 3520330RJT (TE Connectivity): Active status, reduced upper temperature limit (-55°C ~ 125°C), 19462 units available
Legacy Designs (Not Recommended for New Designs):
- ERJ-1TYJ331U (Panasonic): Marked "Not For New Designs" but available with 16022 units in stock for existing production support
Frequently Asked Questions (FAQ)
Q: Can CRCW2512330RJNEGHP (1.5W) replace ERJ-S1TJ331U (1W)? A: Yes. The 1.5W rating is a higher power capability and does not affect compatibility. The component will function identically in circuits designed for 1W resistors. The 2512 package dimensions remain unchanged.
Q: What is the difference between parts with and without AEC-Q200 rating? A: AEC-Q200 certification indicates the part meets automotive industry reliability and qualification standards. For automotive applications, AEC-Q200 rated parts are required. For non-automotive applications, non-rated parts are acceptable.
Q: Are there dimensional differences between manufacturers? A: Minor dimensional variations exist within tolerance. The Bourns CR2512-JW-331ELF measures 6.30mm x 3.10mm versus Panasonic's 6.40mm x 3.20mm. All parts fit the 2512 package footprint and are PCB compatible.
Q: Why is ERJ-1TYJ331U marked "Not For New Designs"? A: This designation indicates the part is in mature/legacy status. Existing production can continue, but new designs should use active status alternatives such as ERJ-S1TJ331U or other active parts listed.
Q: Can I use 3520330RJT if my application requires -55°C ~ 155°C operation? A: No. The 3520330RJT upper temperature limit is 125°C, which does not meet the full -55°C ~ 155°C range. Use parts with confirmed 155°C upper limit for full temperature range applications.
Q: Which substitute has the best inventory availability? A: RMCF2512JT330R (Stackpole Electronics) has the highest inventory at 35883 units and meets all automotive AEC-Q200 requirements.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts