ERJ-S08F1960V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1960V is a 196 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The product is currently active and available in high volume inventory (939 pcs).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift toward alternative feature sets (such as higher power ratings or different environmental protections), or when supply chain optimization requires sourcing from multiple qualified manufacturers.

Key Parameters

Parameter	Value
Resistance	196 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1960V is determined by the following critical parameters:

Primary Substitution Criteria (Must Match):

Resistance value: 196 Ohms
Tolerance: ±1%
Package / Case: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Secondary Substitution Criteria (Flexible):

Power Rating: 0.25W (primary), 0.75W (acceptable for higher margin applications)
Automotive Rating: AEC-Q200 (preferred for automotive applications)
Manufacturer: Multiple qualified sources acceptable

The substitute parts are grouped into two categories:

Category A - Direct Equivalents (0.25W, 1/4W): ERJ-8ENF1960V, CRCW1206196RFKEA, RC1206FR-07196RL, RMCF1206FT196R. These parts match all primary parameters including power rating and are suitable for direct replacement in existing designs.

Category B - Higher Power Alternative (0.75W, 3/4W): CRCW1206196RFKEAHP. This part matches all primary parameters except power rating, which is elevated. This part is suitable for applications requiring additional thermal margin or pulse withstanding capability without circuit redesign.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Temp Range	AEC-Q200	Product Status	Inventory (pcs)
ERJ-S08F1960V	Panasonic	196 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Active	939
ERJ-8ENF1960V	Panasonic	196 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Not For New Designs	51351
CRCW1206196RFKEA	Vishay Dale	196 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Active	4468
CRCW1206196RFKEAHP	Vishay Dale	196 Ω	±1%	0.75	1206	±100ppm/°C	-55~155°C	Yes	Active	9357
RC1206FR-07196RL	YAGEO	196 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	No	Active	34197
RMCF1206FT196R	Stackpole Electronics	196 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Active	11319

Engineering Selection Recommendations

For Automotive Applications (AEC-Q200 Required): Select from CRCW1206196RFKEA (Vishay Dale), RMCF1206FT196R (Stackpole Electronics), or CRCW1206196RFKEAHP (Vishay Dale, if higher power margin is required). All three maintain active product status and full AEC-Q200 compliance. ERJ-8ENF1960V is not recommended for new designs despite high inventory availability.

For General Industrial Applications: RC1206FR-07196RL (YAGEO) is suitable when AEC-Q200 certification is not a design requirement. This part offers the highest inventory availability (34,197 pcs) and active product status.

For Supply Chain Optimization: Maintain qualified supplier relationships with both Panasonic (ERJ-S08F1960V primary, ERJ-8ENF1960V legacy) and Vishay Dale (CRCW1206196RFKEA). RMCF1206FT196R provides a third-source option for risk mitigation.

For Thermal Margin Enhancement: CRCW1206196RFKEAHP provides 3x power rating (0.75W vs 0.25W) within the same 1206 package footprint, enabling pulse withstanding capability without circuit board redesign.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1960V replace ERJ-S08F1960V in new designs? A: No. While electrically equivalent, ERJ-8ENF1960V carries "Not For New Designs" status. Use CRCW1206196RFKEA, RMCF1206FT196R, or CRCW1206196RFKEAHP for new designs.

Q: What is the difference between CRCW1206196RFKEA and CRCW1206196RFKEAHP? A: Both are Vishay Dale parts with identical electrical specifications (196 Ω, ±1%, -55~155°C). The primary difference is power rating: CRCW1206196RFKEA is 0.25W (1/4W), while CRCW1206196RFKEAHP is 0.75W (3/4W) with pulse withstanding capability. Both fit the 1206 package.

Q: Is RC1206FR-07196RL suitable for automotive applications? A: RC1206FR-07196RL lacks AEC-Q200 certification. For automotive applications requiring AEC-Q200 compliance, select CRCW1206196RFKEA, RMCF1206FT196R, or CRCW1206196RFKEAHP instead.

Q: Will these substitute parts fit the same PCB footprint? A: Yes. All substitute parts use the 1206 (3216 Metric) package. Physical dimensions vary slightly (length 3.10mm to 3.20mm, height 0.60mm to 0.70mm), but all are within standard 1206 footprint tolerances and are PCB-compatible.

Q: Which substitute offers the best inventory availability? A: RC1206FR-07196RL (YAGEO) has the highest inventory at 34,197 pcs. For AEC-Q200 qualified parts, RMCF1206FT196R (Stackpole) offers 11,319 pcs.

Q: Are all these parts RoHS3 compliant? A: Yes. All listed parts (main and substitutes) are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message