Equivalent & Substitute Parts for ERJ-S1TF95R3U

Part Overview

The ERJ-S1TF95R3U is a 95.3 Ohms ±1% 1W chip resistor in 2512 (6432 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 871 pieces in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design revisions require alternative qualified sources, or when supply chain optimization requires multi-source qualification. The substitute parts listed maintain identical electrical specifications and package dimensions to ensure direct replacement capability.

Substiute Parts

ERJ-S1TF95R3U

Panasonic Electronic ComponentsIn Stock: 899ERJ-S1TF95R3U Datasheet

Current PartRFQ

ERJ-1TNF95R3U

Panasonic Electronic ComponentsIn Stock: 2737ERJ-1TNF95R3U Datasheet

SimilarRFQ

CRCW251295R3FKEG

Vishay DaleIn Stock: 6888CRCW251295R3FKEG Datasheet

SimilarRFQ

RMCF2512FT95R3

Stackpole Electronics IncIn Stock: 7538RMCF2512FT95R3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1TF95R3U is determined by strict equivalence across the following parameters:

• Resistance value: 95.3 Ohms
• Tolerance: ±1%
• Power rating: 1W
• Package: 2512 (6432 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

All substitute parts listed meet these criteria and are therefore electrically and mechanically interchangeable with the primary part. Dimensional tolerances remain within acceptable limits for PCB assembly compatibility.

Parameter Comparison

Engineering Selection Recommendations

For new designs and ongoing production, CRCW251295R3FKEG (Vishay Dale) and RMCF2512FT95R3 (Stackpole) are preferred substitutes as both maintain Active product status with full AEC-Q200 automotive qualification and ROHS3 compliance.

ERJ-1TNF95R3U (Panasonic) is electrically and mechanically equivalent but carries a "Not For New Designs" status. This part remains suitable for legacy system maintenance and field replacements where the original specification must be maintained, but should not be selected for new product development.

All three substitute parts are qualified for automotive applications and meet the same environmental and compliance requirements as the primary part ERJ-S1TF95R3U.

Frequently Asked Questions (FAQ)

Q: Can ERJ-1TNF95R3U be used as a direct replacement for ERJ-S1TF95R3U?

A: Yes, ERJ-1TNF95R3U is electrically and mechanically equivalent. However, its "Not For New Designs" status means it should only be used for legacy system support or field replacements, not for new product development.

Q: What are the dimensional differences between substitute parts?

A: CRCW251295R3FKEG has dimensions of 0.248" L x 0.124" W (6.30mm x 3.15mm), while ERJ-S1TF95R3U and RMCF2512FT95R3 are 0.252" L x 0.126" W (6.40mm x 3.20mm). All three fit the 2512 package specification and are PCB-compatible. Height is identical at 0.028" (0.70mm) maximum.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes, all listed substitute parts carry AEC-Q200 automotive qualification and are suitable for automotive applications.

Q: Do all parts meet RoHS requirements?

A: Yes, all parts are ROHS3 compliant and meet current environmental regulations.

Q: Which substitute should be selected for new automotive designs?

A: CRCW251295R3FKEG or RMCF2512FT95R3 are recommended for new designs, as both maintain Active product status with full automotive qualification.