ERJ-S08F8061V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F8061V is a 1206 (3216 Metric) thick film chip resistor manufactured by Panasonic Electronic Components. This component provides 8.06 kOhms resistance at ±1% tolerance with 0.25W power rating. It is specified for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently in active production status with 1010 units available in inventory.

Substitute parts are necessary when the primary part becomes unavailable, when design requirements shift toward alternative certifications or enhanced performance characteristics, or when supply chain optimization requires component standardization across multiple manufacturers.

Key Parameters

Parameter	Value
Resistance	8.06 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F8061V is determined by strict equivalence across the following parameters:

Resistance value: 8.06 kOhms (exact match required)
Tolerance: ±1% (exact match required)
Package: 1206 (3216 Metric) (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C to 155°C (exact match required)
Composition: Thick film (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)
Moisture sensitivity: MSL 1 (exact match required)

Power rating variations are permitted only when the substitute part meets or exceeds the 0.25W requirement of the primary part. Automotive AEC-Q200 certification and anti-sulfur features are application-specific enhancements that may be present or absent in substitute parts without affecting functional equivalence.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp (°C)	AEC-Q200	Product Status	Inventory
ERJ-S08F8061V	Panasonic	8.06 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155	Yes	Active	1010
ERJ-8ENF8061V	Panasonic	8.06 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155	Yes	Not For New Designs	50498
CR1206-FX-8061ELF	Bourns Inc.	8.06 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155	No	Active	52160
CRCW12068K06FKEA	Vishay Dale	8.06 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155	Yes	Active	4103
CRCW12068K06FKEAHP	Vishay Dale	8.06 kΩ	±1%	0.75	1206	±100ppm/°C	-55 to 155	Yes	Active	5974
RC1206FR-078K06L	YAGEO	8.06 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155	No	Active	12803
RMCF1206FT8K06	Stackpole Electronics Inc	8.06 kΩ	±1%	0.25	1206	±100ppm/°C	-55 to 155	Yes	Active	10912

Engineering Selection Recommendations

For Active Production Designs with Automotive Requirements: CRCW12068K06FKEA (Vishay Dale) and RMCF1206FT8K06 (Stackpole Electronics Inc) are direct equivalents with active product status and AEC-Q200 certification. Both maintain identical electrical specifications and package dimensions.

For Enhanced Power Dissipation: CRCW12068K06FKEAHP (Vishay Dale) provides 0.75W power rating while maintaining all other electrical and mechanical parameters. This part is suitable when circuit design requires margin above the 0.25W baseline.

For Non-Automotive Applications: CR1206-FX-8061ELF (Bourns Inc.) and RC1206FR-078K06L (YAGEO) are functionally equivalent but lack AEC-Q200 certification. These parts are appropriate for consumer and industrial applications where automotive qualification is not required.

For Legacy Design Support: ERJ-8ENF8061V (Panasonic) maintains full electrical equivalence but carries "Not For New Designs" status. This part is suitable only for sustaining production of existing designs or when existing inventory must be consumed.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF8061V be used as a direct replacement for ERJ-S08F8061V? A: Yes. Both parts are electrically and mechanically identical with matching resistance, tolerance, power rating, package, and temperature specifications. The primary difference is product lifecycle status: ERJ-8ENF8061V is designated "Not For New Designs" while ERJ-S08F8061V is active. For new designs, ERJ-S08F8061V is preferred.

Q: What is the difference between CRCW12068K06FKEA and CRCW12068K06FKEAHP? A: The primary difference is power rating. CRCW12068K06FKEA is rated 0.25W, while CRCW12068K06FKEAHP is rated 0.75W with pulse withstanding capability. All other electrical parameters are identical. The higher power rating part is suitable for applications requiring greater thermal margin.

Q: Are Bourns CR1206-FX-8061ELF and YAGEO RC1206FR-078K06L suitable for automotive applications? A: These parts meet all electrical and mechanical specifications but lack AEC-Q200 certification. They are suitable for non-automotive applications. For automotive designs, use parts with explicit AEC-Q200 rating.

Q: Do all substitute parts have identical physical dimensions? A: All parts use the 1206 (3216 Metric) package. Minor variations exist in maximum seated height (ranging from 0.024" to 0.030"), which are within standard PCB assembly tolerances and do not affect interchangeability in standard applications.

Q: What is the significance of MSL 1 (Unlimited) moisture sensitivity? A: MSL 1 indicates the component requires no special moisture control during storage or handling. All listed parts carry this rating, eliminating moisture-related compatibility concerns.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message